HKIXDISTE HK-AHDCAM-06

Contents

HKIXDISTE AHD CCTV Surveillance Camera User Manual

Model: HK-AHDCAM-06

Brand: HKIXDISTE

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your HKIXDISTE AHD CCTV Surveillance Camera. Please read this manual thoroughly before use to ensure proper functionality and safety.

The HKIXDISTE AHD Camera is a high-definition surveillance camera designed for both indoor and outdoor use, featuring advanced H.265 video compression, face detection, motion alerts, and remote access capabilities.

2. Safety Warnings and Cautions

⚠ Cautions:

  • Always modify the default user password upon initial setup to prevent unauthorized access.
  • Do not install the camera in wet, dusty environments, or locations easily accessible to children.
  • Ensure the camera is installed in a well-ventilated area, and do not block its air vents.
  • Operate and store the camera within the specified temperature range. Do not attempt to dismantle the unit.
  • This product is designed for safe use in non-tropical climates.

⚠ Special Announcement:

  • This instruction manual is for reference only. The actual product may vary.
  • Product specifications and features are subject to change without prior notice.
  • In case of discrepancies between the manual and the product, please refer to the product's actual explanation.

3. Product Features

  • Ultra HD High Definition Video Display.
  • Advanced H.265 Video Compression.
  • Durable metal material, IP66 Waterproof rating, suitable for indoor and outdoor use.
  • Supports AI Human Face Detection and Face Playback.
  • Provides maximum detail and clarity in surveillance video images.
  • Supports Ultra HD Day/Night Vision with a transmission distance of up to 500 meters.
  • Equipped with IR-CUT dual filter switch for clear day and night monitoring without color distortion.
  • Motion Detection, Email Alerts, and Video Playback.
  • Supports Android, iPhone, iPad, and PC for P2P remote viewing.
  • Remote Access Anywhere, Anytime.
  • Suitable for various applications including home, supermarket, hotel, garden, factory, and office.

Video: Overview of HKIXDISTE AHD Camera features including Ultra HD, Face Recognition, H.265+, Motion Detection, Email Alerts, IP66 Waterproof, 3 years warranty, and Remote Access.

IP66 Weatherproof Camera

Image: The camera is IP66 professional security surveillance camera for Outdoor/Indoor use, resistant to rain, snow, and lightning.

Remote Viewing Anywhere, Anytime

Image: Remote viewing is possible from anywhere and anytime via smartphone, tablet, or PC with advanced P2P technology. No port forwarding needed.

4. Specifications

AttributeValue
Brand NameHKIXDISTE
Model NumberHK-AHDCAM-06
Focus3.6mm
Audio OutputNone
Supported Operating SystemsWindows 10, Windows 8, Windows 7, Windows Vista
Supported Mobile SystemsIOS, Android
Alarm ActionEmail Photo
Video Compression FormatH.265
Viewing Angle90°
Lens (mm)3.6mm
ConnectivityClosed System/CCTV Wired
Sensor BrandSony
Horizontal Resolution8MP (also available in 5MP and 2MP variants)
Sensor Size1/3"
StyleBullet Camera
SensorCCD
Focal Length3.6mm
InstallationNormal
TechnologyINFRARed
OriginMainland China
CertificationCE

Note: The camera is available in 8MP and 5MP versions. The 8MP version is shown in the main product image, while the 5MP version is also available.

HKIXDISTE 8MP AHD Camera

Image: HKIXDISTE 8MP AHD Camera, featuring Ultra HD and Face Detection capabilities.

HKIXDISTE 5MP AHD Camera

Image: HKIXDISTE 5MP AHD Camera, also featuring Ultra HD and Face Detection capabilities.

5. Setup and Installation

5.1. Connection Diagram

The CCTV AHD Camera system is plug and play, making it easy to set up. Remote viewing is available anywhere, anytime.

Connection Diagram for HD CCTV DVR System

Image: Detailed connection diagram for the HD CCTV DVR System. It illustrates how to connect the HD Camera to the 8CH AHD DVR using video cables and 12V power. The DVR connects to a TV/Monitor via HDMI or VGA, and to a router for remote viewing. Audio input/output, USB for mouse/U-disk are also shown.

Note: Ensure all cables are securely connected before turning on the power. The system supports hybrid access for IP cameras and coaxial cameras.

5.2. Back Panel Interface Overview

The DVR back panel includes various interfaces for connectivity:

IconName
=DC Power Input
AC Power Input
Power Switch
VGA Output
HDMI Output
Internet Interface (LAN)
USB Interface
A-INAudio Frequency Input
A-outAudio Frequency Output
Alarm-inAlarm-in
Alarm-outAlarm-out
RS485485 Interface
RS232232 Interface
BNC Output (Video Out)

The instructions provide as much as possible the interface description, but does not mean that this product has this interface, please prevail in kind.

5.3. Hard Disk Installation (Optional)

If you do not need to store recordings, you may skip this step.

  1. Remove the side and tail board screws and take off the cover board of the DVR.
  2. Connect the power and data cables to the hard disk and embed it into the DVR chassis.
  3. Use screws to fasten the hard disk to the chassis baseplate.
  4. Align the cover with the card slot, close it, and tighten the screws.

Recommendation: A professional monitoring hard disk is recommended for optimal performance.

6. Operating Instructions

6.1. Power On Operation

Turn on the power switch (if present) and wait for the system to start. The system will boot up and display the image on the screen (for analog channel mode with coaxial camera access).

6.2. Initialization Settings

Upon system startup, follow the boot wizard prompts to log in. The default login credentials are:

  • User Name: admin
  • Password: (none) - leave blank

Click "OK" to proceed. Remember to change the default password for security reasons.

6.3. Front Panel Key Functions

The front panel of your DVR may include various buttons for direct control:

IconFunctionIndicatorDescription
Play/PausePlay/Pause videoPower indicator lightIndicates power status
Play the last filePlay previous recordingLink indicator lightIndicates network link status
Play the next filePlay next recordingRecord indicator lightIndicates recording activity
Playback/PausePlayback controlShift indicator lightShift function
Stop playbackStop current playbackAlarm indicator lightIndicates alarm status
SearchVideo searchESCCancel operation
AlarmAlarm-out triggerModePicture drift mode
Zoom-Zoom decreaseRECVideo control
Zoom+Zoom increasePTZCloud control
PresetPreset viewMenuMain menu access
USB interfaceUSB portShiftShift function
DirectionNavigationFNAssistant function
OKConfirm selectionShuttleShuttle control

Note: Key instructions may provide more functions than listed. The product's actual features prevail.

6.4. Channel Type Setting

This product supports Hybrid ADVR, allowing for pure analog, hybrid, or pure network input. To switch between channel types:

  1. Right-click to open the main menu.
  2. Navigate to [System] > [Channel Management] > [Channel Type].
  3. Select the desired channel type (e.g., analog, hybrid, or network) and confirm.

Switch mode according to actual needs.

6.5. Record Setting

The recorder can automatically identify picture channels and start recording. For specific video recording settings:

  1. Right-click to open the main menu.
  2. Navigate to [Record] > [Record conf.].
  3. Configure the following settings:
    • Channel: Select specific channels or "All" for all channels.
    • Length: Set the length of each video file (default is 60 minutes).
    • Period: Enable time slot video recording for specific periods.
    • Video type: Set the video type for easier searching during playback.

6.6. Video Playback

To play back recorded video:

  1. Right-click to open the main menu.
  2. Navigate to [Record] > [Playback].
  3. Use the playback interface to:
    • Control playback (play, pause, stop).
    • Select video type.
    • Navigate using the progress bar.
    • Choose specific playback channels.
    • View video by calendar time or by file.
Face Detection and Face Playback

Image: Face Detection and Face Playback feature. The system automatically captures face images and allows quick playback of face videos, saving time and ensuring no details are missed.

6.7. Motion Detection and Email Alerts

Configure motion detection to receive alerts when activity is detected in specified areas.

  1. Set up the desired area for motion detection.
  2. When triggered, the system will send an email notification, providing real-time information.
Motion Detection & E-mail Alert

Image: Motion Detection and E-mail Alert in action. Shows a detected intruder and a mobile phone displaying the alert, allowing users to get first-hand information.

6.8. Day/Night Vision

The camera features a smart IR-Cut filter that automatically switches between day and night modes. This reduces color cast during the day and enhances image brightness at night, ensuring vivid surveillance footage from dawn to dark.

6.9. Internet Access and Remote Viewing

The system allows for remote viewing via web browser or mobile application.

6.9.1. Web Access (PC)

  1. Ensure the device IP and PC IP are on the same internet segment.
  2. Open an IE browser and enter the device's IP address (e.g., 192.168.1.9).
  3. Click "download plug-in" and follow the prompts to install it.
  4. For VMS video management, login to baike.xm030.cn and navigate to [Download Center] > [Software] > [PC Client] > [VMS].

6.9.2. Cloud Platform Access

For cloud service, visit www.xmeye.net. Complete registration and login. You can then add your device for remote management and viewing.

6.9.3. Mobile App Access

Download the "XMeye" app from your mobile app store (e.g., Google Play Store for Android, Apple App Store for iOS). Install the app and use the QR code scanning feature to add your device for mobile access.

  1. Click [Next] to enter the APP scan page.
  2. Scan the QR code displayed on the screen to download the monitoring software applications.
  3. Click [Next] to add the device by scanning the QR code within the app.

7. User Tips

  • For optimal performance, ensure your network connection is stable, especially for remote viewing.
  • Regularly check for firmware updates to enhance security and features.
  • When setting up motion detection, adjust sensitivity to minimize false alarms.
  • Consider using a dedicated power supply for the camera and DVR to prevent power fluctuations.
  • If experiencing connectivity issues, verify that the DVR's IP address and gateway match your router's segment, or enable DHCP.

8. Troubleshooting

  • No Video Signal:
    • Check all cable connections (video, power) between the camera and DVR.
    • Ensure the camera and DVR are powered on.
    • Verify the correct channel type is selected in the DVR settings (analog, hybrid, network).
  • Poor Image Quality:
    • Clean the camera lens.
    • Ensure adequate lighting in the surveillance area.
    • Check cable integrity; damaged cables can degrade signal quality.
  • Remote Viewing Issues:
    • Verify the DVR is connected to the internet.
    • Check network settings (IP address, gateway, DNS) on the DVR.
    • Ensure the "XMeye" app or web client is correctly configured and the device is added.
    • Confirm your router's internet connection is active.
  • Motion Detection Not Triggering:
    • Check motion detection area settings and sensitivity.
    • Ensure email alert settings are correctly configured, including recipient address and server details.
  • Password Forgotten:
    • Refer to the device's specific password reset procedure or contact technical support.

9. Warranty and Support

9.1. Warranty Information

The product comes with a one-year warranty period from the date of purchase.

During the warranty period, if any breakdown occurs due to a product defect, please contact your dealer or the after-sale service department.

Conditions for Non-Free Maintenance:

  • Absence of a valid warranty certificate, purchasing invoice, or receipt.
  • Breakdowns or damages caused by personal reasons, incorrect usage, or force majeure.
  • Breakdowns or damages caused by maintenance, refitting, or dismantling by unauthorized personnel not affiliated with our company.
  • Exceeding the specified warranty period.

Please retain your warranty card and proof of purchase for future service needs.

For further assistance, you may refer to the User manual (PDF) for additional details.

10. Frequently Asked Questions (FAQ)

Q: Does the camera have a microphone?
A: Based on the specifications, the camera itself does not have an audio output, implying no built-in microphone. However, the DVR system supports audio input, allowing for external microphone connection.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.