1. Introduction
The JONSBO NF-1 RAM Memory Module Cooling Radiator is designed to enhance the cooling performance of your DDR4 or DDR5 RAM modules, ensuring stable operation and improved longevity. Featuring dual 50mm fans with 4-pin PWM control and 3-pin ARGB synchronization, this cooler provides efficient heat dissipation and customizable lighting effects.
2. Setup and Installation
2.1 Package Contents
Ensure all components are present before proceeding with installation:
- Iron mesh cover
- 5020 Fans (x2)
- Fixed bracket
- Fixing screws
- Adapter studs (if applicable for your motherboard/RAM configuration)
2.2 Physical Installation
- Identify the RAM slots on your motherboard where the cooler will be installed.
- Attach the 5020 fans to the fixed bracket using the provided screws.
- Secure the iron mesh cover over the fans and bracket.
- Mount the assembled cooler onto your motherboard. The fixed bracket typically attaches to existing screw points near the RAM slots. Use adapter studs if necessary to achieve proper clearance and secure fit.
- Ensure the cooler does not obstruct other components such as CPU cooler or GPU.
2.3 Wiring Connections
- Fan Power (PWM): Connect the 4-pin PWM cable from the cooler to an available 4-pin fan header on your motherboard. This allows for dynamic fan speed control based on temperature.
- ARGB Lighting: Connect the 3-pin ARGB cable to a compatible 5V 3-pin ARGB header on your motherboard. Ensure it is a 5V ARGB header and not a 12V RGB header to prevent damage.
2.4 AIDA64 Remote Sensor LCD Setup (Optional)
If your JONSBO NF-1 model includes an LCD display and you wish to use it with AIDA64 for system monitoring, follow these steps:
- Install AIDA64 Extreme: Download and install AIDA64 Extreme from the official website.
- Configure AIDA64 LCD Settings:
- Open AIDA64 Extreme.
- Click on File > Settings.
- In the left pane, select LCD.
- In the preview resolution field, enter 1440x1440.
- Check the option Enable Remote Sensor LCD support.
- Click Apply, then Confirm.
Navigate to File > Settings in AIDA64 Extreme.
Configure LCD settings in AIDA64, including resolution and remote sensor support. - Allow Firewall Access:
- If prompted by Windows Defender Firewall, click Allow access for AIDA64 Extreme.
Grant AIDA64 access through Windows Defender Firewall. - Import LCD Layout:
- Click Import in the AIDA64 LCD settings.
- Select the provided .rslcd file (LCD layout file) and click Open.
- Confirm by clicking Yes if asked to overwrite existing settings.
- Find Your PC's IP Address:
- Press Win + R to open the Run dialog.
- Type cmd and press Enter.
- In the Command Prompt, type ipconfig and press Enter.
- Note down your PC's IPv4 Address (e.g., 192.168.10.145).
- Configure Dynamic Template HTML:
- Open the dynamic template.html file (provided with the cooler software) using Notepad or a text editor.
- Locate the line similar to
window.location.href="http://192.168.10.145/"; - Replace the IP address with your PC's IPv4 Address obtained in the previous step.
- Save the file.
- Display on Cooler Screen:
- Open the modified dynamic template.html file in a web browser.
- Drag the browser window to the cooler's LCD screen.
- Press F11 to switch to full-screen mode.
- Set AIDA64 to Auto-Start with Windows:
- Press Win + R to open the Run dialog.
- Type regedit and press Enter to open the Registry Editor.
- Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run. - Right-click in the right pane, select New > String Value.
- Rename the new string value to dynamic template.html.
- Double-click the new string value and set its Value data to the full path of your dynamic template.html file (e.g.,
C:\Users\YourUser\Desktop\dynamic template.html). - Click OK and close the Registry Editor.
3. Operation
3.1 Fan Control (PWM)
The NF-1 cooler's fans are PWM controlled, meaning their speed automatically adjusts based on your system's temperature, as managed by your motherboard's BIOS/UEFI or fan control software. The fan speed ranges from 600 to 3600 RPM.
3.2 ARGB Lighting Control
The 3-pin ARGB lighting can be synchronized with various motherboard RGB ecosystems. Connect the ARGB cable to a compatible 5V 3-pin ARGB header on your motherboard. You can then control the lighting effects using your motherboard's software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync).
3.3 LCD Display (if applicable)
Once the AIDA64 Remote Sensor LCD setup is complete, the cooler's display will show real-time system information as configured in AIDA64. This can include CPU temperature, fan speeds, memory usage, and more.
4. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your JONSBO NF-1 RAM cooler.
- Dust Removal: Periodically clean the fans and heatsink fins to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air or a soft brush.
- Fan Inspection: Check the fan blades for any obstructions or signs of wear. Ensure they spin freely without unusual noise.
- Cable Management: Ensure all cables are securely connected and not interfering with fan operation or other components.
Always power off your PC and disconnect it from the power source before performing any maintenance.
5. Troubleshooting
5.1 Fans Not Spinning / Noisy
- Check the 4-pin PWM cable connection to the motherboard.
- Ensure the fan header on the motherboard is enabled in BIOS/UEFI.
- Inspect for any physical obstructions preventing fan rotation.
- If fans are noisy, ensure they are securely mounted and free of dust.
5.2 ARGB Lighting Not Working
- Verify the 3-pin ARGB cable is correctly connected to a 5V 3-pin ARGB header on your motherboard.
- Ensure your motherboard's ARGB software is installed and configured correctly.
- Check if the ARGB header is enabled in your motherboard's BIOS/UEFI.
5.3 LCD Display Issues (if applicable)
- Review the AIDA64 setup steps carefully, especially the IP address configuration in the HTML file and the Windows Firewall settings.
- Ensure AIDA64 Extreme is running and configured to output to the remote sensor LCD.
- Verify network connectivity between your PC and the cooler's display (if it operates over network).
- If the display is blank, check the power connection to the cooler.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | NF-1 |
| Cooler Type | Low Profile |
| Supported RAM | DDR4, DDR5 |
| Dimensions (L x W x H) | 120mm x 62mm x 28.1mm (4.72in x 2.44in x 1.1in) |
| Memory Compatibility Height | 54mm (without adapter), +8mm with adapter |
| Fan Bearing Type | 50mm*50mm*20mm |
| Fan Speed | 600 - 3600 RPM (±10%) |
| Fan Air Flow | (1.30-9.11) * 2 CFM (MAX) |
| Fan Air Pressure | 0.17-1.6 mmH2O |
| Fan Noise Level | 22.4 dB(A) (MAX) |
| Fan Life (MTTF) | ≥20000h @25°C |
| Blade Quantity | 7 |
| Power Interface | FAN 4PIN PWM / LED 3PIN ARGB |
| Rated Voltage | Fan 12V, LED 5V |
| Rated Current | Fan 0.06A, LED 0.24A |
| Power Consumption | Fan 0.72W (MAX), LED 1.2W |
| High-concerned chemical | None |
| Origin | Mainland China |
7. User Tips
- For optimal cooling, ensure good overall case airflow.
- When installing, double-check RAM clearance, especially with large CPU air coolers.
- Utilize your motherboard's fan control software to create custom fan curves for a balance of performance and acoustics.
- Experiment with different ARGB lighting patterns to match your PC build's aesthetic.
8. Warranty and Support
For specific warranty information, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for warranty claims.
A detailed user manual in PDF format is available for download. You can access it via the following link: JONSBO NF-1 User Manual (PDF)