CYCLAMI RT01

Contents

CYCLAMI Bicycle Intelligent Radar Tail Light RT01 User Manual

Model: RT01 | Brand: CYCLAMI

1. Introduction

Congratulations on your purchase of the CYCLAMI RT01 Intelligent Radar Tail Light. This manual provides detailed instructions on the features, usage, and maintenance of your new device to ensure a safe and enjoyable cycling experience.

The RT01 is designed to enhance cycling safety with its advanced radar sensing technology, providing real-time warnings of approaching vehicles. It features high-brightness LEDs, multiple lighting modes, and a durable, waterproof design.

CYCLAMI RT01 Radar Tail Light with key features highlighted
CYCLAMI RT01 Radar Tail Light showcasing its features: MM Radar Wave, Precision Sensors, Large-angle radar (54°), 500 Meter Visible, Dual Bracket Mount, 1500MAH Battery, 60g Ultralight, TYPE-C Fast Charge.

2. Package Contents

Please check the package to ensure all items are present:

  • RT01 Radar Taillight
  • User Manual
  • Wrench
  • Saddle bracket (angle adjustable)
  • Seatpost Bracket (V-Bar Compatible)
  • TYPE-C USB Charging Cable
Contents of the RT01 package including the tail light, manual, wrench, saddle bracket, seatpost bracket, and USB cable.
Packaged items: RT01 Radar Taillight, Box, Manual, Wrench, Saddle bracket (angle adjustable), Seatpost Bracket (V-Bar Compatible), and TYPE-C USB cable.

3. Specifications

FeatureSpecification
ModelRT01
TypeBicycle Intelligent Radar Tail Light
LED20x2835 Ultra bright red light LED
Battery1500mAh Polymer Lithium Battery
Visible Distance500m
Radar Sensing Distance30m
Radar Angle54° Horizontal, 27° Vertical
Run Time (Light Modes)Bright: 4h, Breathing: 4.5h, Strobe: 5.5h, Slow Strobe: 13h, Warning Strobe: 11h, Climbing Snake: 36h, Double Snake: 36h
Charge PortType-C
Dimensions59 x 39 x 31mm
Net Weight~60g
Body MaterialABS Engineering Plastic
Waterproof LevelIPX6 (Note: Some documentation may refer to IP64, but IPX6 is the specified rating for water resistance.)
CertificationCE, FCC, RoHS
Radio Frequency24-24.25GHz (20mW limit)
Comparison table of RT01 specifications against other tail lights.
Parameter comparison table for RT01, highlighting its superior Lumen, Battery, Run time, Sensing distance, and Firing range compared to other models.

4. Setup and Installation

The RT01 offers dual bracket mounting options for versatility.

Diagram showing seatpost and saddle mounting options for the tail light.
Dual Bracket Mount: Seatpost Mounting Bracket (V-Bar compatible) and Saddle Mounting Bracket (adjustable light angle without straps).

4.1. Installing on the Seatpost

  1. Insert one end of the silicone strap into the flat hole of the base.
  2. Place the base against the seatpost.
  3. Wrap the silicone strap around the seatpost.
  4. Insert the holes on the silicone strap into the base card and bend the remaining silicone strap backwards.
  5. Align the protrusion of the lamp with the corresponding slot on the lamp holder and insert it.
  6. Rotate the lamp head 45 degrees to secure it.

4.2. Installing under the Seat Cushion (Saddle)

  1. Attach the saddle bracket to the underside of your bicycle saddle rails.
  2. Secure the bracket by tightening the screws with the provided wrench.
  3. Align the protrusion of the lamp with the corresponding slot on the lamp holder and insert it.
  4. Rotate the lamp head 45 degrees to secure it.
  5. After adjusting the position of the lamp holder, tighten the left and right screws.

4.3. Disassembly

To remove the lamp head, rotate it 45 degrees in the opposite direction of installation and pull it out.

5. Operating Instructions

Diagram showing the regular light button and radar mode button on the tail light.
Independent Switch: Regular Light Button (7 light modes) and Radar Mode Button (3 light modes).

5.1. Power On/Off

Long press either the Regular Light Button or the Radar Mode Button to turn the device on or off.

5.2. Regular Light Modes

The RT01 features 7 regular light modes. To cycle through them:

  • Click the Regular Light Button (marked with a lightbulb icon).
  • The light will turn green to indicate the mode change.
  • Modes cycle as follows: Bright → Strobe → Slow Strobe → Warning Strobe → Breathing → Climbing Snake → Double Snake.
  • To turn off the regular light, long press the Regular Light Button for 5 seconds.
Images showing various light modes: Bright, Breathing, Strobe, Slow Strobe, Warning Strobe, Climbing Snake, Double Snake.
Lighting Customization: Radar optional modes can be used with regular lights or separately to save power. Radar mode can select three kinds of burst flashing methods: Maximum brightness / Breathing light / High-frequency flashing, and the mode selected by the radar will be occupied.

5.3. Radar Mode Operation

The RT01 uses a millimeter wave radar to detect approaching vehicles.

  • Click the Radar Mode Button (marked with a radar icon) to activate radar sensing.
  • The light will turn blue to indicate radar mode is active.
  • Radar warning modes include: High frequency flicker, Rotary, Low frequency flicker.
  • To turn off the radar mode, long press the Radar Mode Button for 5 seconds.
Diagram illustrating the 54-degree monitoring scope and 500m visual distance of the radar tail light.
The RT01 detects and accurately warns vehicles behind you even when turning, with a monitoring scope of 54° and a visual distance of 500m.
Cyclists using the RT01 radar tail light, showing radar detection of vehicles.
Vehicle Grade Radar: FMCW modulated radar speed measurement algorithm provides real-time accurate detection of vehicles moving towards the tail light within 30 meters (Cars, motorcycles, electric vehicles, bicycles, etc.) and automatically filters out vehicles moving at the same speed or far away from you.
Comparison of Radar Taillight vs. Brake Taillight functionalities.
Radar Taillight vs. Brake Taillight: The radar taillight warns of quickly approaching vehicles, intelligently recognizes when no vehicle is approaching (no unnecessary blinking), and protects teammates' vision by only warning when they overtake.
Video demonstrating the CYCLAMI RT01 Radar Sensing Intelligent Tail Light in action, showing its visibility during the day, radar detection of vehicles, and various light modes.

5.4. Power Indicator

  • Blue light: Radar mode is active.
  • Green light: Battery capacity is 10% or more.
  • Red light flash: Battery capacity is less than 10%.

6. Maintenance

6.1. Charging

The RT01 features a Type-C fast charging port and a 1500mAh high-capacity battery.

Diagram showing the Type-C charging port and 1500mAh battery capacity.
High Capacity Battery: TYPE-C fast charging, up to 36 hours of continuous use on a single charge (longer if only radar mode is turned on).
  1. Open the waterproof charging plug at the bottom of the product.
  2. Insert the Type-C plug of the provided charging cable into the charging hole.
  3. Insert the USB plug of the charging cable into any 5V USB charger (not standard).

Charging Indicators:

  • Red breathing flash: Charging in progress, battery capacity less than 99%.
  • Green light: Charging complete, battery capacity 99% or more.

6.2. Waterproofing

The RT01 has an IPX6 waterproof rating, protecting it from heavy rain. Ensure the Type-C charging port's waterproof plug is securely closed after charging to maintain water resistance.

Image showing the tail light being sprayed with water, indicating its waterproof capability.
IPX6 Waterproof: Effectively protects the taillight in heavy rain and allows for riding in all weather conditions.

6.3. Storage

If the light is not being used for a long time, please fully charge the product before storing it. Recharge the light once every three months to maintain battery health.

6.4. Precautions

  • This product is designed for IPX6 protection. Do not immerse it in water or expose it to fire.
  • Avoid prolonged exposure to direct sunlight.
  • Do not attempt to disassemble the product yourself. Unauthorized disassembly may void the warranty and cause damage.
  • When operating this product, especially when adjusting settings, ensure you are in a safe location and not actively cycling to prevent accidents.

7. Troubleshooting

  • Radar not triggering: The radar is designed to detect moving objects (vehicles) approaching from behind at a speed greater than your own (by more than 10KM/hour). It intelligently filters out low-speed moving objects and does not trigger for pedestrians or simple hand waving. Ensure the radar mode is activated (blue light indicator).
  • No external alerts from radar: The RT01's radar function triggers visual warnings on the tail light itself (flashing light patterns) to alert the rider and approaching vehicles. It does not provide auditory alerts or connect to external devices for notifications.
  • Not connecting to bicycle computers: The RT01 does not support linking with ANT+ or Bluetooth bicycle computers (e.g., Garmin, iGPSPORT, Geoid). Its radar functionality is self-contained within the tail light.
Image indicating that the RT01 does not support linking with bicycle computers.
The RT01 does not support linking with bicycle computers via ANT+ or Bluetooth.

8. User Tips

  • Manual Operation: The light requires manual power on/off. It does not feature an automatic start/stop function based on motion.
  • Visibility: Users frequently praise the strong light intensity and various lighting effects, which significantly enhance visibility, especially at night.
  • Mounting: Both the saddle and seatpost mounts are reported to be sturdy and effective. Choose the mount that best suits your bicycle and riding style.
  • Radar Functionality: The radar provides visual warnings by changing the light pattern when vehicles approach. It is not designed to provide audio alerts or integrate with external cycling computers.

9. Warranty and Support

9.1. Warranty Regulations

The manufacturer provides a 3-year free warranty service for quality problems or defects in the product itself. The warranty period for the battery is 6 months.

Product defects or damages caused by improper use, unauthorized modification, or repair are not covered by the warranty.

9.2. Radio Transmission Equipment Compliance

This device is classified as Class H equipment for short-range radio transmission. It operates at a frequency of 24-24.25GHz with a transmission power limit of 20mW, intended for street use with a patch antenna. The micro emission power is uncontrollable and non-adjustable. Turning the product on/off also controls the radio transmitter.

Users are prohibited from:

  • Unauthorized changes to usage scenarios or conditions.
  • Expanding the transmission frequency range.
  • Increasing transmission power (including additional RF power amplifiers).
  • Changing the transmission antenna without authorization.
  • Causing harmful interference to other legitimate radio stations.

The device must withstand interference from industrial, scientific, and medical (ISM) application equipment that emits radiated radio frequency energy, or interference from other legitimate radio stations.

This product complies with CE, FCC, and RoHS certifications.

© 2024 CYCLAMI. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.