KEVANLY Touch-Activated Car Interior Light

1. Product Overview

The KEVANLY Touch-Activated Car Interior Light provides versatile, multi-color ambient lighting for your vehicle or home. Featuring touch-controlled dimming and color switching, a built-in rechargeable battery, and easy installation, it enhances visibility and atmosphere wherever you need it.

Image: KEVANLY Touch-Activated Car Interior Lights in use.

2. Safety & Warnings

• Keep the device and its charging cable out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use (auxiliary lighting).
• Inspect the product before each use; do not use if damaged.
• Follow all installation and operation guidelines to avoid injury or damage.
• Do not expose the device to water or moisture.
• This product is for auxiliary lighting/decorative purposes only. It is not a substitute for primary vehicle or home lighting fixtures.
• When used inside vehicles, ensure the light does not obstruct the driver's line of sight or interfere with airbag deployment.
• The manufacturer assumes no liability for malfunctions or damages resulting from improper use.

3. Package Contents

Please check the package for the following items:

• 1 x Touch Lighting Unit
• 1 x USB Charging Cable (approx. 28.5 cm)
• 1 x Car Double-Sided Adhesive Tape (for mounting)

Image: Packaging Accessories.

4. Setup & Installation

4.1. Initial Charging

1. Connect the included USB charging cable to the light unit.
2. Plug the other end of the USB cable into a 5V USB power source (e.g., car USB port, wall adapter, computer USB port).
3. The indicator light on the unit will illuminate during charging.
4. The indicator light will turn off once the battery is fully charged (approximately 40 minutes).
5. Unplug the cable after charging.

Image: Connecting the light for charging.

4.2. Mounting

The light can be mounted using the provided double-sided adhesive tape or simply placed on a surface.

• For In-Car Use:
  1. Clean the desired mounting surface thoroughly to ensure it is free of dust, grease, and moisture.
  2. Peel off one side of the protective film from the double-sided adhesive tape and apply it firmly to the base of the light unit.
  3. Peel off the remaining protective film from the tape.
  4. Carefully position the light on a flat surface inside your vehicle. Press firmly for a few seconds to secure it.
  5. Ensure the chosen location does not obstruct the driver's view, interfere with vehicle controls, or impede airbag deployment.
• For Home Use: Simply place the light on a table, bedside cabinet, or any desired surface.

Image: Versatile placement options in a car interior.

5. Operating Instructions

5.1. Power On/Off

• Lightly touch the touch-sensitive area on the light unit to power it on.
• Touch the same area again to power it off.

5.2. Brightness Adjustment

• While the light is on, press and hold the touch-sensitive area.
• The brightness will cycle through brighter and dimmer levels.
• Release your finger when the desired brightness level is reached to lock it.

5.3. Color Switching

• While the light is on, short press (tap) the touch-sensitive area.
• The light will cycle through different modes: Solid Color, Breathing (slow fade), and Gradient (smooth color transition).

Image: RGB Color Display and Breathing Gradient.

5.4. Product Demonstration Video

6. Maintenance

• Regularly wipe dust from the lamp surface with a soft, dry cloth to maintain optimal light transmission.
• Avoid violent impacts or pulling on the lamp body to prevent damage to the battery or LED components.
• For long-term storage, fully charge the device before storing it. Recharge the battery every 1-2 months to maintain battery health.
• Ensure the mounting surface is clean and dry before applying the adhesive tape to ensure secure adhesion and prevent slippage.

7. Troubleshooting

8. Specifications

9. User Tips

• Mounting for Recharging: While the provided double-sided tape offers a secure hold, consider how often you'll need to remove the light for recharging. If frequent removal is desired, you might explore alternative mounting solutions that allow for easier detachment.
• Versatile Placement: Users have found success placing these lights in various locations, including car roofs, footwells, door panels, and center consoles, to achieve desired lighting effects.
• Brightness and Color: Experiment with the touch controls to find your preferred brightness and color mode (solid, breathing, or gradient) for different moods or needs.
• Quantity: This manual describes a single light unit. If you require lighting for multiple areas, consider purchasing additional units.

10. Compliance Information

This product complies with EU RoHS and REACH environmental directives, meets LVD 2014/35/EU low-voltage electrical regulations, and EMC 2014/30/EU electromagnetic compatibility regulations. The battery conforms to EU safety standards and is suitable for use in the EU market.

11. Warranty & Support

For product support, warranty inquiries, or technical assistance, please contact the manufacturer or your point of purchase.

Manufacturer Information:

Guangzhou Kejie Trading Co.
Room 302, No. 10, Ou Gang North Street, Ke Mu Long West Road,
Tianhe District, Guangzhou City, Guangdong Province, China

EU Authorized Representative:

SUCCESS COURIER SL
Calle de RIO TORMES 13A, oficina 1,
Fuenlabrada, Madrid, 28947 Spain