1. Introduction
Thank you for choosing the Opansten C28 Bluetooth 5.3 Audio Receiver Transmitter. This versatile device allows you to easily convert wired audio signals into wireless signals (Transmitter mode) or receive wireless signals to output to wired audio devices (Receiver mode). Enjoy high-quality audio and hands-free calling with this compact and practical adapter.

2. Package Contents
Please check the box for the following items:
- 1 x Main Engine (C28 Device)
- 1 x Charge Cable (USB)
- 1 x 3.5mm Audio Head (AUX Cable)
- 1 x User Manual
3. Product Overview
Familiarize yourself with the device's components and their functions:

Interface Diagram
- Multifunction Button: Power On/Off, Play/Pause.
- 3.5mm Aux In/Out Port: For audio connection.
- TX/RX Mode Key: Switch between Transmitter (TX) and Receiver (RX) modes.
- Microphone: For hands-free calling.
- Indicator Light: Displays device status (red for TX, blue for RX).
- 5V Charging Port: For charging the device.
4. Specifications
| Feature | Specification |
|---|---|
| Wireless Version | Bluetooth 5.3 |
| Battery Capacity | 140 mAh |
| Battery Life | Approx. 4 hours |
| Working Range | Up to 10 meters (open area, without obstacles) |
| Charging Indicator | Red light on during charging, off when fully charged |
| Wireless Type | Bluetooth |
| Interface | 3.5 MM AUX |
| Memory Card Support | No |
| Apt-x Support | No |
| AAC Support | No |
| High Definition Support | None |
| Content | AUDIO |

5. Setup and Operation
5.1 Charging the Device
Before first use, fully charge the C28. Connect the supplied USB charge cable to the 5V charging port on the device and to a USB power source. The red indicator light will be on during charging and will turn off once fully charged.
5.2 Power On/Off
- To Power On: Long press the Multifunction Button for 3 seconds.
- To Power Off: Long press the Multifunction Button for 3 seconds.
5.3 Receiver Mode (RX) - Receiving Wireless Audio
Use this mode to receive Bluetooth audio from your phone/tablet and output it to wired speakers, car audio, or headphones.
- Power on the C28 device.
- Slide the TX/RX Mode Key to the RX position. The indicator light will flash blue.
- Connect the C28's 3.5mm Aux Out port to your wired audio device (e.g., car AUX input, speaker AUX input) using the supplied 3.5mm audio cable.
- On your phone or other Bluetooth device, search for Bluetooth devices and select "C28" to pair.
- Once successfully paired, the blue indicator light will stop flashing and remain solid. You can now play audio from your device wirelessly to your connected audio system.
5.4 Transmitter Mode (TX) - Transmitting Wired Audio Wirelessly
Use this mode to transmit audio from non-Bluetooth devices (like TVs, PCs, MP3 players) to Bluetooth headphones or speakers.
- Power on the C28 device.
- Slide the TX/RX Mode Key to the TX position. The indicator light will flash red.
- Connect the C28's 3.5mm Aux In port to the audio output of your non-Bluetooth device (e.g., TV headphone jack, PC audio out) using the supplied 3.5mm audio cable.
- Put your Bluetooth headphones or speaker into pairing mode.
- The C28 will automatically search for and connect to your Bluetooth receiving device.
- Once successfully connected, the red indicator light will stop flashing and remain solid. Audio from your source device will now be transmitted wirelessly.

6. Hands-Free Calling (Receiver Mode Only)
When the C28 is in Receiver (RX) mode and connected to your smartphone, you can use its built-in microphone for hands-free calls.
- Answer/End Call: Short press the Multifunction Button.
- Reject Call: Long press the Multifunction Button.
- Redial Last Number: Double-press the Multifunction Button.

7. Troubleshooting
7.1 No Sound in Receiver (RX) Mode
- Ensure your mobile device's Bluetooth is connected to "C28".
- Verify that your speaker or car audio system is set to the correct AUX input mode.
- Check that the 3.5mm audio cable is securely connected to both the C28 and your audio device.
- Adjust the volume on both your mobile device and the connected audio system.
7.2 Cannot Connect in Transmitter (TX) Mode
- Confirm the C28 is in Transmitter (TX) mode (red light flashing).
- Ensure your Bluetooth headphones or speaker are in pairing mode.
- Some wireless headsets may require initialization (factory reset) before they can connect to a new transmitter. Refer to your headset's manual.
- Try restarting both the C28 and your receiving Bluetooth device.
7.3 Short Bluetooth Range or Intermittent Connection
- Ensure there are no major obstacles (walls, metal objects) between the C28 and the connected Bluetooth device.
- Keep the devices within the 10-meter operating range.
- Avoid strong electromagnetic interference from other wireless devices.
8. Maintenance and Care
- Keep the device dry. Do not expose it to moisture or liquids.
- Do not attempt to disassemble or modify the device. This will void any warranty.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place away from extreme temperatures.
- The battery is not user-replaceable.
9. User Tips
- For optimal audio quality, ensure the volume on your source device is set to a moderate level before adjusting the volume on your receiving device.
- Always fully charge the device before extended use to ensure the full 4 hours of battery life.
- If using in a car, ensure the C28 is securely plugged into the AUX port to prevent accidental disconnections.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.