1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Fccemc 4pcs Car Chassis LED Rock Lights. Please read this manual thoroughly before installation and keep it for future reference.
These LED rock lights are designed to provide auxiliary lighting for various vehicles, including trucks, pickups, off-road vehicles, Jeeps, SUVs, ATVs, and UTVs, enhancing visibility and aesthetics.
2. Safety Information and Warnings
General Safety
- Install only on 12V DC vehicle electrical systems. Wrong voltage will cause burnout or fire.
- Observe polarity (+/-) strictly. Reverse connection will damage the product.
- Install with proper fuse protection to prevent overcurrent, short circuit, and fire risk.
- Installation by a qualified electrician is recommended. Improper installation may cause vehicle failure or accident.
- This product is not E-marked / not for road legal use; use on public roads at your own risk.
- Keep out of reach of children.
- Do not connect to 24V or household power.
- Disconnect the power during installation to avoid short circuits.
3. Package Contents
Verify that all items are present and in good condition. If any items are missing or damaged, contact customer support.
- 4 x Fccemc Car Chassis LED Rock Lights
- Mounting hardware (screws, nuts, etc.)
- Wiring (attached to lights)
Image: Contents typically include four LED rock lights and associated wiring/mounting hardware.
4. Specifications
| Feature | Specification |
|---|---|
| Product Type | Work Light (LED Rock Light) |
| Color Temperature | 6500K (White light, other colors available via control) |
| Operating Voltage | 12V DC |
| Dimensions (approx.) | 7cm (2.755in) Length x 3.5cm (1.377in) Width x 1.5cm (0.590in) Height |
| Wire Length | 46cm (18.110in) |
| Compliance | EU RoHS, REACH, LVD 2014/35/EU, EMC 2014/30/EU |
Image: Detailed dimensions and basic wiring diagram for the LED rock light.
5. Setup and Installation
Before beginning installation, ensure the vehicle's power is disconnected to prevent short circuits.
Wiring Instructions:
- Identify Wires: Each LED rock light has two wires: a red wire and a white wire.
- Connect Positive: Connect the red wire to the positive pole (+) of your 12V DC vehicle electrical system.
- Connect Negative: Connect the white wire to the negative electrode (-) of your 12V DC vehicle electrical system.
- Fuse Protection: Ensure proper fuse protection is in place for the circuit to prevent overcurrent and short circuits.
- Voltage Check: Verify that your vehicle's power supply is 12V DC. Do not connect to 24V or household power.
Mounting Instructions:
- Choose Location: Select a suitable location on your vehicle's chassis or undercarriage for mounting the lights. Consider areas that will provide optimal illumination and are protected from direct impact.
- Prepare Surface: Clean and thoroughly dry the installation surface before attaching the light strip. This ensures proper adhesion and prevents moisture-related issues.
- Secure Lights: Use the provided mounting hardware to securely attach each LED rock light to the chosen surface. Ensure they are firmly fixed to withstand vehicle movement and vibrations.
Image: Wiring diagram illustrating connection of red wire to positive (+) and white wire to negative (-).
Image: Visual comparison of a vehicle before and after rock light installation, highlighting the effect.
6. Operation
Once properly installed and wired, the Fccemc LED Rock Lights will illuminate when power is supplied to their circuit. The specific method of controlling the lights (e.g., on/off switch, color change) depends on how they are integrated into your vehicle's electrical system and any additional control modules you may have installed.
The lights are capable of displaying various colors, including blue, light blue, red, purple, and white, as demonstrated in the product video and images.
Video: Demonstration of the LED rock light changing colors (blue, white, red).
Image: Examples of various colors the LED rock lights can produce.
7. Maintenance
- Cleaning: Periodically clean the surface of the LED lights with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners or solvents that could damage the lens or housing.
- Inspection: Regularly inspect the wiring and mounting points for any signs of wear, corrosion, or looseness. Tighten any loose connections and replace damaged wiring as needed.
- Water Exposure: While designed for outdoor use, avoid prolonged submersion or high-pressure water jets directly on the lights to ensure longevity.
8. Troubleshooting
Lights Not Turning On:
- Check Power Connection: Ensure the red wire is securely connected to the positive (+) terminal and the white wire to the negative (-) terminal. Verify that the vehicle's power supply is active.
- Verify Voltage: Confirm that the power supply is 12V DC. Incorrect voltage (e.g., 24V) can prevent operation or cause damage.
- Inspect Fuse: Check the fuse in the circuit. A blown fuse will cut power to the lights. Replace if necessary.
- Wiring Integrity: Examine all wiring for cuts, pinches, or loose connections.
Lights Flickering or Dim:
- Loose Connections: Check all electrical connections for tightness.
- Insufficient Power: Ensure the vehicle's electrical system can provide adequate power to all installed lights.
- Corrosion: Inspect terminals and connections for corrosion, which can impede electrical flow. Clean if found.
Inconsistent Color/Functionality:
- If using a separate control module for color changes, refer to that module's instructions for troubleshooting.
9. User Tips
- Quality Check: Upon receipt, inspect the product for any damage. A thorough check is advisable to ensure all components are intact.
- Professional Installation: While DIY is possible, professional installation is recommended for optimal safety and stability, especially for complex vehicle electrical systems.
- Material Quality: Users have praised the excellent material quality and workmanship, indicating a durable product.
- Lighting Performance: The lights offer very good lighting, enhancing both visibility and the aesthetic appeal of the vehicle.
10. Frequently Asked Questions (FAQ)
Q: Is this a single color light or does it have different colors?
A: The product is capable of displaying different colors. The video and images show it can produce blue, white, red, purple, and light blue light.
Q: Is the product compatible with 12V or 24V systems?
A: This product is designed for 12V DC vehicle electrical systems only. Connecting it to 24V or household power will cause damage or fire.
11. Manufacturer Information and Support
Manufacturer:
Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
Tel: 86-13535102100
E-mail: zj634216187@163.com
EU Authorized Representative:
Apex CE Specialists GmbH
Address: Grafenberger Allee 277, 40237 Dusseldorf, DE
E-mail: Info@apex-ce.com
Tel: +49 21312066043
For further assistance or inquiries, please contact the manufacturer or the EU authorized representative.
A user manual in PDF format is also available for download: User manual (PDF)