REDRAGON M612 PRO

Contents

Redragon M612 PRO BT & 2.4RGB Gaming Mouse User Manual

Model: M612 PRO (M612RGB-PRO)

Introduction

Thank you for choosing the Redragon M612 PRO BT & 2.4RGB Gaming Mouse. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new gaming mouse. Please read this manual carefully to ensure optimal performance and longevity of your device.

Redragon M612 PRO gaming mouse with RGB lighting and USB dongle

Redragon M612 PRO gaming mouse with RGB lighting and USB dongle.

Setup Instructions

The Redragon M612 PRO offers three connection modes: 2.4G Wireless, Bluetooth, and Wired.

1. Initial Installation (2.4G Wireless Mode)

  1. Locate the USB receiver (dongle) for the mouse. It is usually stored in a compartment on the underside of the mouse.
  2. Plug the USB receiver into an available USB port on your computer.
  3. Turn on the mouse by sliding the mode switch on the underside to the '2.4G' position.
  4. Your computer should automatically detect and install the necessary drivers.
Diagram illustrating the 3-mode connection technology: 2.4G wireless, wired, and Bluetooth.

The mouse supports 3-mode connection: 2.4G Wireless, Wired, and Bluetooth.

2. Charging Your Mouse

The mouse is equipped with a rechargeable battery. To charge:

  1. When the battery is low, the battery indicator LED will flash red.
  2. Connect the mouse to your computer using the provided USB cable.
  3. The LED will turn green when the mouse is fully charged.
  4. For optimal performance, you can continue to use the mouse while it is charging.
A person holding the braided USB charging/data cable.

The mouse charges via the included USB cable.

3. Wake Up Your Wireless Mouse

If the mouse enters sleep mode to conserve battery, simply move the mouse or click any button to wake it up.

4. Wired Connection

To use the mouse in wired mode:

  1. Connect the mouse to your computer using the USB cable.
  2. The mouse will automatically switch to wired mode.

5. Pairing in Bluetooth (BT) Mode

  1. Slide the mode switch on the underside of the mouse to the 'BT' position.
  2. Press and hold the mode switch button for 3 seconds until the LED flashes blue. This indicates the mouse is in pairing mode.
  3. On your device (computer, laptop, tablet), go to Bluetooth settings and search for new devices.
  4. Select "REDRAGON M612RGB-PRO" from the list of available devices and connect.
  5. The LED will turn solid blue once successfully connected.
Underside of the Redragon M612 PRO mouse showing the model number, power ratings, and a switch for BT/OFF/2.4G modes.

Underside of the mouse with the mode switch for BT/OFF/2.4G.

Operating Instructions

1. Button Functions

The Redragon M612 PRO features 11 buttons, 9 of which are programmable:

Diagram labeling the 9 programmable buttons of the Redragon M612 PRO mouse: Left Button, Right Button, Rapid Fire Key, Scroll, DPI+, DPI-, Forward Button, Backward Button, Polling Rate +/-.

Labeled diagram of the mouse buttons.

  • Left Button: Standard left click.
  • Right Button: Standard right click.
  • Scroll Wheel: Scroll up/down, and middle click.
  • Forward Button: Navigates forward in web browsers/applications.
  • Backward Button: Navigates backward in web browsers/applications.
  • DPI+: Increases DPI sensitivity.
  • DPI-: Decreases DPI sensitivity.
  • Rapid Fire Key: Executes a rapid series of clicks (programmable).
  • Polling Rate +/-: Adjusts the polling rate.
  • Backlight Switch Button: Cycles through RGB backlight modes.
  • Mode Switch Button: (On underside) Switches between Wired, 2.4G, and Bluetooth modes.

2. DPI Adjustment

You can adjust the mouse's DPI (Dots Per Inch) sensitivity on the fly:

  1. Press the DPI+ button to increase the DPI level.
  2. Press the DPI- button to decrease the DPI level.
  3. The mouse supports 5 adjustable DPI levels: 500, 1000, 2000, 3000, and 8000 DPI.
  4. The LED color will change to indicate the current DPI level, as shown in the diagram below.
Diagram showing 5 adjustable DPI levels (200, 1000, 2000, 3000, 8000) and Polling Rates (125Hz, 250Hz, 500Hz, 1000Hz) with corresponding LED colors.

Adjustable DPI levels and Polling Rates.

3. Polling Rate Adjustment

The polling rate can be adjusted using the dedicated Polling Rate +/- button. Available polling rates are 125Hz, 250Hz, 500Hz, and 1000Hz.

4. Backlight Adjustment

The mouse features customizable RGB backlighting:

  1. Press the Backlight Switch Button to cycle through 6 different backlight modes.
  2. Press and hold the Backlight Switch Button for 3 seconds to turn the backlight off.

5. Software Instructions (Advanced Customization)

For advanced customization of buttons, DPI, polling rate, and backlight effects, download and install the official Redragon driver software:

  1. Visit the official Redragon website to download the specific driver software for the M612RGB-PRO model.
  2. Install the software on your computer.
  3. Launch the software to access features such as:
    • Button remapping for all 9 programmable buttons.
    • Custom DPI settings and profiles.
    • Advanced macro recording.
    • Detailed RGB lighting customization (7 backlit modes).
    • Adjusting debounce time.
  4. Save your customized profiles for different games or applications.
Screenshot of the Redragon M612RGB-PRO driver software interface, showing button remapping and debounce time settings.

Redragon M612RGB-PRO driver software for advanced customization.

Infographic highlighting key features of the Redragon M612 PRO mouse: 3-Mode Connection, Pro Optical Sensor, 8000 DPI Max, Rapid Fire Button, 9 Programmable Buttons, 10M Click Lifespan, Advanced Software, 7 Backlit Modes.

Key features of the Redragon M612 PRO mouse.

Maintenance

1. Cleaning

To maintain optimal performance and appearance:

  • Use a soft, dry cloth to wipe the mouse surface.
  • For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
  • Regularly clean the optical sensor on the underside of the mouse with a cotton swab to prevent tracking issues.
  • Avoid using harsh chemicals or abrasive materials, as these can damage the mouse.

2. Battery Safety Guidelines

CAUTION: Improper handling of the battery can lead to fire, explosion, or other hazards.

  • DO NOT impact the battery.
  • DO NOT disassemble the battery.
  • DO NOT expose the battery to high temperatures (e.g., direct sunlight, near heat sources).
  • DO NOT immerse the battery in water or other liquids.
  • DO NOT use damaged batteries.
  • DO NOT dispose of batteries in fire.
  • DO NOT short-circuit the battery terminals.
  • DO NOT remove the battery for purposes other than replacement by authorized personnel.
  • Dispose of batteries according to local regulations for electronic waste.

Troubleshooting

Mouse is moving slowly, inaccurately, or not responding:

  • Check the battery level. Recharge the mouse if the battery is low.
  • Ensure the USB receiver is properly connected to a USB port on your computer (for 2.4G wireless mode).
  • Ensure the mouse is within the effective range of the receiver or Bluetooth device.
  • Try connecting the USB receiver to a different USB port on your computer.
  • Clean the optical sensor on the underside of the mouse to remove any dust or debris.

Mouse disconnects frequently:

  • Ensure there are no strong interference sources nearby, such as other wireless devices, Wi-Fi routers, or large metal objects.
  • Update the mouse drivers and software to the latest version from the Redragon website.
  • If using Bluetooth mode, try re-pairing the mouse with your device.
  • If using 2.4G wireless mode, try moving the USB receiver to a port closer to the mouse or using a USB extension cable to position it optimally.

Backlight is not working or behaving unexpectedly:

  • Press the Backlight Switch Button to cycle through modes or turn it on.
  • Ensure the mouse battery is not critically low.
  • Check the backlight settings in the Redragon driver software.

Specifications

Feature Specification
Brand Name REDRAGON
Model M612 PRO (M612RGB-PRO)
Connection Type Wired, 2.4Ghz Wireless, Bluetooth
DPI (Max) 8000 DPI (Adjustable: 500/1000/2000/3000/8000)
Number of Buttons 11 (9 Programmable)
Number of Rollers 1
Hand Orientation Right
Acceleration 15 G
Movement Speed (IPS) 40
Polling Rate 125Hz/250Hz/500Hz/1000Hz
Backlight RGB (6 modes, 7 backlit modes via software)
Click Lifespan 10 Million Clicks
Dimensions (L x W x H) 21 cm x 15 cm x 5 cm (approximate package dimensions)
Weight 0.2 kg (approximate package weight)
Origin Mainland China

Warranty and Support

Within the warranty period, repair is guaranteed for failures due to electrical circuit problems. Other damages, such as those caused by misuse or physical impact, are not covered. Please retain your proof of purchase for warranty claims.

FCC Statement

FCC ID: TUVUS-D52651G

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

For further support or to download the latest drivers and software, please visit the official Redragon website.

A detailed user manual in PDF format is available for download: Redragon M612 PRO User Manual (PDF)

User Tips

  • Customize RGB: While the default RGB lighting is good, you can achieve more personalized effects and colors using the Redragon driver software.
  • Utilize Programmable Buttons: Take advantage of the 9 programmable buttons to assign macros or specific functions for different games or productivity tasks. This significantly enhances your gaming experience.
  • Value for Money: Many users find this mouse to be excellent value, especially when purchased during sales events.
  • Durability: Redragon mice are generally known for their robust build quality and long lifespan, with users reporting several years of trouble-free use.

Frequently Asked Questions (FAQ)

Q: Is the Redragon M612 PRO mouse new or used?
A: The product is new.
Q: Can I purchase multiple units of this mouse?
A: Yes, the product is sold individually, and you can purchase multiple units as needed.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.