DATA FROG P02

Contents

DATA FROG P02 Bluetooth-Compatible Game Controller User Manual

Introduction

Thank you for purchasing the DATA FROG P02 Wireless Controller. This controller is designed for a versatile gaming experience, compatible with PlayStation 4 (PS4, PS4 Slim, PS4 Pro), PC (Desktop & Notebook), and mobile devices (iOS & Android). Please read this manual thoroughly before use to ensure proper setup and optimal performance.

DATA FROG P02 Wireless Controller compatible with Steam, PC, Notebook, PS4, Apple/Android
The DATA FROG P02 Wireless Controller, compatible with multiple platforms.

Key Features

  • Bluetooth-Compatible: Seamless wireless connection to supported devices.
  • Dual Vibration: Enhanced haptic feedback for immersive gameplay.
  • Touchpad with Light Bar: Interactive touchpad and an integrated light bar for visual cues.
  • 3.5mm Headphone Audio Jack: Connect your headset for in-game audio and communication.
  • 6-Axis Motion Sensor: Precise motion control for compatible games.
  • Built-in Speaker: Experience additional audio details directly from the controller.
Controller showing touchpad light bar
The touchpad light bar provides visual feedback during gameplay.
Controller showing 3.5mm headphone audio jack
Connect a 3.5mm headset for audio.
Controller illustrating 6-axis motion sensor
The 6-axis motion sensor allows for intuitive control.
Controller highlighting built-in speaker
Listen to in-game details through the built-in speaker.

Safety and Handling Precautions

To ensure safe and prolonged use of your controller, please observe the following precautions:

  • Prolonged Use: Avoid prolonged use. Take breaks at approximately 30-minute intervals.
  • Discomfort: Stop using the unit immediately if you experience fatigue, discomfort, or pain in your hands or arms. Consult a doctor if symptoms persist.
  • Hearing Safety: Permanent hearing loss can occur if headsets or headphones are used at high volume. Set the volume to a safe level. Limit high-volume usage and avoid raising volume to block out noisy surroundings. Lower the volume if you cannot hear people speaking nearby.
  • Vibration Function: The vibration function may aggravate injuries. Do not use this function if you have any ailment or injury to bones, joints, or muscles in your hands or arms. Note that some software enables vibration by default. To disable it, go to (Settings) > [Devices] > [Controllers] and uncheck [Enable Vibration].
  • Motion Sensor: When using the motion sensor, be cautious of your surroundings. Ensure ample space to avoid hitting people or objects, which could cause accidental injury or damage. Grip the controller firmly to prevent it from slipping.
  • Temperature and Humidity: Do not expose the product to high temperatures, high humidity, or direct sunlight.
  • Liquids and Objects: Do not allow the product to come into contact with liquids. Do not place heavy objects on the product.
  • Physical Shock: Do not throw, drop, or subject the product to strong physical shock.
  • USB Cable Connection: If using the controller with a USB cable (e.g., with a PS4 system), ensure enough cable slack to prevent it from hitting people or objects, and avoid pulling the cable out forcefully.

Exterior Protection

  • Do not place rubber or vinyl materials on the product exterior for extended periods, as this may cause deterioration or discoloration.
  • Clean the product with a soft, dry cloth. Do not use solvents or other chemicals, nor chemically-treated cleaning cloths.

Setup and Pairing

Registering (Pairing) the Controller

The first time you use the controller, or when connecting to a new device, you must perform a device registration (pairing) process.

PlayStation 4 System

  1. Turn on your PS4™ system.
  2. Connect the controller to the PS4™ system using the provided USB cable. This will complete the device registration.
Compatibility with PS4 Original, PS4 Slim, PS4 Pro consoles
The controller is suitable for PS4 Original, PS4 Slim, and PS4 Pro.

iPhone & iPad (iOS 13 or later)

  1. Ensure your iPhone or iPad is updated to iOS 13 or later.
  2. On your iPhone/iPad, go to Settings > Bluetooth and ensure Bluetooth is turned ON.
  3. Press and hold the SHARE button and the PS button on the controller simultaneously for about 3-5 seconds. The indicator light on the top of the joystick will flash quickly, indicating it's in pairing mode. (Note: Pairing mode cannot be entered while charging).
  4. On your iPhone/iPad, in the Bluetooth device list, select "DualShock 4 Wireless Controller" to complete pairing.

Android Phones (Android 10 or later)

  1. Ensure your Android phone or tablet is updated to Android 10 or later.
  2. Press and hold the SHARE button and the PS button on the controller simultaneously for about 3-5 seconds. The top indicator light will flash white, indicating it's in pairing mode. (Note: Pairing mode cannot be entered while charging).
  3. On your Android device, go to Settings > Bluetooth and ensure Bluetooth is turned ON. Search for new devices.
  4. Select "Wireless Controller" from the list of available devices to pair.

Laptop/PC Connection

A. Wired Connection
  1. Connect the controller to your computer using a USB cable.
  2. The necessary drivers will be installed automatically. You can verify the installation in "Control Panel" > "Devices and Printers" (the device may appear as "Wireless Controller").
White DATA FROG controller with USB cable and product packaging
The controller comes with a USB cable for wired connection and charging.
B. Wireless Connection (Bluetooth)

Before proceeding, ensure your laptop/PC has Bluetooth functionality. If not, a USB wireless Bluetooth receiver (not included) is required.

  1. If using a USB wireless Bluetooth receiver, insert it into your PC. The driver will install automatically.
  2. Turn on your PC's Bluetooth function.
  3. Press and hold the SHARE and PS buttons on the controller simultaneously for about 3-5 seconds until the joystick indicator light at the top flashes white (pairing mode cannot be entered during charging).
  4. On your PC, go to "Settings" > "Devices" > "Add Device", then select "Bluetooth". Your computer will start detecting nearby Bluetooth devices.
  5. Select "Wireless Controller" from the detected devices to pair.
  6. The computer will automatically pair with the controller and install necessary device drivers.
  7. Once connected, the light bar on the controller will show a bright white light.

Macbook Connection

  1. Go to "System Preferences" and select "Bluetooth".
  2. Click "Turn Bluetooth on".
  3. If Bluetooth is already on, turn off the device first, then press the power button for 5-10 seconds to enter pairing status (Bluetooth indicator will flash continuously).
  4. Press and hold the SHARE button and the PS button on the controller simultaneously for about 3-5 seconds. The top indicator light will flash white. (Cannot enter pairing mode while charging).
  5. In Bluetooth preferences, you should see "PLAYSTATION (4) Controller". Click "Pair" to connect.

Operation

Turning Off the Controller

When you are finished playing, you can turn off the controller by simultaneously pressing and holding the L1 + R1 + PS buttons for 5-7 seconds until the light bar turns off.

Game Compatibility

Before playing, confirm that the game supports external controllers, as some games may not be fully compatible or may not utilize all controller functions. The controller is generally compatible with games on Steam™ platform.

Known compatible games include:

  • Oceanhorn, Fortnite, DEAD TRIGGER 2, LEGO® Star Wars™ (all LEGO series), ArcaneSoul, Bastion, THE KING OF FIGHTERS-2012, The Bard's Tale, Grand Theft Auto: San Andreas (all GTA series), Secret of Mana, Godfire: Rise of Prometheus, AVABEL ONLINE, Chronology, Star Wars: The Force Unleashed II, BioShock, Asphalt 8: Airborne, NBA 2K19, Steam Link, Assassin's Creed: Identity, Black Desert Mobile, Assoluto Racing, All Goat Simulator series, All FF series (e.g., FINAL FANTASY IV), Riptide GP3, Zombieville USA 2, Zombie Gunship Arcade, Jade Empire™: Special Edition, Adventures of Mana, Animus - Harbinger, Inside, Virtua Tennis Challenge.

In some games, not all controller functions may work properly. To verify controller functionality, you can test all buttons on your PC.

Maintenance

Battery Care

  • The built-in lithium-ion battery has a limited lifespan, which will gradually decrease with repeated usage and age. Battery life also varies depending on storage methods, conditions of use, and environmental factors.
  • Charge the controller in an environment where the temperature is between 10°C-30°C (50°F-86°F). Charging outside this range may be less effective.
  • If the wireless controller is not used for an extended period, it is recommended to fully charge it at least once a year to help maintain battery functionality.
  • Do not handle damaged or leaking lithium-ion batteries.

Troubleshooting

  • Controller Unresponsive: If the controller becomes unresponsive, locate the reset button in the small hole on the back of the controller and press it to reset.
  • PC Bluetooth Connectivity Issues: Ensure your PC has built-in Bluetooth or use a dedicated USB wireless Bluetooth receiver. Follow the pairing steps carefully.
  • Speaker and Headphone Functions: Note that the speaker and headphone functions of the controller are only available when used with a PS4 console.

Specifications

Feature Specification
Input Power Rating 5V - 800 mA
Battery Type Built-in rechargeable Lithium-Ion battery
Voltage 3.7V
Battery Capacity 600 mAh
Operating Temperature 5°C-35°C (41°F-95°F)
Interface Type Bluetooth
Compatible Platform PlayStation (PS4, PS4 Pro, PS4 Slim), PC, iOS, Android
Certifications CE, FCC, RoHS
Package Dimensions (L x W x H) 18 cm x 15 cm x 8 cm
Package Weight 0.279 kg

Design and specifications are subject to change without notice.

User Tips

  • The controller can be connected to a PC via a USB cable for wired play, in addition to wireless Bluetooth connection.
  • The controller features a motion sensor, which enhances gameplay in compatible titles.
  • It is compatible with iOS and Android mobile devices, allowing for gaming on the go.
  • While not explicitly listed, if your Android TV supports standard Bluetooth gamepads, this controller is likely compatible.

Support and Further Information

For more detailed instructions, diagrams, and troubleshooting, please refer to the complete user manual available in PDF format:

You can view the full user manual here (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.