Milfra KS811

Contents

Milfra Tuya Zigbee Smart Wall Switch User Manual

Model: KS811

1. Product Overview

The Milfra Tuya Zigbee Smart Wall Switch (Model KS811) is a smart lighting control device designed to integrate with your smart home ecosystem. It offers physical push-button control, voice control via Amazon Alexa and Google Home, and remote control through the Smart Life mobile application. This switch is available in 1-gang, 2-gang, and 3-gang configurations.

Milfra Tuya Zigbee Smart Wall Switch in 1-gang, 2-gang, and 3-gang versions

Figure 1: Milfra Tuya Zigbee Smart Wall Switch (1-gang, 2-gang, and 3-gang models)

2. Setup and Installation

2.1 Pre-installation Notes

  • This smart switch requires a Zigbee hub for smart functionality.
  • Supports only 2.4GHz Wi-Fi networks (IEEE802.15.4 Zigbee standard).
  • Designed for one-way/single-pole circuits only; not compatible with 3-way switches.
  • A neutral wire is typically required for operation. Some models may offer a 'No Neutral Wire' option; verify your specific model's requirements.
  • Basic electrical wiring knowledge is necessary. If unsure, consult a professional electrician.
  • The ON/OFF button can also serve as a reset button. Long-press to restore factory defaults.
  • Intended for controlling lamps; not recommended for other electrical breakers.

2.2 Safety Notice

Always cut off power at the circuit breaker before beginning any installation work to prevent electrical shock.

2.3 Installation Guide

  1. Turn Off Circuit Breaker: Locate the circuit breaker controlling your light switch and turn it off. Verify power is off by flipping the light switch a few times.
  2. Find the Neutral Wire: In the wall cassette, look for one or more white wires typically secured with a wire nut. This is your neutral wire. If you cannot locate a neutral wire, consult a professional electrician.
  3. Label Your Wires: Before removing your old switch, clearly label or record the corresponding line, load, and neutral wires.
  4. Install the Smart Switch: Use wire-nuts to connect the smart switch wires to your home's electrical wires according to the wiring diagram below. Ensure line and load wires are correctly matched. Secure the switch into the wall box and attach the faceplate.
Wiring diagram for Milfra Smart Wall Switch showing connections for Line, Neutral, Load, and Ground

Figure 2: Wiring Diagram (Example for 1-gang switch)

  1. Turn On Circuit Breaker: Restore power to the switch from your circuit breaker.
  2. Check Wi-Fi Light: Press the switch a few times to confirm operation. The Wi-Fi indicator light should blink rapidly (approximately 2 times per second) when ready for pairing.

2.4 App Installation and Pairing

  1. Install 'Smart Life' App: Download the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.