1. Introduction
Thank you for choosing the Xiaomi Mijia Smart Laser Rangefinder. This device is designed for precise and convenient distance measurements. Please read this manual carefully before using the product and keep it properly for future reference.

Figure 1: Xiaomi Mijia Smart Laser Rangefinder
2. Product Overview
2.1 Device Components

Figure 2: Device Components Diagram
- Laser Transmitter Lens
- Laser Receiving Lens
- Display
- Power/Measurement Button
- Type-C charging port
2.2 Display Indicators

Figure 3: Display Indicators Diagram
- Measurement reference / laser emission tips
- Historical measurement data
- Bluetooth connection status
- Power level
- Current measurement data
- Measurement unit
3. Setup
3.1 Important Note: App Region Setting
This version of the device is designed for the Chinese market. To use it with the Mi Home app, you must set the app's region to 'Chinese Mainland'.

Figure 4: Mi Home App Region Setting (Profile > Additional settings > Region > Chinese mainland)
3.2 Charging the Device
The product is equipped with a USB Type-C charging port. Use a standard USB charging cable (not included) to charge the device. If the product is not used for a long time, please fully charge it before use. Measurement is not possible during charging.
3.3 Installing the Mi Home App
Scan the QR code below or search for 'Mi Home' in your app store to download and install the Mi Home app. If you already have the app installed, you will be directed to the device connection page.

Figure 5: Mi Home App QR Code
3.4 Bluetooth Connection and Device Pairing
- When the device is powered on, its Bluetooth function will automatically activate, and the Bluetooth icon on the display will flash.
- Open the Mi Home app, log in to your account, and ensure the region is set to 'Chinese Mainland' (refer to Section 3.1).
- Tap the '+' icon in the upper right corner of the app's home page to enter the 'Add Device' page.
- On the 'Add Device' page, tap the '...' icon in the top right corner. Follow the on-screen prompts to scan the product's QR code (found on the device or packaging) to complete the pairing process.
- Once successfully connected, the Bluetooth icon on the device's display will remain solid. If the device fails to connect within 180 seconds, Bluetooth will automatically turn off.
App Connection Tips: If the QR code cannot be scanned, you can search for 'Mi Smart Laser Measure' within the app to add the device. Ensure your Mi Home app version is 6.9.200 or above for optimal compatibility. Due to continuous app updates, actual operations might vary slightly; always follow the latest in-app guidelines.
4. Operating Instructions
4.1 Power On/Off
- Power On: When the device is off, long-press the Power/Measurement Button (4) for more than 2 seconds. The display will light up, and the device will enter standby mode.
- Power Off: When the device is on, long-press the Power/Measurement Button (4) for 3 seconds to shut down the product. The device will automatically power off if no operation is performed within 180 seconds.
4.2 Measurement
- After powering on, short-press the Power/Measurement Button (4). The device will emit a laser for continuous measurement, and the screen will display real-time measurement data.
- Press the Power/Measurement Button (4) again to stop the laser emission. The screen will display the final measurement value. If connected to the Mi Home app, this data will be synchronized to the app's measurement list.
- The laser measure is primarily designed for indoor use. Direct outdoor sunlight can interfere with the laser's visibility and significantly reduce measurement accuracy. Outdoor use is not recommended.
- The measurement origin (datum) can be either the front or the rear of the device. When using the front-end reference, the device's length is not included in the measurement. When using the rear-end reference, the device's length (80mm) is included in the measurement.

Figure 6: Synchronous Data Storage with Mi Home App

Figure 7: Easy One-Button Operation

Figure 8: Smart Linkage with Mijia App for Dimensioning and Floor Plans

Figure 9: Point-and-Measure Functionality

Figure 10: Versatile Measurement Scenarios
4.3 Stand Switching (Measurement Reference Point)
The default measurement reference point is the end stand (rear of the device). To switch to the front stand (front of the device) as the reference point, quickly double-click the Power/Measurement Button (4). The reference point will reset to the end stand after each power-on.
4.4 Unit Switching
The device supports two measurement units: meters (m) and feet (ft). The default unit is meters. To switch units, you must do so within the product settings of the Mi Home app. Ensure the device is powered on and connected via Bluetooth to the app when changing units.

Figure 11: Mi Home App Unit Switching
4.5 Reset to Factory Settings
To restore the device to its factory settings, long-press the Power/Measurement Button (4) for 7 seconds while the device is powered on or off. The full screen will blink twice to indicate a successful reset.
5. Care and Maintenance
- Avoid storing or using the product in high-temperature or high-humidity environments for extended periods. For long-term storage, keep the device in a room-temperature, normal-humidity environment and charge it every six months.
- Keep the product surface clean. Use a damp, soft cloth to wipe off dust. Do not use corrosive detergents. The laser transmitting and receiving lenses should be cleaned gently, similar to optical lenses.
6. Troubleshooting
Refer to the table below for common issues and their solutions:
| Information | Cause | Solution |
|---|---|---|
| Battery symbol blinking | Low battery | Please charge |
| Unable to measure Display shows "----" | Excessively weak laser reflection (e.g., black test surfaces) | Measure targets with high reflexes or use a reflective surface |
| Measuring range exceeded | Use the product within its specified measuring range | |
| Measurement moving too fast | Move the product slowly or keep it stable | |
| Err01 | Insufficient power to emit laser light | Please charge |
| Err02 | Insufficient power to emit laser light | Use within the specified temperature range |
7. Specifications
- Model Number: MJJGCJYD001QW
- Brand: XIAOMI
- Power Source: DC
- Battery: Included (non-removable, rechargeable)
- Inbox Adaptor: No
- Product Length: 80mm
- Laser Class: Class 2
- Laser Output: <1mW
- Laser Wavelength: 630-680nm
- Origin: Mainland China
8. Safety Warnings
Before using the product for the first time, please read all safety regulations and operating instructions carefully.
- Failure to follow instructions may result in product damage, inaccurate measurements, or personal injury.
- Do not open or repair the product. Illegal modification of the laser transmitter is strictly prohibited.
- Keep out of reach of children.
- Never look directly into the laser beam or point it at others' eyes or reflective surfaces.
- Product electromagnetic radiation may interfere with other equipment. Do not use near airplanes, medical equipment, or in flammable/explosive environments.
- Dispose of used batteries and end-of-life products according to local regulations, not with household garbage.

Figure 12: Laser Radiation Warning Labels
9. User Tips
- App Region is Key: As highlighted in the setup, ensure your Mi Home app region is set to 'Chinese Mainland' for successful device pairing and full functionality, regardless of your physical location.
- Verify Accuracy: While highly accurate, for critical measurements, it's always good practice to cross-reference with a traditional tape measure initially to build confidence.
- Portability: This device is very compact and convenient to carry in a pocket, making it ideal for quick measurements on the go.
- Indoor Focus: For best results and accuracy, use the device indoors. Outdoor use, especially in bright sunlight, can significantly impair laser visibility and measurement reliability.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original seller or the official Xiaomi support channels in your region.
A detailed user manual is also available in PDF format for download: Xiaomi Mijia Smart Laser Rangefinder User Manual (PDF)