Fydun FGB867074569539

Contents

User Manual: Rubber Bleed Nipple Covers

Model: FGB867074569539

Brand: Fydun

1. Introduction

Thank you for choosing the Fydun Rubber Bleed Nipple Covers. These durable and wearproof caps are designed to protect the bleed nipples and screws on your vehicle's braking and clutch systems, as well as grease nipples and lubrication points on various machines. By preventing dirt, dust, and moisture ingress, they help maintain the integrity and performance of these critical components.

2. Product Overview

The product consists of 10 high-quality rubber caps designed for versatile application across cars, motorcycles, and other machinery. Each cap features a self-gripping seal to ensure a secure fit.

Ten black rubber bleed nipple covers arranged in rows.
Figure 1: Ten black rubber bleed nipple covers.
Close-up side view of a single black rubber bleed nipple cover.
Figure 2: Close-up of a single bleed nipple cover.

3. Specifications

FeatureDetail
Product NameBleed Nipple Covers
Model NumberFGB867074569539
Batch/Serial Number2348544515-941
MaterialRubber
Item TypeNuts & Bolts (Accessory)
Special FeaturesBleeder Screw Caps, Wearproof, Durable
ApplicationCars, Motor Bikes, Machines
Item Weight (per 10 pcs)10g (0.01 kg)
Package Dimensions (approx.)Length: 7 cm, Width: 2 cm, Height: 1 cm
External Testing CertificationCCC
OriginMainland China

4. Setup and Installation

  1. Preparation: Remove all protective packaging materials from the bleed nipple covers.
  2. Clean Surface: Ensure the bleed nipple or screw you intend to cover is clean and free from grease or debris for optimal cap seating.
  3. Installation: Simply place the rubber cap over the bleed nipple, bleed screw, grease nipple, or lubrication point. The self-gripping seal will hold it securely in place. No special tools or complicated procedures are required.
  4. Verification: Gently tug on the cap to ensure it is firmly seated and will not easily dislodge.
A pile of black rubber bleed nipple covers in the foreground, with a motorcycle in the background, illustrating their intended use.
Figure 3: Bleed nipple covers in context with a motorcycle.

5. Operating Instructions

Once installed, the bleed nipple covers operate passively by providing continuous protection against environmental elements. They require no further action during normal use. Periodically check that the caps remain securely in place, especially after vehicle maintenance or exposure to harsh conditions.

6. Maintenance

  • Cleaning: If the caps become dirty, they can be wiped clean with a damp cloth. Avoid using harsh chemicals that may degrade the rubber material.
  • Inspection: Regularly inspect the caps for any signs of wear, cracking, or damage. Damaged caps should be replaced immediately to ensure continued protection.
  • Storage: Store unused bleed nipple covers in a dry place, away from direct sunlight and extreme temperatures, and out of reach of children.

7. Troubleshooting

  • Cap does not stay on: Ensure the bleed nipple or screw is clean and free of obstructions. Verify that the cap size is appropriate for the nipple. If the cap is stretched or damaged, replace it.
  • Cap appears loose: Re-seat the cap firmly. If it continues to be loose, it may be worn or the wrong size; consider replacement.
  • Cap is damaged: If a cap shows signs of tearing, cracking, or hardening, replace it with a new one to maintain effective protection.

8. User Tips

  • The rubber material is designed to be soft and flexible, allowing for a good seal.
  • These caps are commonly used as dust covers for caliper bleed valves.
  • Before purchasing, it is advisable to measure the diameter of your vehicle's bleed nipples to ensure compatibility, as sizes can vary between models and manufacturers (e.g., for a Mercedes Benz C180 1993 model).

9. Compliance Information

  • Warning: Keep small parts out of reach of children under 3 years old to prevent choking hazards.
  • Do not use this product for purposes other than its intended use as a protective cover for nipples and screws.
  • Inspect the product before each use; do not use if damaged.

10. Warranty and Support

For any questions, concerns, or issues regarding your Fydun Rubber Bleed Nipple Covers, please contact the seller or manufacturer directly. Please retain your purchase records for any support inquiries.

© 2024 Fydun. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.