GMAIPOP G900 4K+1080P

Contents

GMAIPOP G900 4K+1080P Dual Dash Cam User Manual

Model: G900 4K+1080P

1. Important Tips & Safety Instructions

Please read and understand all warnings and safety instructions before operating your GMAIPOP G900 Dash Cam.

SD Card Insertion

The SD card can only be inserted from one direction. Before inserting, please ensure the direction is correct as shown in the figure below. Push the card gently until it clicks into place.

Diagram showing correct SD card insertion direction into the dash cam.
Figure: Correct SD Card Insertion

Hardwired Kit Requirement

Time Lapse Video Mode and 24H Park Monitor features are triggered only when the Hardwired Kit is connected. Ensure you have the appropriate kit for these functions.

Diagram showing G-Sensor, Loop Recording, and a hardwire kit for 24 Hours Parking Monitor.
Figure: 24 Hours Parking Monitor with Hardwire Kit

Battery & Charger

  • The dash cam's built-in battery (200mAh) is for maintaining and saving settings only.
  • It must be connected to the car charger or USB to receive constant power. If power is interrupted, the unit will shut down.
  • Always use the original car charger provided to avoid faults or incompatibility.

Cautions for High Temperature

  • Do not leave this product where the temperature may exceed 70°C (160°F) for an extended period.
  • When using a sunshade, do not place the dash cam between the windshield and sunshade, as this may cause damage from heat buildup.

2. Box Contents

The package includes the following items:

  • Dash Cam Main Device (GMAIPOP G900)
  • Suction Bracket
  • 3M Sticky Mount
  • USB-C Car Charger (Input: 12-24V, Output: 5V/2A)
  • 1080P External Camera
  • 19.7ft connection cable for external camera
  • Accessories Bag (Cable Hiding Clip, Electrostatic film, Install kit, Replacement adhesive, Wet & Dry Wipes)
  • User Manual

Image showing the dash cam, rear camera, car charger, rear pull line, adhesive mount, and suction mount.
Figure: Included Accessories

3. Setup & Installation

3.1 Dash Cam Overview & Buttons

Familiarize yourself with the dash cam's ports and buttons:

Button/PortFunction
M/Lock ButtonShort press to Enter Menu. Short press during recording to Lock Video Files. Long press for 2-3s to enter File Management.
Up ButtonShort press to switch front/rear camera display. Short press to take a photo during recording.
Down ButtonShort press to Mute Audio Recording. Long press to turn On/Off WiFi.
OK ButtonShort press to Start/Stop Recording. Short press to Play/Pause video in Playback. Short press to Enter/Save settings in Menu.
Power ButtonLong press to turn On/Off the camera. Short press to turn On/Off camera screen.
Charing Light (Red)On when charging, off when fully charged.
Recording Light (Blue)Flashes when recording, stops flashing when recording stops.
Rear Camera PortConnects the external rear camera.
Mount InterfaceConnects the dash cam to the suction or sticky mount.
Type-C Power PortPower input for the dash cam.
TF Card SlotSlot for Micro SD/TF card.
Reset ButtonResets the device.
MIC (Microphone)Records audio.

3.2 Installing the Front Camera

Step 1: Install Electrostatic Film

  1. Clean the windshield glass thoroughly using the provided wet and dry wipes. This is crucial for proper adhesion.
  2. Peel off the cover marked "1" in Red from the electrostatic film.
  3. Carefully apply the electrostatic film to the cleaned windshield.
  4. Once the film is installed, peel off the other cover marked "2" in Green.

Step 2: Install the Bracket

Choose either the Suction Bracket or the 3M Sticky Bracket from the box.

Suction Bracket Installation:
  1. Insert the suction bracket into the dash cam's mount interface.
  2. Ensure the film is moved into the suction cup.
  3. Attach the suction cup to the electrostatic film on the windshield. Press and hold it tightly towards the windshield to remove any air.
  4. While pressing, turn the LOCKING Knob CLOCKWISE to secure it in place.
3M Sticky Bracket Installation:
  1. Insert the sticky bracket into the dash cam's mount interface.
  2. Remove the sticky cover from the 3M adhesive.
  3. Install and press the sticky bracket firmly onto the electrostatic film on the windshield.

Important Note: Do not remove or take off the 3M sticky bracket after installation.

Step 3: Adjust the Dash Cam's Recording Angle

  • Loosen the screw on the mount to adjust the angle.
  • Rotate the dash cam 360° to adjust the recording direction as needed.
  • Ensure the suction bracket is locked tightly to prevent it from dropping during video recording.

3.3 Connecting the Car Charger & Wiring

Connect the car charger to the camera's USB port and route the cable according to the diagrams below. Use the original car charger to avoid incompatibility issues.

Diagram showing two wiring methods for the dash cam power cable.
Figure: Wiring Methods A and B

Cable Routing Steps:

  1. Hide the cable into the top panel of the car.
  2. Gently break the side panel and insert the cable. Be careful if there is an airbag present.
  3. Insert the cable along the door's sealing tape.
  4. Connect the car charger to the cigarette lighter.

Important Note: If your vehicle has side curtain airbags, be very careful when running cables along your windows. Do not run cables past any airbags to prevent interference with deployment.

3.4 Installing the External Rear Camera

The external small camera can be installed in the rear windshield glass to view the back of the car. Use the longer 19.7ft connection cable provided.

Diagram showing wide angle recording from front (170 degrees) and rear (160 degrees) cameras.
Figure: Wide Angle Recording with Front and Rear Cameras

Step 1: Choose Position & Clean

Choose a suitable position on the rear windshield glass and clean it thoroughly.

Step 2: Install Electrostatic Film

Install the electrostatic film on the cleaned position.

Step 3: Attach Rear Camera

Remove the sticky cover from the rear camera and attach it firmly to the electrostatic film.

Important Note: If the external image is displayed opposite or upside down, please flip it in the menu settings or re-install the external camera.

Step 4: Wire the External Camera Cable

Route the external camera's cable from the rear camera to the dash cam. Ensure the two arrows on the cable connectors are aligned when connecting.

4. Operating Instructions

4.1 Power On (Start Recording)

  • When the car is powered on, the dash cam will automatically start recording. The recording icon (red dot) will flash.
  • To manually start/stop recording, short press the OK Button.

4.2 Power Off (Stop Recording)

  • When the car is turned off, the dash cam will automatically stop recording and power off.
  • Some car cigarette lighters may have a delay in powering off. In such cases, the dash cam will also delay its power off automatically.
  • To manually stop recording, short press the OK Button.

4.3 Settings Menu

To access the settings menu, long press the M/Lock Button. Use the Up and Down Buttons to navigate and the OK Button to confirm. Short press the M/Lock Button to exit the menu.

Setting NameOptionsInstruction
Resolution4K+1080P, 2K+1080P, 1080P+1080PChoose your preferred video resolution. Higher resolutions will consume more storage space.
Loop Recording1MIN (Default), 3MIN, 5MINSet the duration for loop recording. Videos are saved in increments.
LanguageEnglish (Default), Spanish, etc.Select the display language for the dash cam.
G-SensorOff (Default), Low, Medium, HighAdjust the G-Sensor's sensitivity level.
Parking MonitorOff (Default), OnTurn on/off the Parking Monitor feature.
Time-Lapse RecordingOff (Default), 1fps, 2fps, 5fpsSets the frame rate for time-lapse video. Requires hardwired kit.
Time-Lapse Recording DurationOff (Default), 8 hours, 16 hours, 24 hoursSets the duration for time-lapse recording.
WiFi SettingOff (Default), OnTurn on the G900's WiFi to connect with the app.
Screen Auto SleepOff (Default), OnAutomatically turns off the display screen after a set time. Press any button to turn it back on.
Screen Brightness120, 100, 80, 60...Adjusts the screen brightness.
Audio RecordingOff, On (Default)Turn on/off audio recording.
Button SoundOff, On (Default)Turn on/off button sounds.
Frequency60Hz/50HzSets the recording frequency.
Auto Power OffOff (Default), 1min/3min/5minSets the time after which the dash cam will automatically turn off if no operation or recording is active.
Time-SettingSet the date and time of the dash cam.
FormatFormats the SD card. Recommended regularly.
Restore SettingsRestores all settings to default.

4.4 WiFi Connection & App Usage

The GMAIPOP G900 features built-in WiFi for easy connection to your smartphone via a dedicated app. This allows you to download videos and manage settings wirelessly.

Image showing a hand holding a smartphone with the dash cam app open, and social media icons.
Figure: WiFi Connect & Free App

Step 1: Download the App

Search for the free app "Viidure" in Google Play Store (for Android) or Apple App Store (for iOS). Alternatively, scan the QR code below:

QR codes for downloading the Viidure app from iOS App Store and Android Google Play.
Figure: App Download QR Codes

Step 2: Turn on Dash Cam WiFi

There are two methods to turn on the dash cam's WiFi:

  1. Method 1 (Quick Access): Stop any ongoing recording by long pressing the OK Button. Then, long press the Down Button to turn on WiFi.
  2. Method 2 (Via Settings): Long press the M/Lock Button to enter the menu. Navigate to "WiFi Setting" using the Up/Down Buttons and turn it "On" using the OK Button.

Step 3: Connect Phone to Dash Cam WiFi

  1. On your mobile phone, go to WiFi settings.
  2. Search for the WiFi network named "G900-******" (the exact name will be displayed on the dash cam screen when WiFi is on).
  3. Enter the password: 12345678 to connect.

Important Note: Ensure your phone's WLAN is turned on, not Bluetooth, to connect to the dash cam's WiFi. The dash cam's WiFi is for direct phone connection only, not for internet access.

Step 4: Operate the App "Viidure"

Once connected, open the "Viidure" app. You can:

  • View live footage from the front and rear cameras.
  • Switch between front and external camera views.
  • Start/Stop recording.
  • Take photos.
  • Access camera files (recorded videos and photos).
  • Download videos from the camera to your phone.
  • Adjust general camera settings.

Important Note: When the WiFi is connected and the app is in use, you cannot operate the G900 dash cam using its physical buttons.

4.5 Playback Recorded Videos

You can playback recorded videos directly on the dash cam or via the mobile phone app.

Method A: Playback on Dash Cam

  1. Long press the M/Lock Button to enter the file management.
  2. Use the Up Button to scroll to previous videos and the Down Button to scroll to next videos.
  3. Press the OK Button to confirm and play the selected video.
  4. Press the M/Lock Button to exit playback.

Method B: Playback on Mobile Phone

  1. Ensure your phone is connected to the dash cam's WiFi (refer to section 4.4).
  2. Open the "Viidure" app.
  3. Navigate to the "Camera File" section.
  4. Select the desired video file.
  5. Before playback, you must download the video to your phone.

5. Important Functions

5.1 G-Sensor & Loop Recording

The G-Sensor is a 3-axis impact gravitational sensor that detects physical and gravitational forces. When a significant shock or crash is detected, the current video file will be locked and protected from being overwritten by the loop recording function.

Loop Recording allows the camera to continuously record. When the memory card is full, it automatically deletes the oldest unlocked video files to make space for new recordings. Video files are split into appropriate lengths based on your settings (1, 3, or 5 minutes).

5.2 Time-Lapse Video

Time-Lapse Video mode captures specific images per second at a much lower rate, creating a condensed video of a longer period. This feature is an auto function that records normal videos when the car engine is started. When the engine is off, it stops continuous recording and switches to 1fps time-lapse recording automatically.

Important Note: Time-Lapse recording is triggered ONLY by the Hardwire Kit. If only the car charger is used, the time-lapse video will NOT be triggered.

6. Maintenance

  • SD Card Formatting: It is recommended to format the SD card regularly, especially if the G-sensor is active, to prevent issues with full storage or missed important files.
  • Cleaning: Keep the windshield clean where the dash cam and external camera are mounted to ensure proper adhesion and prevent mounts from dropping.

7. Troubleshooting (FAQ)

SD Card Issues

  • Why can't the memory card be read or shows "SD card error"?
    1. Format the SD card manually.
    2. Reset the dash cam by pushing the reset button.
    3. If problems persist, contact customer support.
  • Why is the SD card full?

    Many locked files (triggered by G-sensor events) cannot be overwritten by loop recording. Format the SD card to delete these locked files.

Suction Bracket Issues

  • Why does the suction bracket keep dropping?
    1. Clean the windshield and remove any suciton film residue.
    2. Ensure the suction cup is rotated to the locked position tightly.
    3. The suction bracket is made of soft silicone and may degrade over time. If it becomes hard and drops, contact customer support for a replacement.

Dash Cam Operation

  • How to switch the display window between front cam & Rear Cam?

    Short press the Up Button to switch the front/rear camera display.

  • Why does the dash cam keep turning on and off?
    • Check the car charger connection. Sometimes interference from the cigarette lighter can disturb the power.
    • Turn off the Parking Monitor. If it detects shake, the dash cam might auto-start.
    • Format the SD card. If it's full of locked videos, the loop recording function cannot overwrite them, causing power cycling.

    If the problem is not solved, please contact customer support.

Time-Lapse Video Issues

  • Why does the Time-lapse video need to work with a Hardwire Kit?

    The time-lapse video feature requires a constant power supply from the car battery. A hardwire kit is necessary to connect directly to the car battery for this function.

8. Specifications

FeatureSpecification
Brand NameGMAIPOP
Item TypeCar DVR
Camera Resolution3840x2160 (4K)
Number Of Lenses2 (Front & Rear)
Imaging SensorSony IMX335
Pixels500Mega
View Angle170° (Front), 160° (Rear)
ApertureF2.0
Display Size3"-5" IPS Screen
Built-in ScreenYes
Touch ScreenNo
Screen Ratio16:9
Video CodeH.264
Video FormatAVI, MP4
Frames Per Second30 (Max Video Frame Rate: 60)
Max External Memory256G
Memory Card Required Reading SpeedClass 10
Power SourceCorded Electric
BatteryBuilt-in
Cable Length6m (Rear pull line)
InterfaceAV-In, SD/MMC, Wi-Fi, Micro SD/TF
Special FeaturesG-Sensor, Motion Detection, SD/MMC Card, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi Function, Parking Monitor, NightShot Function, Rear Camera, Loop-Cycle Recording Feature, Audio Recorded
OSD LanguageChinese (Simplified), Chinese (Traditional), English, French, German, Italian, Japanese, Korean, Russian, Spanish
Working Temperature-20℃ to 70℃
CertificationCE, FCC

9. Warranty & Support

Your GMAIPOP G900 Dash Cam comes with a 12-month product warranty. For any issues or support, please refer to the contact information provided in your product packaging or the user manual PDF.

A detailed user manual in PDF format is available for download. You can reference it for further instructions and diagrams.

User Manual (PDF): For a comprehensive guide, please refer to the official PDF user manual. (Link not embedded as per instructions)

10. User Tips

  • WiFi Functionality: The dash cam's WiFi is exclusively for connecting to your smartphone via the app to view and download videos. It does not provide internet access.
  • SD Card Maintenance: Regularly format your SD card, especially if the G-sensor is enabled, to prevent it from filling up with locked event files and ensure continuous recording.
  • Time-Lapse & Parking Monitor: To utilize the Time-Lapse Video Mode and 24H Park Monitor features, ensure your dash cam is connected using a hardwired kit for a constant power supply.
  • Clear Installation: Always ensure your windshield is thoroughly cleaned before installing the electrostatic film and mounts for optimal adhesion and stability.

11. Product Video

Watch this video for an unboxing, installation guide, and demonstration of the app's features.

Video: Unboxing, Installation, and App Demonstration

© 2024 GMAIPOP. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.