1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your CARABC Wireless Carplay Android Auto Decoder. This device allows you to integrate Apple CarPlay and Android Auto functionalities into your vehicle's existing infotainment system without changing the original screen.

Figure 1: Wireless CarPlay & Android Auto integration
Product Features:
- Supports Wireless Apple CarPlay and Android Auto.
- Supports wireless phone screen mirroring (AirPlay/Autolink).
- Integrated navigation, Siri/Google Assistant control, phone calls, and media playback.
- Supports rear view video input (CVBS signal).
- Utilizes Sunplus SPHE8368-U chip (800MHz) with LINUX system for stable performance.
- Supports multi-format video output (Analog CVBS, LVDS HD, Digital RGB888).
- High-quality audio output and original MIC support.
- Plays 1080P multi-format video (H.264).
- Supports USB-HOST connection.
- Extendable for front view camera and DVR.
2. Specifications
| Feature | Specification |
|---|---|
| Chip | Sunplus SPHE8368-U |
| Main Frequency | 800MHz |
| OS | Linux Gemini |
| RAM/ROM | 128MB/256MB |
| Audio Format Support | MP3, WMA, AAC, FLAC, WAV |
| Video Format Support | AVI, MKV, MP4, FLV, MPEG, H.264 |
| Dimensions (Host) | 140mm x 105mm x 25mm (L*W*H) |
| Working Voltage | DC 5V (±0.3V) |
| Working Temperature | -40°C ~ +85°C |
| Bluetooth Standard | Bluetooth V2.1+EDR |
| Bluetooth Frequency | 2402MHz-2480MHz |
| WiFi Frequency | 2.4GHz & 5.8GHz |
| USB Port | 1 Group |
3. Package Contents
Please check the package contents carefully upon receipt:
- 1x CARABC Wireless Carplay Android Auto Decoder Host Unit
- 1x Power Cable
- 1x RCA/USB Cable
- 1x LVDS Cable
- 1x WI-FI Antenna

Figure 2: Decoder host unit and included accessories
4. Setup and Installation
4.1. Compatibility
This decoder is designed for Land Rover and Jaguar vehicles equipped with a Bosch Host System and a 7-inch or 8-inch screen. It is not compatible with Harman Host Systems.
Applicable Models:
- Land Rover: Discovery 4 (2011-2016), Evoque (2011-2016), Range Rover (2011-2017), Freelander 2 (2011-2015)
- Jaguar: XE (2012-2016), XF (2012-2016), XJL (2011-2016), F-TYPE (2012-2016), F-PACE (2015-2016)

Figure 3: Compatible models and host identification guide
4.2. Installation Steps
Installation typically involves disassembling parts of your car's dashboard to access the head unit and screen connections. It is recommended to watch an installation video specific to your car model or seek professional assistance if you are unsure.
- Connect the Original Car Power.
- Connect the plug of the Original Car Power Cable.
- Connect the Navigation Video Cable.
- Connect the Original Car Video Cable.
- Connect the WiFi Antenna.
- Connect the USB port.
- Connect Aftermarket CAM power supply (blue line) if applicable.
- Connect Reversing Detection Line (brown wire) if applicable.
- Connect Aftermarket Front Camera Port if applicable.
- Connect Aftermarket Rear Camera Port if applicable.

Figure 4: Installation wiring diagram
4.3. Dip Switch Settings
The DIP switches on the decoder unit need to be configured according to your vehicle's screen size and model for proper display.
| Switch 1 | Switch 2 | Switch 3 | Switch 7 | Car Model | Switch 8 |
|---|---|---|---|---|---|
| OFF | OFF | OFF | / | 2011-2017 Discovery, 2015-2018 Jaguar, 2015-2017 Range Rover | // |
| Switch 4 | Switch 5 | Switch 6 | Screen Size | Note |
|---|---|---|---|---|
| OFF | OFF | / | 800*480-1 | Default |
| OFF | ON | / | 800*480-2 | According to the left |
| ON | OFF | / | 800*480-3 | According to the upper |

Figure 5: DIP switch settings and original car button interaction
5. Operating Instructions
5.1. Switching to CarPlay/Android Auto Interface
After installation, you can switch to the CarPlay/Android Auto interface by pressing the