Alynic Bluetooth Wireless Selfie Stick Mini Tripod

Contents

Alynic Bluetooth Wireless Selfie Stick Mini Tripod User Manual

Model: Bluetooth Wireless Selfie Stick Mini Tripod

1. Product Overview

The Alynic Bluetooth Wireless Selfie Stick Mini Tripod is a versatile accessory designed for smartphones, functioning as both an extendable monopod (selfie stick) and a stable mini tripod. It features a detachable Bluetooth remote shutter for convenient photo and video capture.

The Alynic Selfie Stick Mini Tripod in both extended tripod mode with a phone and folded mode next to a phone, highlighting Bluetooth control.
Figure 1: Product Overview - Selfie Stick and Tripod Modes

This device is compatible with most smartphones, including iPhone, Samsung, and Xiaomi models.

2. Package Contents

  • Alynic Bluetooth Wireless Selfie Stick Mini Tripod
  • Detachable Bluetooth Remote Shutter
  • User Manual (this document)

3. Setup Instructions

3.1 Charging the Remote Shutter

The Bluetooth remote shutter typically uses a small button cell battery (e.g., CR2032). If the remote is not responding, replace the battery. No charging is required for this type of battery.

3.2 Bluetooth Pairing

  1. Ensure the remote shutter has a working battery.
  2. Turn on the remote shutter by pressing and holding the button until an indicator light (usually blue) starts flashing. This indicates it's in pairing mode.
  3. On your smartphone, go to Settings > Bluetooth.
  4. Enable Bluetooth and search for available devices.
  5. Select the device named "SelfieCom" or similar from the list.
  6. Once paired, the indicator light on the remote shutter will stop flashing and remain solid or turn off, depending on the model.
A hand holding the detachable Bluetooth remote shutter, with the selfie stick extended in tripod mode and a phone mounted.
Figure 2: Detachable Bluetooth Remote Shutter

3.3 Attaching Your Smartphone

  1. Locate the phone clamp at the top of the selfie stick.
  2. Gently pull apart the spring-loaded arms of the clamp.
  3. Carefully insert your smartphone into the clamp, ensuring it is securely held and balanced. The clamp is designed to hold smartphones horizontally or vertically.
  4. Adjust the angle of the phone holder as desired.
Close-up view of the selfie stick's tripod base and the phone clamp mechanism, illustrating its design.
Figure 3: Phone Clamp Mechanism

3.4 Deploying the Tripod

  1. Hold the handle of the selfie stick.
  2. Gently push the bottom part of the handle outwards to unfold the three tripod legs.
  3. Ensure the legs are fully extended and stable on a flat surface before placing your phone.

4. Operating Instructions

4.1 Using as a Selfie Stick (Monopod)

  1. Ensure the tripod legs are folded into the handle.
  2. Extend the telescopic rod to your desired length (up to 700mm).
  3. Hold the handle firmly and position your phone for the shot.
  4. Press the button on the Bluetooth remote shutter to capture photos or start/stop video recording.
Two individuals smiling and taking a group photo using the extended selfie stick, demonstrating its use for wider shots.
Figure 4: Using the Selfie Stick for Group Photos

4.2 Using as a Tripod

  1. Deploy the tripod legs as described in Section 3.4.
  2. Place the tripod on a stable, flat surface.
  3. Extend the telescopic rod to the desired height.
  4. Adjust the phone's angle using the rotating head.
  5. Use the Bluetooth remote shutter to take photos or videos without touching your phone, preventing camera shake.
The selfie stick fully extended as a tripod with a smartphone mounted, showing its stability.
Figure 5: Selfie Stick in Tripod Mode

4.3 Adjusting Angle and Rotation

The phone holder can be rotated 360 degrees and tilted to various angles to achieve the perfect shot. Loosen any locking knobs if present, adjust, and then tighten to secure the position.

5. Maintenance

  • Cleaning: Wipe the selfie stick and remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Storage: When not in use, fold the selfie stick to its compact size (190mm) and store it in a dry place away from direct sunlight and extreme temperatures.
  • Battery: If the remote shutter is not used for an extended period, consider removing the battery to prevent leakage.
  • Avoid Overloading: Do not exceed the recommended weight capacity for your smartphone in the clamp to prevent damage.

6. Troubleshooting

6.1 Remote Shutter Not Connecting

  • Ensure the remote shutter is turned on and its indicator light is flashing.
  • Check if Bluetooth is enabled on your smartphone.
  • Make sure the remote's battery is not depleted. Replace if necessary.
  • Try unpairing and re-pairing the device in your phone's Bluetooth settings.
  • Ensure no other Bluetooth devices are interfering with the connection.

6.2 Phone Not Fitting Securely

  • Ensure your phone is within the compatible size range for the clamp.
  • Remove any bulky phone cases that might prevent a secure fit.
  • Make sure the phone is centered in the clamp for optimal balance.

6.3 Tripod Instability

  • Ensure the tripod legs are fully extended and locked into position.
  • Place the tripod on a flat, stable surface.
  • Avoid extending the telescopic rod to its maximum length if the surface is uneven or windy, as this can reduce stability.

7. Specifications

Feature Specification
Brand Name Alynic
Max Extended Length 700 mm
Folded Length 190 mm
Communication Bluetooth
Support Remote Control Yes
Configured for (Adaption) Smartphones
Material Plastic
Package Yes
Product Weight (packaged) 0.128 kg
Package Dimensions (L x W x H) 22 x 5 x 3 cm
Origin Mainland China

8. User Tips

  • For optimal stability when using the tripod, ensure the legs are fully spread and the surface is level.
  • When extending the monopod, extend it gradually to find the best balance for your phone's weight.
  • Always double-check that your phone is securely clamped before releasing your grip.
  • To conserve remote battery life, turn off the remote shutter when not in use.
  • Experiment with different angles and heights to get creative shots.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to your purchase documentation or contact the seller directly.

For technical support or further inquiries, please contact the retailer or manufacturer's customer service.

An additional user manual in PDF format may be available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.