Tuya TH08/TH08Z

Contents

Tuya WiFi/ZigBee Temperature and Humidity Sensor User Manual

Models: TH08 / TH08Z

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya WiFi/ZigBee Temperature and Humidity Sensor. This smart device allows you to monitor ambient temperature and humidity in real-time, integrate with smart home platforms like Tuya, Smart Life, Google Assistant, and Alexa, and set up intelligent automation scenarios.

Overview of the Temperature and Humidity Sensor, showing both WiFi and Zigbee versions, compatibility with Tuya, SmartLife, Google Assistant, and Alexa, and a sample app display.

Figure 1: Product Overview and Smart Home Integration

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Keep the device away from water and high humidity environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • Use only specified battery types (AAA x 2) and ensure correct polarity.
  • Keep out of reach of children.
  • Avoid extreme temperatures and direct sunlight.

3. Package Contents

Verify that all components are present:

  • Temperature and Humidity Sensor (TH08 or TH08Z)
  • User Manual (this document, or refer to the PDF version: User manual (PDF))
  • (AAA batteries are NOT included and must be purchased separately)

4. Specifications

Table 1: Product Parameters
Parameter Value
Model Number TH08, TH08Z
Size 7.2cm x 2.5cm x 2cm (2.834in x 0.984in x 0.787in)
Input Voltage DC3V (AAA x 2, not included)
Quiescent Current ≤30uA
Low Power Undervoltage ≤2.5V
Wireless Protocol (WiFi version) 2.4GHz IEEE 802.11b/g/n
Wireless Protocol (Zigbee version) Zigbee
Temperature Measure Range -10°C to 60°C
Humidity Measure Range 0% RH - 99% RH
Smart Home Platform Alexa, Tuya, Google Assistant
Product dimensions and technical specifications table.

Figure 2: Product Dimensions and Specifications

5. Setup

5.1. Install Smart Life App

Before device binding, install the "Smart Life" APP on your smartphone and register an account using your email address. The app can be downloaded by scanning the QR code below or by searching for "Smart Life" in Google Play Store or Apple App Store.

Setup instructions and diagram for connecting the Zigbee sensor to the Smart Life app via a Zigbee gateway.

Figure 3: Smart Life App QR Code and Setup Steps

5.2. Device Binding (Zigbee Version)

Notice: The Zigbee version of this device requires a Zigbee Gateway to function. Ensure your Zigbee gateway is successfully connected to your WiFi network and the Smart Life app before proceeding.

  1. In the Smart Life app, select the Zigbee gateway you have already connected.
  2. Click on the "Gateway" section, then click "Add subdevice".
  3. Press and hold the button on the Temperature and Humidity Sensor for 5 seconds. The LED indicator on the sensor will flash rapidly.
  4. The app will initiate a search for the device. Once detected, it will be added successfully.

5.3. Device Binding (WiFi Version)

For the WiFi version, the pairing process is generally similar. After installing the Smart Life app, select to add a new device, choose the sensor category, and follow the in-app instructions to connect the sensor to your home WiFi network. Typically, this involves putting the device into pairing mode (often by pressing and holding a button) and confirming the network details in the app.

6. Operating Instructions

Once the sensor is successfully added to the Smart Life app, you can access its features and settings.

6.1. App Interface and Real-time Monitoring

Click on the sensor icon in the app to enter its interface. Here you can view real-time temperature and humidity readings, historical data, and adjust settings.

6.2. Temperature Unit Switch

You can switch the temperature unit between Fahrenheit (°F) and Celsius (°C) directly within the app settings for the sensor.

Screenshot demonstrating the Fahrenheit and Celsius unit switching feature within the app.

Figure 4: Temperature Unit Switching

6.3. Smart Linkage Function

Utilize the Smart Life app's automation features to create intelligent scenarios based on temperature and humidity readings. For example, you can set up rules to:

  • Turn on a WiFi air conditioner when the indoor temperature reaches a certain threshold (e.g., 28.2°C).
  • Turn on a WiFi humidifier when the humidity drops below a specified percentage (e.g., 72%).
Diagram illustrating smart linkage functions, such as turning on an air conditioner based on temperature or a humidifier based on humidity.

Figure 5: Smart Linkage Examples

Detailed diagram of intelligent linkage setup within the app, showing how to trigger an action (e.g., turn on AC) based on sensor readings.

Figure 6: Intelligent Linkage Setup in App

6.4. Voice Control

The sensor is compatible with Amazon Alexa and Google Home. Link your Smart Life account to your preferred voice assistant to query temperature and humidity information using voice commands.

  • Alexa: "Alexa, what is the temperature in the room?"
  • Google Home: "Google, what is the humidity in the living room?"
Image showing voice control integration with Amazon Alexa and Google Home for querying temperature and humidity.

Figure 7: Voice Control Integration

7. Maintenance

7.1. Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7.2. Battery Replacement

The device uses 2 AAA batteries. When the battery level is low (indicated by a low power undervoltage of ≤2.5V), replace both batteries with new ones, ensuring correct polarity. The app may also notify you of low battery status.

8. Troubleshooting

  • Device not detected during pairing:
    • Ensure the device is in pairing mode (LED flashing rapidly).
    • For Zigbee version, confirm your Zigbee gateway is online and properly connected to the Smart Life app.
    • For WiFi version, ensure your phone and the device are on the same 2.4GHz WiFi network.
    • Try moving the device closer to the gateway/router.
    • Check battery levels.
  • Inaccurate readings:
    • Ensure the sensor is not placed in direct sunlight, near heat sources (like radiators), or in areas with poor air circulation (e.g., behind curtains).
    • Allow some time for the sensor to stabilize after placement.
  • Device offline in app:
    • Check battery levels and replace if necessary.
    • Verify your WiFi network (for WiFi version) or Zigbee gateway (for Zigbee version) is functioning correctly.
    • Restart the device and check your network connection.

9. User Tips

  • Home Assistant Integration: Users have reported successful integration with Home Assistant via Zigbee2mqtt or Tuya accounts, offering advanced automation possibilities.
  • Quick Setup: The device is generally easy and quick to set up, especially if your Smart Life app and gateway (for Zigbee) are already configured.
  • Check All Units: If purchasing multiple sensors, it's advisable to test each unit upon arrival to ensure full functionality.

10. Frequently Asked Questions (FAQ)

Q: Can this sensor be used outdoors?
A: This device is designed for indoor use. Exposure to outdoor elements like rain, direct sunlight, and extreme temperatures may damage the device and affect its accuracy.
Q: Can I use this sensor to control a radiator behind a curtain?
A: While the sensor can detect temperature, placing it behind a curtain or near a radiator might lead to inaccurate room temperature readings, as it will primarily measure the localized temperature in that confined space. For accurate room temperature control, place the sensor in an open area away from direct heat sources or drafts. This sensor acts as a thermometer/hygrometer and can be linked to smart thermostats or IR remotes (sold separately) for control.

11. Warranty and Support

For any issues or questions not covered in this manual, please refer to the official Smart Life app support or contact the seller directly. Keep your purchase receipt for warranty claims.

© 2024 Tuya Smart. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.