XINOWY V6 PRO

Contents

XiNOWy V6 PRO Motorcycle Helmet Intercom User Manual

Model: V6 PRO

Introduction

The XiNOWy V6 PRO is a high-performance Bluetooth intercom system designed for motorcycle riders. It offers stable communication and enhances safety by providing hands-free operation for phone calls and music playback. The device features a robust, waterproof design and HD-Voice technology for clear audio.

Key features include:

  • Stable Helmet Bluetooth Intercom
  • Maximum talking distance of up to 800 meters (up to 1200-1500 meters in optimal conditions)
  • High-performance Bluetooth headset with a range of 10 meters
  • Automatic phone call reception
  • Waterproof design (IP65 rating)
  • HD-Voice for clear audio
  • Designed for various helmet types: MODULAR, MOTOCROSS, Open face, Full Face, Flip Up Helmet

Setup

Package Contents

The standard package typically includes:

  • XiNOWy V6 PRO Intercom Unit(s)
  • Helmet Mounting Clip(s)
  • Headphone/Microphone Set (with options for stick or soft mic)
  • USB Charging Cable
  • User Manual (PDF available here)

Component Identification

Familiarize yourself with the buttons and interfaces on your V6 PRO unit:

Diagram of XiNOWy V6 PRO intercom unit with labeled buttons and ports.
Figure 1: V6 PRO Button Layout
  1. MOTOR/A button (Power on)
  2. B button
  3. C button
  4. D button
  5. E button
  6. Phone button
  7. Volume +
  8. Volume -
  9. Power off
  10. Antenna
  11. Earphone interface / USB charger interface (Micro USB)

Installation Diagram

Follow these steps to correctly install the intercom unit on your helmet:

Step-by-step diagram showing how to install the intercom on a helmet.
Figure 2: Helmet Installation Steps
  1. Loosen the screws of the clip and install it on your helmet for a fixed position.
  2. Install the intercom unit onto the clip.
  3. Use the Velcro adhesive inside your helmet to secure the speakers and microphone. Choose between the stick (boom) or soft (wired) microphone based on your helmet type and preference.
  4. Organize any messy cables and tuck them inside your helmet foam for comfortable wearing.

Operating Instructions

Power On/Off

  • Power On: Long press the MOTOR button for approximately 2 seconds until the main device light flashes.
  • Power Off: Press the Power off button.

Connecting to Phone (GPS/MP3)

  1. Long press the Phone button for 5 seconds until both red and blue lights flash alternately.
  2. Enable Bluetooth on your phone (or GPS/MP3 device) and search for

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.