NOCCLILI KLY009

Contents

NOCCLILI KLY009 Lint Remover User Manual

Model: KLY009

1. Introduction

Thank you for purchasing the NOCCLILI KLY009 LED Digital Electric Lint Remover. This device is designed to efficiently remove lint, fuzz, and pills from various fabrics, restoring your garments to a fresh appearance. Featuring a large-capacity rechargeable battery, an intelligent digital display for power monitoring, and convenient Type-C charging, this lint remover offers a powerful and user-friendly experience.

2. Package Contents

Please check the package for the following items:

  • 1 x NOCCLILI KLY009 Lint Remover
  • 1 x Stainless Steel Six-Blade Blade (pre-installed or spare)
  • 1 x Type-C Charging Cable
  • 1 x Cleaning Brush
  • 1 x User Manual
Grey lint remover with included accessories
Figure 2.1: Grey lint remover with included accessories (stainless steel six-blade, Type-C charging cable, cleaning brush).
White lint remover and USB cable on wood
Figure 2.2: White lint remover and its USB charging cable on a wooden surface.

3. Specifications

Brand NameNOCCLILI
Model NumberKLY009
Power SourceRechargeable Battery (500mA Lithium)
Charging TypeType-C USB
Charging Time1-2 Hours
MaterialABS
UsageWoolen Clothes, General Fabric Cleaning
FeatureEco-Friendly, LED Digital Display
ProductionBlades (Stainless Steel Six-Blade)
CertificationsCE, FCC, RoHS
OriginMainland China
Product Dimensions (Approx.)15 cm (Length) x 8 cm (Width) x 7 cm (Height)
Product Weight (Approx.)0.179 kg

4. Safety Instructions

Please read all safety warnings and instructions carefully before use to prevent injury or damage.

  • Charging Safety: When pulling out the charging cable, hold the end of the charging plug. Do not pull the power cord itself, as this can damage the cord or connector. Do not go out when charging, as poor insulation could lead to fire or electric shock.
  • Blade Safety: The blade is very sharp. Exercise extreme caution when handling or cleaning the blade area. Do not insert fingers or metal objects into the mesh cover.
  • Operation Safety: Do not turn on the machine when installing or removing the cutter head or net cover. Ensure the net cover and cutter head are correctly installed before use; improper installation can cause injury or damage. Do not press the knife head directly onto clothes, as this may damage the fabric.
  • Product Integrity: The cutter head of the net cover is thin; do not press it hard or hit it with hard objects, as this can damage the blade edge. Confirm the knife mesh is intact and undamaged before use; a damaged mesh can harm clothing.
  • Intended Use: This product is designed solely for general fabric lint removal. Using it for other purposes may lead to accidents or malfunctions.
  • Children: Keep this product out of reach of children. It is not a toy and can cause harm.
  • Environment: Do not expose the product to high temperatures or direct sunlight.

5. Setup

5.1 Initial Charging

Before first use, fully charge the lint remover. Connect the provided Type-C USB cable to the device's charging port and the other end to a 5V-1A USB power adapter (not included). The intelligent digital display will show the charging progress (e.g., 100% when fully charged). A full charge typically takes 1-2 hours.

Lint remover digital display showing battery and charging
Figure 5.1: Intelligent digital display showing battery level (86%) and charging status (100%).

5.2 Blade Guard Installation

Ensure the blade guard (net cover) is correctly and securely installed. The device features an anti-mistake design point: the product will only operate when the blade guard is tightly pressed against this foolproof design point. Always ensure it is properly seated before turning on the device.

Diagram of blade guard installation and usage precautions
Figure 5.2: Diagram illustrating the anti-mistake design point for blade guard installation and proper usage precautions.

6. Operating Instructions

6.1 How it Works

The lint remover uses an electric motor to drive its sharp blades. A motor-driven fan creates suction, drawing lint and fuzz from the fabric surface onto the knife mesh. The blades then trim these unwanted fibers, which are subsequently sucked into the transparent chip storage bin for easy disposal.

6.2 Using the Lint Remover

  1. Prepare the Fabric: Lay the garment or fabric flat on a hard, smooth surface. Ensure there are no wrinkles or folds that could get caught.
  2. Power On: Press the power button to turn on the device. The digital display will illuminate, showing the current battery percentage.
  3. Apply to Fabric: Gently glide the lint remover over the affected area. Keep the product in slight contact with the surface of the clothing; do not press down with force. Move it in small, circular motions or back and forth.
  4. Monitor Progress: The intelligent digital display allows you to monitor the remaining battery power at any time, ensuring you don't run out of power mid-task.
  5. Power Off: Once finished, press the power button again to turn off the device.
Lint remover in action on a sweater
Figure 6.1: Lint remover in action on a sweater, demonstrating lint removal.
Lint remover held in hand
Figure 6.2: Lint remover held in hand, showing the mesh cover and product label.

7. Maintenance and Cleaning

7.1 Emptying the Lint Collector

Regularly check and empty the transparent lint storage bin. Twist or pull the bin to detach it from the main unit, discard the collected lint, and then reattach it securely.

7.2 Cleaning the Blades and Mesh

  1. Ensure the device is turned off and unplugged.
  2. Carefully remove the net cover (blade guard) by twisting or pulling it off.
  3. Use the provided cleaning brush to gently brush away any lint or debris from the blades and the inside of the net cover. Be cautious as the blades are sharp.
  4. For general cleaning of the machine's body, use a neutral detergent diluted with water. Dip a cloth into the solution and wipe the dirt. Do not use harsh chemicals like banana oil or gasoline, as these can cause plastic deformation or other damage.
  5. Reassemble the net cover and lint collector securely before next use.
Lint remover with lint collection bin removed
Figure 7.1: Lint remover with its lint collection bin removed, showing the internal blade assembly.

7.3 Blade Replacement

The cutter head is a consumable part. Over time, the blade edges may become dull. It is recommended to replace the cutter head when you notice a decrease in performance. Replacement blades may be available from the manufacturer or seller.

8. Troubleshooting

ProblemPossible CauseSolution
Device does not turn onLow battery; Blade guard not properly installed; Power button malfunction.Charge the device fully. Ensure the blade guard is securely clicked into place. If still not working, contact support.
Loses power quickly or performance decreasesInsufficient charge; Battery degradation; Blades are dull or clogged.Ensure the device is fully charged. Clean the blades and mesh. Consider replacing the cutter head if blades are dull. Battery capacity naturally decreases over time.
Not effectively removing lintLint collector is full; Blades are dull or clogged; Incorrect usage.Empty the lint collector. Clean the blades and mesh. Ensure the device is held gently and flat against the fabric.

9. User Tips

  • This lint remover is highly effective on various fabrics, including sweaters, socks, and even mattress covers.
  • The digital display is very useful for monitoring battery life, allowing you to recharge before it runs out.
  • A full charge typically provides about 40 minutes of continuous use, which is sufficient for multiple garments.
  • Its lightweight design and easy-to-clean components make it convenient for regular use.
  • For best results, always lay garments flat and taut before use.

10. Warranty and Support

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or replacement parts, please contact your original retailer or the manufacturer directly. Please retain your proof of purchase for warranty purposes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.