Introduction
Thank you for choosing the KINHANK Super Console X 2T Gaming HDD. This portable hard drive is designed to transform your PC or Mac into a powerful retro gaming console, pre-loaded with the Batocera 39 game system and over 120,000 games. This manual provides essential information for setup, operation, and maintenance to ensure you have the best gaming experience.
Product Specifications
| Parameter | Detail |
|---|---|
| Product Name | Portable Game Hard Drive |
| Brand | KINHANK |
| Model | X2T |
| Capacity | 2TB |
| Size | 2.5 inches |
| Interface Type | USB 3.0 (SATA 3.0 main control chip) |
| Operating System | Batocera 39 |
| Supported Host Systems | Windows 7/8/10/11, Mac OS, Linux (X86 hardware, 32bit or 64bit) |
| Games Included | 120,000+ games, 80+ game collections and emulators |
| Weight | 200g |
Setup Guide
The KINHANK Super Console X 2T is designed for plug-and-play convenience, requiring no additional drivers.
1. Physical Installation
- Gently press and slide the upper cover of the HDD enclosure.
- Insert the hard disk into the enclosure.
- Close the back cover securely.
- Connect the portable hard drive to a USB port on your PC or Mac. A USB 3.0 port is recommended for optimal performance. Ensure your computer is powered off before connecting.
2. Booting into Batocera
To boot into the Batocera game system, you need to access your computer's BIOS/UEFI settings and select the KINHANK HDD as the boot device.
- With the KINHANK HDD connected and your computer powered off, press the power button to turn on your computer.
- Immediately and repeatedly tap the ESC or Delete key on your keyboard to enter the BIOS/UEFI setup utility. (For Mac users, hold down the Option key after pressing the power button and select the portable hard drive from the boot options.)
- Once in the BIOS/UEFI interface, navigate to the Boot page or Boot Options section.
- Locate the Boot Option Priorities and set the external hard drive (e.g., "UEFI OS [Seagate Slim 0302]" or similar, depending on your HDD model) as Boot Option #1.
- Go to the Save & Exit section.
- Choose Save Changes and Reset, then press Enter on your keyboard. Your computer will restart and boot into the Batocera system.
Note: The BIOS interface and options may vary depending on your device's manufacturer. If you encounter difficulties, refer to your computer's manual or contact support.
After restarting, your PC will boot into Batocera for once. If you'd like Batocera to be the default booting option, repeat the BIOS steps and ensure the portable hard drive remains set as Boot Option #1.
Operating Instructions
Navigating Batocera
Once Batocera has loaded, you can navigate the system using a connected game controller or keyboard. The interface is intuitive, allowing you to browse through game collections and emulators.
Managing Games and Storage
The hard drive is pre-installed with the Batocera 39 game system. You can manage its contents directly:
- Checking Capacity: To view the gaming partition and its capacity, connect the hard drive to your computer while it's running its native operating system (Windows, Mac, or Linux). The gaming partition will appear in 'My Computer' (Windows) or Finder (Mac).
- Adding/Deleting Games: You can directly add or delete games from the gaming partition. Ensure you understand the file structure of Batocera to avoid corrupting the system. The 'roms' folder is where game files are typically stored.
Maintenance
- Safe Removal: Always safely eject the hard drive from your computer's operating system before disconnecting it to prevent data corruption.
- Physical Care: Keep the hard drive in a cool, dry place, away from direct sunlight, extreme temperatures, and strong magnetic fields. Avoid dropping or subjecting it to physical shocks.
- Software Updates: Periodically check the official Batocera website for system updates to ensure optimal performance and access to the latest features.
Troubleshooting
Compatibility Notice
This hard drive is designed to work exclusively with X86 hardware (32-bit or 64-bit systems). It will not function with ARM-based devices, such as Windows Surface series or Mac computers equipped with PowerPC or M1 CPUs.
Common Issues & Solutions
- Cannot boot into Batocera: Ensure the hard drive is properly connected via a USB 3.0 port. Verify that you have correctly set the external hard drive as the primary boot option in your computer's BIOS/UEFI settings.
- BIOS/UEFI interface looks different: Manufacturers use various BIOS/UEFI systems. The exact steps to enter and navigate the BIOS may differ. Consult your computer's manual for specific instructions or search online for your computer model's BIOS access key.
- Games not loading or performing poorly: Ensure your computer meets the minimum system requirements for running the emulators and games. Check for any available Batocera system updates.
User Tips
- Explore the Game Library: The Batocera system includes a vast collection of games. Take time to explore the different emulators and game categories to discover new favorites.
- Controller Setup: For the best experience, ensure your game controllers are properly configured within Batocera. Most common USB controllers are plug-and-play, but some may require manual mapping in the system settings.
- Game Compatibility: While the drive supports many systems, not all games for every system may be included or function perfectly. The system is primarily designed for PC/Mac compatibility, not PlayStation 3 or 4 consoles.
Warranty and Support
For any technical difficulties, questions, or support needs, please do not hesitate to contact our friendly sales staff. We are here to assist you.
Email: kinhank003@gmail.com
You can also find useful tutorial videos on our YouTube channel. For quick access, you may scan the QR code below:
A detailed user manual in PDF format is also available for download: Download User Manual (PDF)