1. Introduction
Thank you for choosing our Customized Metal Push Button Switch. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new switch. Please read it thoroughly before use and retain it for future reference.
2. Safety Information
⚠️ Warning & Safety Information
- Use only as intended; follow operating instructions.
- Do not modify the product.
- Do not exceed rated voltage/current/power.
- Not suitable for wet locations; keep away from water.
- Keep out of reach of children; small parts may cause choking hazard.
- This product complies with applicable EU directives.
3. Product Features
- Material: Alloy (Silver: copper, Black: aluminum)
- Switch Type: Push Button Switch, 1NO1NC
- Functions: Momentary (Self-reset) / Latching (Self-Locking)
- Opening Diameter Options: 16mm, 19mm, 22mm
- LED Colors: Red, Green, Yellow, Blue, White, Purple, Orange
- LED Voltage: Default 12-24V (3V, 6V, 48V, 110V, 220V available upon request)
- Current Rating: 5A (for 3-6V, 12-24V), 3A (for 220V)
- Certification: CCC
- Application: Suitable for Car, Boat, Motorcycles, and other mechanical equipment.
- Customization: Supports custom engraving of symbols.
4. Specifications
| Attribute | Value |
|---|---|
| Item Type | SWITCHES |
| Brand Name | FENGYIELE |
| Is Smart Device | No |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Weight | 0.035 kg |
| Package Dimensions (L x W x H) | 18cm x 15cm x 5cm |
Dimensions

Figure 1: Switch Dimensions with Socket
| Diameter | Mounting Hole (M) | Thread Length | Total Length (excluding pins) |
|---|---|---|---|
| 16mm | M16*1 | 15 | 33 |
| 19mm | M19*1 | 15 | 33 |
| 22mm | M22*1 | 15 | 33 |
5. Package Contents
- 1 x Customized Metal Push Button Switch
- 1 x 15cm Wire Harness with Socket
6. Installation
6.1 Wiring with Socket
The switch comes with a convenient 15cm wire harness and socket for easy connection. The socket snaps securely onto the switch pins, preventing accidental disconnections due to vibration.

Figure 2: Switch with 15cm Socket and Wires
6.2 Basic Wiring Diagram
The provided OCR image illustrates a basic wiring setup for the switch with its socket. The four wires typically correspond to:
- Red: Positive (+) for the switch function.
- Yellow: Positive (+) for the LED illumination.
- Blue: Negative (-) for the switch function.
- Green: Negative (-) for the LED illumination.
Connect the red wire to your power source's positive terminal and the blue wire to the negative terminal for the switch's primary function. For LED illumination, connect the yellow wire to the positive terminal and the green wire to the negative terminal. Ensure the voltage matches the switch's rated LED voltage (e.g., 12V or 24V).

Figure 3: Basic Wiring Diagram for Switch and LED
6.3 Alternative Wiring (Soldering)
If you prefer not to use the wire harness, the switch pins have holes for easy soldering. Ensure proper soldering techniques are used to avoid damage to the switch or creating short circuits.
7. Customization
Our metal push button switches support custom engraving of symbols. If you require a specific symbol, please note the serial number of the desired icon (e.g., "C7") when placing your order or contact customer service with your request.

Figure 4: Available Custom Symbols for Engraving
Video 1: Demonstration of various illuminated custom symbols on the switches.
8. Operating Instructions
8.1 Switch Functionality
- Momentary (Self-reset): The switch remains activated only while pressed. It returns to its original state upon release.
- Latching (Self-Locking): The switch remains activated after being pressed once and stays in that state until pressed again to deactivate.
8.2 LED Illumination
The integrated LED provides clear visual feedback. The light effect is designed to be soft and not dazzling. The LED can be wired independently or to illuminate when the switch is activated, depending on your wiring configuration (refer to Section 6.2).
9. Maintenance
- Clean the switch surface with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents that may damage the metal finish or engraved symbols.
- Ensure connections remain secure and free from corrosion.
10. Troubleshooting
- Switch not responding: Check all wiring connections for proper contact. Verify the power supply is active and within the rated voltage.
- LED not illuminating: Ensure the LED wires are correctly connected to the power source. Check the LED voltage rating against your power supply.
- Switch feels loose: Tighten the mounting nut if the switch is wobbly.
11. User Tips
- The engraved symbols offer a premium feel and durability compared to stickers.
- The included wire harness simplifies installation and provides a solid connection, reducing issues from vibration.
- Consider the specific voltage requirements for the LED when ordering, especially if different from the default 12-24V.
12. Frequently Asked Questions (FAQ)
- Q: How do I choose a specific logo for the button?
- A: When purchasing, you can specify the desired logo by noting its alphanumeric code (e.g., "C7") in the order details or by contacting the seller directly through chat.
- Q: Does pressing the self-locking button change the LED color?
- A: The LED color is fixed based on your selection (e.g., LED Blue, LED Red). The self-locking function refers to the mechanical action of the switch, not a change in LED color upon activation.
- Q: Can I get buttons with 5V LED voltage?
- A: Yes, while the default LED voltage is 12-24V, 3V, 6V, 48V, 110V, and 220V options are available upon request. Please contact the seller to confirm availability for your specific needs.
- Q: What are the color codes for the wires in the socket?
- A: Typically, Red is for switch positive, Yellow for LED positive, Blue for switch negative, and Green for LED negative. Refer to the wiring diagram in Section 6.2 for a visual guide.
13. Warranty and Support
For any issues or questions regarding your product, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims.
A detailed user manual in PDF format may also be available. Please refer to the product page for a link to the User Manual (PDF).