SIMICAM 4K PoE/DC Bullet IP Camera

Contents

SIMICAM 4K PoE/DC Bullet IP Surveillance Camera User Manual

Model: 4K PoE/DC Bullet IP Camera

Brand: SIMICAM

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SIMICAM 4K PoE/DC Bullet IP Surveillance Camera. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

SIMICAM 4K Bullet IP Camera

Image: Front view of the SIMICAM 4K Bullet IP Camera, showing the lens and IR LEDs.

2. Safety Information

  • Ensure the power supply (PoE or DC 12V) matches the camera's requirements. Incorrect voltage can damage the device.
  • Do not expose the camera to extreme temperatures, humidity, or corrosive environments.
  • Avoid direct exposure of the lens to strong light sources for extended periods.
  • Installation should be performed by qualified personnel if working with electrical wiring.
  • Keep the camera clean and free from dust to ensure optimal performance.

3. Package Contents

Please check the package contents upon unboxing:

  • SIMICAM IP Camera
  • Mounting Screws and Plugs
  • User Manual (PDF available online: View PDF Manual)
  • (Power adapter not included for PoE models, may be included for DC 12V models depending on purchase)

4. Product Overview and Features

The SIMICAM IP Camera is a high-definition surveillance solution designed for both indoor and outdoor use. Key features include:

  • High Definition: Available in 4MP, 5MP, and 8MP (4K) resolutions.
  • Power over Ethernet (PoE): Simplifies installation by providing power and data through a single Ethernet cable (for PoE models).
  • Audio Recording: Built-in microphone for sound video recording.
  • Night Vision: Infrared (IR) LEDs for clear vision in low-light conditions (approx. 10-30m IR distance).
  • Motion Detection & Email Alerts: Configurable motion detection with email notification capabilities.
  • ONVIF Compatibility: Supports ONVIF 2.0-2.4, compatible with NVRs from Dahua, HIKVISION, SIMICAM, and other ONVIF-compliant systems.
  • Weatherproof: IP66 rated for outdoor use.
  • Video Compression: H.265 for efficient storage and bandwidth usage.
Camera with audio recording feature

Image: Diagram illustrating the camera's built-in microphone for audio recording.

Motion detection and email alerts

Image: Visual representation of motion detection triggering email alerts.

ONVIF compatibility with NVRs

Image: Diagram showing ONVIF compatibility with various NVR brands like Dahua and Hikvision.

5. Setup Guide

5.1 Physical Installation

The camera supports various installation methods:

  • Ceiling Mount
  • Normal (Desktop)
  • Wall Mounted
  • Pendant Mount
  • Vertical Pole Mount

Use the provided screws and plugs to securely mount the camera in your desired location. Ensure the mounting surface is strong enough to support the camera's weight.

5.2 Wiring and Connectivity

The camera can be connected to your surveillance system in several ways:

5.2.1 Working with PoE NVR

Connect the PoE camera directly to a PoE port on your PoE NVR using an Ethernet cable. The NVR will provide both power and data. Connect your NVR to a network router for internet access and to a monitor (via HDMI or VGA) for local viewing. An optional mouse can be connected to the NVR for control.

5.2.2 Working with PoE Switch

Connect the PoE camera to a PoE port on a PoE switch or PoE injector using an Ethernet cable. The PoE switch/injector will provide power. Connect the PoE switch to your network router. Your NVR or PC can then connect to the same network for camera access.

5.2.3 Working with DC 12V Power Adapter (for non-PoE or alternative power)

If using a DC 12V power adapter, connect the camera to the adapter and then connect the camera to your network router via an Ethernet cable. This setup allows the camera to function as a standard IP camera.

PoE Camera Wiring Diagram with NVR

Image: Detailed wiring diagram showing a PoE camera connected to a PoE NVR, which is then connected to a network, audio output, mouse, and display monitors (VGA/HDMI).

5.3 Initial Configuration: Modifying IP Address

The camera is set to DHCP by default (Username: admin, Password: 123456). You can modify its IP address using the IPCBatch Tool software.

  1. Download IPCBatch Tool: Obtain the software from the provided link in the PDF manual or seller's resources.
  2. Search for Camera: Run the IPCBatch Tool. It will scan your network and list connected cameras.
  3. Modify IP Address: Select your camera from the list. You can set a fixed IP address. Ensure the IP address's network segment is consistent with your NVR, computer, and LAN (e.g., if camera IP is 192.168.1.10, your NVR/PC/LAN should also be in the 192.168.1.x range).
  4. Apply Changes: After setting the desired IP, click "Apply" to save the changes.

Note: The PDF manual contains screenshots of the IPCBatch Tool interface for IP address modification.

5.4 Browser Access and Camera Settings

For advanced settings, you can access the camera's web interface via a browser. It is recommended to use Internet Explorer (IE) on Windows, as it may require a browser plug-in for full functionality.

  1. Enter IP Address: Open IE and type the camera's IP address (e.g., http://192.168.0.100) into the address bar and press Enter.
  2. Install Plug-in: If prompted, install the necessary browser plug-in.
  3. Login: Enter the default username (admin) and password (123456) to log in.
  4. Enable "Full Netcom" and "IP Adaptive": Ensure these two functions are enabled in the camera settings. If your NVR cannot find the camera, these settings might be disabled.

Note: The PDF manual contains screenshots of the browser login page and settings.

5.5 Mobile App Setup (Watilon)

For remote monitoring and control, use the "Watilon" mobile application.

  1. Download App:
    • iPhone: Search "Watilon" in the Apple App Store.
    • Android: Search "Watilon" in the Google Play Store or scan the QR code provided in the manual.
  2. Network Connection:
    • Connect the camera to your LAN switch/router.
    • On your phone, turn off mobile data, turn on Wi-Fi, and connect to the same local area network as the camera.
  3. Register and Login: Open the Watilon app, register a new user account, and log in.
  4. Add Device:
    • In the app, select "Add Device".
    • You can use the "Discover" function to find devices on your local network.
    • Alternatively, scan the camera's QR code (found in the camera's web interface or via IPCBatch Tool) or manually enter the device details.
    • Follow the on-screen prompts to complete the addition process.
P2P Cloud Remote View and XMEYE App QR codes

Image: Diagram showing P2P cloud remote view setup and QR codes for downloading the XMEYE app (Note: Manual specifies Watilon, but XMEYE is also a common app for similar cameras).

6. Operating Instructions

6.1 Motion Detection and Email Alerts

Configure motion detection to receive alerts when activity is detected.

  1. Access Settings: Log in to the camera's web interface (via browser) or use the mobile app. Navigate to "Alarm Manager" -> "Motion Detect".
  2. Enable Motion Detect: Check "Alarm Enable".
  3. Set Detection Area: Define the motion detection area on the video feed.
  4. Configure Email Alerts:
    • Check "Send Email" under the motion detection settings.
    • Configure your email server (SMTP) settings, including server address, port, username, password (often an app-specific password or authorization code from your email provider), and recipient email addresses.
    • Ensure your email provider's security settings allow third-party applications to send emails (e.g., lower security level for less secure apps, or generate an app password).

Note: Some camera models may not support email alarms. Refer to the PDF manual for detailed screenshots of motion detection and email settings.

6.2 Night Vision Mode Selection

You can select different night vision modes to suit your surveillance needs:

  1. Access Settings: In the camera's web interface, navigate to "Lamp Board" -> "Day Night Switch".
  2. Select Mode:
    • InfraredLight: Infrared light on at night, black and white video.
    • WhiteLight: White light on at night, full color video.
    • DualLight: Infrared light on (B&W video) when no one is present. When motion is detected, white light turns on (color video).

Note: The PDF manual contains screenshots for selecting night vision modes.

6.3 Time Zone and Time Settings

Ensure the camera's time is accurate for proper event logging.

  1. Access Settings: In the camera's web interface, navigate to "System Manager" -> "Time Setting".
  2. Configure Time Zone: Select your local time zone.
  3. Set Time: Manually set the date and time or synchronize with an NTP server.

Note: The PDF manual contains screenshots for time settings.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the camera body. For the lens, use a lens cleaning cloth and solution. Do not use harsh chemicals.
  • Firmware Updates: Periodically check the manufacturer's website or contact support for firmware updates to ensure optimal performance and security.
  • Cable Inspection: Regularly inspect all cables for damage, especially for outdoor installations.

8. Troubleshooting

ProblemPossible CauseSolution
Camera not found by NVR/IPCBatch ToolNetwork segment mismatch; "Full Netcom" or "IP Adaptive" disabled; faulty cable/connection.Ensure IP address network segment matches your LAN. Check "Full Netcom" and "IP Adaptive" settings. Verify Ethernet cable and power.
No image on monitor/appNo power; incorrect network configuration; camera offline.Check power supply. Verify network connection. Ensure camera is online and accessible via its IP.
Motion detection not working/no email alertsMotion detection not enabled; incorrect email settings; email provider blocking.Enable motion detection. Double-check SMTP settings, username, password. Check spam folder. Adjust email provider security settings.
Poor night visionIR LEDs obstructed; incorrect night vision mode; insufficient IR distance.Clear any obstructions. Select appropriate night vision mode. Ensure objects are within IR range.

9. Specifications

FeatureDetail
Brand NameSIMICAM
StyleBullet Camera
High Definition8.0 Megapixels (4K)
Megapixels8MP
Lens (mm)3.6mm, 6mm, 8mm, 2.8mm (various options)
ConnectivityRJ45 (Ethernet)
Power SupplyWith Poe (48V) / DC 12V
Video Compression FormatH.265
IR Distance (m)About 10-30M
Minimum Illumination (Lux)0.01lux
Viewing Angle90°
IP RatingIP66 (Waterproof / Weatherproof)
SceneIndoor and outdoor
InstallationCeiling, Normal, Wall Mounted, Pendant Mount, Vertical Pole Mount
Shell MaterialPlastic
Dimensions (L x W x D)(mm)12*8*8
Supported Operating SystemsNo (refers to direct OS support on camera, works with NVR/PC software/apps)
CertificationCE

10. User Tips

  • NVR Compatibility: Many users confirm compatibility with various NVRs, including Hikvision and Dahua, due to ONVIF support. Ensure your NVR also supports the camera's resolution (e.g., 4K).
  • Default Password: The default password is often 123456. Change it after initial setup for security.
  • Software for PC: For better settings and management on PC, consider using SIMICAM VMS software or Agent DVR.
  • Mobile App: While the manual suggests "Watilon", some users find success with "Onvier" or "Xmeye" for Android.
  • IP Address Change: If you need to change the IP address, use the IPCBatch Tool and ensure the camera's IP segment matches your network.
  • Outdoor Use: While rated IP66, some users recommend installing it in a location protected from direct heavy rain for longevity, as the body is plastic.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to your purchase documentation or contact the seller directly. You can also refer to the full PDF user manual for additional technical support contact details.

Technical Support Email (as per PDF): 453836824@qq.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.