Introduction
Thank you for purchasing the IRALAN Ceiling Fan Light. Please read this manual carefully before use and operate the product in strict accordance with these instructions. This manual provides essential information for the safe and efficient assembly, installation, operation, and maintenance of your new ceiling fan light.
Safety Rules
Prior to installing your ceiling fan, make sure to carefully review all safety instructions in this document. Please retain this manual for future reference. If you encounter any uncertainties or face challenges during the installation process, please contact customer support.
- Prior to commencing the fan installation, switch off the circuit breaker in the fuse box to cut off power.
- Carefully review all instructions and safety guidelines before proceeding with the installation of your new fan.
- Ensure that all wiring adheres to national and local electrical codes. If you lack familiarity with wiring, it is advisable to seek assistance from a certified electrician.
- Avoid bending the blades during installation, while balancing them, or when cleaning the fan.
- Refrain from inserting foreign objects between the rotating fan blades.
- Confirm that the chosen installation site allows the fan blades to rotate freely without encountering any obstacles.
- To minimize the risk of electric shock, disconnect the electrical supply circuit before attaching the light kit.
- Following fan installation, verify that all mounting components are securely in place to prevent the fan from falling.
- Turn off the fan and wait until the blades come to a complete stop before conducting any maintenance or cleaning tasks.
Package Content
Please verify that all components are present and undamaged upon unboxing. If any parts are missing or damaged, please contact customer support.
- A. Ceiling fan light body *1
- B. Remote control *1
- C. Wood screws *1
- D. Expansion screws *4
- E. Screwdriver *1
Installation Tools
The following tools are required for assembly and installation:
| Tool | Description |
|---|---|
| Star-head Screwdriver | For tightening screws. |
| Wire-stripping Pliers | For preparing electrical wires. |
| Stepladder | For safe access to the ceiling. |
| Electrical Tape | For securing electrical connections. |
Specifications
Detailed specifications for the IRALAN Ceiling Fan Light:
| Feature | Specification |
|---|---|
| Product Name | Ceiling Fan Light |
| Model Number | BY-601-500-1 |
| Input Voltage | AC 85-265V, 50/60Hz |
| Light Source | LED |
| LED Output Power | 25-36W (Light), 40W (Total) |
| Motor Rated Power | <25W |
| Fan Wattage | 50W |
| Brightness | 5000 Lumen |
| Color Temperature | 3000K (Warm White), 4000K (Nature), 6500K (White) |
| Dimmable | Yes |
| Bulbs Included | Yes |
| Product Size (Diameter x Height) | 50cm x 14cm (16 inch blade size) |
| Package Size | 52cm x 52cm x 14cm |
| Weight | 3kg (Product), 3.364kg (Package) |
| Fan Wind Speed | 1 - 6 gears |
| Rotating Speed (RPM) | 555-856 r/min |
| Reversible Airflow | Yes |
| Fan Timing | 1H/2H |
| Control Method | Remote Control, APP Control |
| Valid Remote Distance | 8-20 meters |
| Remote Control Battery | No. 7 (AAA) * 2 |
| Installation Method | Self-Contained |
| Suitable Area | 10-20 M² |
| Certification | CCC, CE |
| Dual Memory Function | Wall Switch and Remote |
Setup
Follow these steps for proper installation of your ceiling fan light. It is recommended to have a second person assist during installation.
1. Initial Assembly
- Attach the motor to the main body of the fan.
- Secure the light ring to the fan body.
- Install the fan blades onto the motor.
2. Plate Installation
The circular hanging plate is pre-assembled on the top of the fan. Loosen the 4 side screws to disassemble it first.
For wooden ceiling:
Start by drilling a pilot hole in the ceiling using a power drill. Then attach the mounting plate using 4 wood screws.
For concrete ceiling:
Use a hammer drill and a suitable carbide drill bit to create a hole in the base material. After clearing out any debris, insert the 4 expansion screws and tighten them using a wrench.
3. Wiring Preparation
Lift the fan towards the ceiling to suspend it from the mounting bracket using the security cable loop and washer hook. This allows you to start wiring without holding the fan body.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you once you are set on the ladder.
4. Wiring
WARNING: Disconnect the electrical supply circuit before wiring to reduce the risk of electric shock.
- Put the receiving unit into the top of the fan body and fasten it with electrical tape to avoid movement.
- Make wire connections according to wire colors/labels and the diagram below.
5. Final Mounting
Once wire connections are completed, lift the fan body carefully and align the collar with the mounting bracket. Tabs on the ceiling plate should seat into the channel on the inside of the fan collar.
Rotate the fan so that the set screw holes on the fan body align with the set screw holes on the ceiling plate. Take care not to pinch or damage internal wires. Insert and firmly tighten two canopy screws from the screw pack.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you once you are set on the ladder.
Operating Instructions
Your IRALAN Ceiling Fan Light can be controlled via the included remote control or a dedicated mobile application.
Remote Control
This product uses 2.4G wireless digital remote control technology, offering one-to-one control, simple operation, and strong anti-interference ability.
Technical Parameters:
- Model: 2.4G AC fan light controller
- Wall switch sequence: full light/white light/yellow light
- Receiving method: RF2.4G
- Remote control distance: 8-20 meters
- Remote control battery: No. 7 (AAA) 1.5V X2
Remote Control Matching Code:
Turn on the power and press and hold the light pairing key (usually indicated by a Wi-Fi or signal icon) within 5 seconds of the light turning on. When you hear a beep or the light flashes three times, the code match is successful. If you need to match the code a second time, you need to wait 30 seconds before turning on the power and repeating the above operation.
CAUTION: The electronic switch is not an isolated product and needs to be operated by professional personnel during installation. The electronic switch is triggered by the remote control, and the wireless frequency of the remote control transmitter is 2.4GHz.
App Control
You can control your fan light using a mobile application. Scan the QR code below to download the app.
CAUTION: To connect to the mobile app, please use the wall switch to control the fan light. Do not use the remote control for initial app connection, otherwise it will not connect to the phone.
App Connection Guide (iPhone - Android similar):
- Scan the QR-Code to download the APP and register an account as per the instructions.
- Log in to the account, and click "+" to add the device. You can edit the device name, room, and choose the device type (such as fan light).
- Click on the 'enter' button within the app.
App Button Function Description:
- Code matching button: Click this button within 5 seconds of turning on the light. If the light source flashes or the buzzer sounds "di", the pairing code is successful. If pairing fails, repeat the operation.
- Timer: Choose a time to turn off the device regularly.
- Natural Wind: Activates a wind mode that simulates natural wind.
- Sleep Wind: Activates a gentle wind mode suitable for sleep.
- Reverse Direction (R): The fan will rotate in the reverse direction (Winter Mode).
- Change Wind Direction: Click to change the direction of the wind.
- Forward Direction (F): The fan will rotate forward (Summer Mode).
- Low Brightness (White & Yellow): White light and yellow light will light up at the same time, but the brightness is only 10% of the maximum brightness.
- Max Brightness (White & Yellow): White light and yellow light will light up at the same time, and the brightness is the maximum brightness.
- Yellow Light Only (Max Brightness): Only the yellow light will light up, and the brightness is the maximum brightness.
- White Light Only (Max Brightness): Only the white light will light up, and the brightness is the maximum brightness.
Maintenance
Here are some suggestions to help maintain your fan:
- Because of the fan's natural movement, some connections may become loose. Check the support connections, brackets, and blade attachment twice a year. Make sure they are secure.
- Clean your fan periodically to help maintain its new appearance over the year. Do not use water when cleaning. This could damage the motor, or possibly cause electrical shock.
- Use only a soft brush or lint-free cloth to avoid scratching the finish. Cleaning products may damage the finished surface.
- There is no need to oil your fan. The motor has permanently lubricated bearings.
- If installed in a coastal, humid environment, regular surface cleaning may be necessary to avoid deterioration or oxidizing effects of salt or other corrosive elements. A Damp Location rating is not an assurance of finish durability. Preventative measures should be taken depending on the environmental exposures your fan will undergo to preserve and protect the finish quality and appearance of your fan.
WARNING: Before servicing or cleaning your fan, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
Troubleshooting
Please read all installation instructions carefully. After reviewing the following tips, if you are unable to solve a problem, please contact customer service for additional assistance.
Fan makes humming noise
- Be sure you are using the control set supplied with your fan.
- Make sure all fittings are firmly secured. Loose parts will often cause vibrational noise or humming. Removal and re-attachment can sometimes remedy this resonant vibrational noise.
Fan not responding to remote control
- Check that all wire connections are secure and made as instructed.
- Verify that power is on and reaching the receiver by a voltmeter.
- Verify that controller batteries are installed with proper polarity as indicated inside the battery cover.
Fan jitter
- Make sure the mounting plate and hardware at the ceiling are secure and firmly fastened. If necessary, use the wood screws provided to further secure the outlet box to the joist.
- Carefully lower motor housing and verify that the mounting plate is secure to the outlet box, screws are tight.
Light does not work
- Check wire connections at ceiling and receiver.
- Confirm that LED wire leads and terminal block are properly connected to the LED board.
Fan makes repetitive ticking noise
- Check for obstructions in the rotor path.
- Make sure mounting hardware at the ceiling is secure.
- Make sure all other hardware and blade attachments are tight.
- Give fan adequate "Break in Period" of several hours to several days then repeat steps above.
User Tips
- Always check the package contents immediately upon arrival to ensure all parts are present and undamaged.
- Confirm the product's voltage compatibility (85-265V) with your local electrical supply before purchase and installation.
- Retain this user manual, especially for the app QR code and remote control pairing instructions, as these are crucial for setup and future reference.
Warranty & Support
This product is supported by a one-year warranty.
For after-sales support or any inquiries, please contact us via email: sxdsltd@163.com
A detailed user manual in PDF format is also available for download. You can view it here.