Introduction
Thank you for choosing the Lemorele G96 HDMI Switch. This device allows you to connect up to five HDMI input sources to a single HDMI display, providing a convenient way to manage multiple devices such as gaming consoles, Blu-ray players, and PCs. For optimal performance and to ensure safe operation, please read this manual thoroughly before use.
Figure 1: Lemorele G96 HDMI Switch and Remote Control
Package Contents
Please check the box for the following items:
- Lemorele G96 HDMI Switch x 1
- USB-C Power Cable x 1
- Infrared Remote Control x 1
- User Manual x 1
Product Overview
The Lemorele G96 HDMI Switch features a compact design with clearly labeled ports and indicators for easy setup and operation.
Front Panel
- Power Indicator: Lights up when the device is powered on.
- HDMI Input Indicators (1-5): Lights up to show the currently selected HDMI input source.
- Switch Button: Press to manually cycle through the HDMI input sources.
Rear Panel
- USB-C Power Supply Port: Connect the provided USB-C cable for power.
- HDMI OUT Port: Connect to your display (TV, monitor, projector).
- HDMI IN 1-5 Ports: Connect your HDMI source devices (gaming consoles, Blu-ray players, PCs, etc.).
Figure 2: Detailed View of the HDMI Switch and Remote
Setup
Follow these steps to set up your Lemorele G96 HDMI Switch:
- Connect Input Devices: Plug your HDMI source devices (e.g., PS5, Xbox, PC, Blu-ray player) into the HDMI IN 1-5 ports on the switch.
- Connect Output Device: Connect an HDMI cable from the HDMI OUT port on the switch to the HDMI input of your display (TV, monitor, projector).
- Connect Power: Insert the provided USB-C power cable into the USB-C Power Supply Port on the switch, and connect the other end to a USB power adapter (not included) or a USB port on your display/PC.
- Power On: Ensure all connected devices and the display are powered on.
Figure 3: Connection Diagram
Figure 4: Example Setup with Multiple Devices
Operating
Automatic Switching
The Lemorele G96 HDMI Switch supports intelligent automatic switching. When you power on a connected HDMI source device, the switch will automatically detect the active signal and switch to that input. If multiple devices are active, it will prioritize the last activated device or the lowest numbered active input.
Manual Switching
You can manually switch between HDMI input sources using two methods:
- Front Panel Button: Short press the 'Switch' button on the front panel of the device to cycle through the HDMI inputs (1-5). The corresponding indicator light will illuminate.
- Remote Control: Use the included infrared remote control. Press the numbered buttons (1-5) to directly select the desired HDMI input source. The 'NEXT' button can also be used to cycle through inputs.
Video 1: Product Showcase and Operation
Maintenance
- Keep the device in a cool, dry place away from direct sunlight, high temperatures, and humidity.
- Do not expose the device to water or other liquids.
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure proper ventilation around the switch to prevent overheating.
- Avoid dropping or subjecting the device to strong impacts.
Troubleshooting
No Signal on Display
- Ensure all HDMI cables are securely connected to both the switch and your devices/display.
- Verify that the USB-C power cable is connected and the switch's power indicator is on.
- Check if your display is set to the correct HDMI input source.
- Try selecting the input source manually using the switch button or remote control.
- Test with different HDMI cables, as faulty cables can cause signal issues.
- Ensure your source device is powered on and outputting a signal.
Flickering or Intermittent Signal
- Use high-quality HDMI cables, especially for 4K resolutions.
- Ensure the total length of HDMI cables (input + output) is not excessively long, which can degrade signal quality.
- Try reducing the resolution or refresh rate of your source device to see if the issue persists.
- Ensure the USB-C power supply is stable and sufficient.
Remote Control Not Working
- Ensure there are no obstructions between the remote control and the switch's IR receiver.
- Check the battery in the remote control and replace it if necessary (battery type typically CR2025, not included).
- Point the remote directly at the front of the HDMI switch.
Specifications
| Feature | Description |
|---|---|
| Product Name | HDMI 5-In-1 Switch |
| Model | G96 |
| Ports | HDMI IN x 5, HDMI OUT x 1 |
| Function | Connect multiple devices to a single monitor/TV |
| Switching Method | Panel Button / Infrared Remote Control |
| HDMI Version | 2.0 |
| Resolution Support | Up to 4K@60Hz (also supports 1080p and lower resolutions) |
| HDCP Support | HDCP2.3 |
| HDR Support | Yes |
| Material | ABS |
| Dimensions | 160 x 57 x 18 mm (6.3 x 2.2 x 0.7 inches) |
| Power Supply | USB-C (5V/1A recommended) |
Figure 5: Product Dimensions
User Tips
- Leverage Auto-Switching: Many users find the automatic switching feature very convenient. When you turn on a console or device, the switch will often change to that input without you needing to press any buttons.
- Remote for Manual Control: If you have multiple devices on simultaneously, use the remote control to easily switch between them. This avoids needing to reach for the switch itself.
- Cable Quality Matters: For the best 4K experience, especially with HDR, ensure you are using high-quality HDMI 2.0 (or higher) certified cables.
Warranty and Support
Lemorele products are designed for reliability and performance. For any warranty claims, technical support, or inquiries, please contact your original point of purchase or the manufacturer's customer service. Please retain your proof of purchase for warranty service.