1. Introduction
This manual provides detailed instructions for the DIXSG 433MHz Cloning Duplicator Key Fob Remote Control. This universal remote is designed to clone fixed and learning code remote controls for various applications, including garage doors and gate openers. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Safety Information
- WARNING: Please be aware of potential fire risks associated with electronic devices.
- Strictly follow the instruction manual for proper charging and storage of the device.
- Do not expose the remote control to extreme temperatures, direct sunlight, or moisture.
- Keep out of reach of children.
3. Product Overview
The DIXSG Cloning Duplicator Key Fob is a versatile remote control designed for ease of use and durability. It features a compact design with a metal keychain attachment for portability.
Key Features:
- 433MHz operating frequency.
- Ability to clone fixed and learning code remote controls.
- Durable and environmentally friendly materials.
- Compact design with keychain for easy carrying.
- Universal compatibility for various uses (e.g., garage doors, gate openers).
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | DIXSG |
| Model Number | Cloning Duplicator Key Fob A Distance Remote Control 433MHZ |
| Frequency | 433 MHz |
| Channel | 1 |
| Wireless Communication | RF |
| Use | Universal |
| Support APP | No |
| Origin | Mainland China |
| Certification | NONE |
| Package | Yes |
| Length | 55mm (2.16 inches) |
| Weight | 0.028 kg |
5. Setup and Pairing
Follow these steps to clear existing codes and copy new codes to your remote control.
5.1. Clear Code
- Press and hold buttons A and B (or the top two buttons) on the remote control simultaneously.
- The LED indicator will flash rapidly three times.
- While still holding button A, release button B.
- Press button B three times consecutively. The LED will flash rapidly again.
- Release both buttons. The code clearing process is now complete.
To verify that the code has been cleared, press any button on the remote. If the LED does not light up, the clearing process was successful.
5.2. Copy Code (Face-to-Face Cloning)
- Place your original remote control and the new cloning remote control side-by-side or back-to-back. Ensure they are as close as possible.
- Press and hold the desired button on your original remote control.
- Simultaneously, press and hold the corresponding button on the new cloning remote control.
- The LED on the new remote will first flash rapidly twice, then slowly three times, and finally remain steadily lit. This indicates successful copying.
- Release both buttons.
- Repeat this procedure for any other buttons you wish to copy.
Video 1: Demonstration of remote control code clearing and copying.
6. Operation
After successfully cloning the desired codes, your new remote control is ready for use. Simply press the corresponding button on the remote to activate the linked device (e.g., open/close a garage door, arm/disarm an alarm system).
7. Maintenance
- Keep the remote control clean and dry. Wipe with a soft, damp cloth if necessary.
- Avoid dropping the remote control or subjecting it to strong impacts.
- If the remote control's range decreases or the LED indicator becomes dim, the battery may need replacement. Refer to the product's internal design for battery access.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote does not work after cloning. | Code not cleared properly, or cloning failed. | Repeat the "Clear Code" and "Copy Code" procedures carefully. Ensure the original remote is transmitting a strong signal. |
| Short operating range. | Low battery, or interference. | Replace the battery. Ensure no strong radio interference sources are nearby. |
| LED does not light up. | Battery is dead or incorrectly installed. | Check battery installation or replace with a new battery. |
9. User Tips
- For best cloning results, ensure both remotes have fresh batteries.
- Some rolling code remotes may require multiple attempts or a specific learning mode on the receiver unit in addition to cloning. Consult your original device's manual if cloning is difficult.
- Keep the remote control away from strong magnetic fields or other radio frequency devices to prevent interference.
10. Disposal Information
This product contains a lithium-ion battery. For safe disposal, please check your local authority's website for information on battery recycling and disposal requirements. Dispose of the battery and the device in accordance with all applicable legal requirements to protect the environment.
11. Compliance and Support
CE Certification
This product complies with relevant European Union directives and regulations, as indicated by the CE mark.
MJCM SARL
78 avenue des Champs-Élysées Bureau 326,
mjcm190928@gmail.com
+33 0767213611
Warranty and Technical Support
For warranty information or technical assistance, please contact your retailer or the manufacturer directly using the provided contact details.