1. Introduction
This manual provides comprehensive instructions for setting up, operating, and troubleshooting your Xiaomi Router BE3600 2.5G WiFi 7. Please read this manual carefully before using the product to ensure proper operation and to maximize its performance.
2. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, contact customer support.

Diagram showing the contents of the Xiaomi Router BE3600 2.5G package.
- Xiaomi Router BE3600 2.5G Version
- Specification Manual
- Net Cable
- Power Adapter
3. Product Overview
3.1. Ports and Buttons

Front and rear view of the Xiaomi Router BE3600 2.5G, highlighting ports and buttons.
| No. | Name | Use |
|---|---|---|
| 1 | Power port | For connecting the power adapter |
| 2 | RESET button | Restore router factory settings (press and hold for 5 seconds) |
| 3 | 1G network port | A network port with a maximum rate of 1Gbps, can be used as a WAN or LAN port (automatic identification) |
| 4 | 2.5G network port | A network port with a maximum rate of 2.5Gbps, available as a WAN port or LAN port (automatic identification) |
| 5 | MESH button | Networking with a router that supports Xiaomi Mesh functionality |
3.2. Indicator Light Status Description
| Status | Description |
|---|---|
| Extinguish | Unconnected power |
| Steady orange | The system is starting up or the network is abnormal |
| Orange Breathing | Boot complete, system to be configured |
| Blinking orange | The Mesh is being connected to the main route or the system is being upgraded |
| Steady blue | Normal operation |
| Blue Breath | When a configurable Mi Mesh node device is found, blinks for 2 minutes without networking operation, then returns to steady on |
| Blinking blue | A lower-level node is being connected |
4. Setup Guide
4.1. Connect the Network Cable
1. Power on the router.
2. Connect any of the router's network ports to the wall socket or the LAN port of your Optical Network Terminal (ONT) / broadband modem. If an ONT/modem is not provided, connect the incoming network cable directly to any of the LAN ports on the back of the router.

Diagram illustrating how to connect the Xiaomi Router BE3600 2.5G to power and network.
4.2. Set Up Internet Access
1. Connect your mobile phone or computer to the router's Wi-Fi network. The Wi-Fi name is located on the label at the bottom of the router (no password required initially).
2. Open a web browser. The page should automatically jump to the internet access guide page. If it doesn't, manually enter miwifi.com in the browser's address bar.
3. Enter the account and password provided by your broadband operator. Click 'Next'. (This step may be skipped depending on your internet access method).
4. Set a new Wi-Fi password and a management password for the router. You can choose to use the Wi-Fi password as the management password.
Note: After Wi-Fi configuration, the Wi-Fi module will restart. Wi-Fi may be temporarily undetectable. Please search for Wi-Fi again after a brief period.
4.3. IPv6 Setting
1. Open a browser and enter miwifi.com. Input your management password to access the router management page.
2. Navigate to
