Tronsmart Mirtune C2

Contents

Tronsmart Mirtune C2 Portable Bluetooth Speaker

User Manual

1. Introduction

Thank you for choosing the Tronsmart Mirtune C2 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully before use and keep it for future reference.

Tronsmart Mirtune C2 Portable Bluetooth Speaker with lanyard
Tronsmart Mirtune C2 Portable Bluetooth Speaker

Package Contents

  • Tronsmart Mirtune C2 Portable Bluetooth Speaker
  • Type-C Charging Cable
  • Aux-in Cable
  • Lanyard
  • User Manual (this document and a detailed PDF version)

For a more detailed guide, please refer to the official PDF user manual available at: Tronsmart Mirtune C2 User Manual (PDF)

2. Safety Instructions

  • Do not expose the speaker to extreme temperatures, direct sunlight, or open flames.
  • Do not disassemble, repair, or modify the speaker.
  • Use only the provided or certified charging cables.
  • Keep the speaker away from children and pets.
  • Clean the speaker with a soft, dry cloth. Do not use corrosive cleaners.
  • Ensure the charging port cover is securely closed when using the speaker near water to maintain its IPX7 waterproof rating.

3. Product Layout & Controls

The Tronsmart Mirtune C2 features intuitive controls for easy operation.

Hand holding Tronsmart Mirtune C2 speaker, showing control buttons
Speaker controls are located on the side for easy access.

Button Functions (Typical Layout)

  • Power Button (⏻): Press and hold to power on/off. Short press for play/pause.
  • Volume Up (+): Short press to increase volume. Long press for next track.
  • Volume Down (-): Short press to decrease volume. Long press for previous track.
  • Mode Button (M): Short press to switch between Bluetooth, TF/SD Card, and Aux-in modes.
  • LED Light Button (Δ): Short press to cycle through LED light modes.
  • Bluetooth Pairing Button (☍): Short press to enter Bluetooth pairing mode. Long press to disconnect current Bluetooth device.

Ports

  • Type-C Charging Port: For charging the speaker.
  • Aux-in Port: For wired audio connection.
  • TF/SD Card Slot: For playing music directly from a memory card.

4. Charging the Speaker

Before first use, fully charge the speaker. The Mirtune C2 has a 3.7V/3600mAh battery.

  1. Open the protective cover of the charging port.
  2. Connect the Type-C charging cable to the speaker's Type-C port and the other end to a 5V/1A power adapter (not included).
  3. The LED indicator will show charging status (e.g., red while charging, off when fully charged).
  4. Charging time is approximately 4 hours.
  5. Once fully charged, disconnect the cable and securely close the protective cover to maintain waterproof integrity.

5. Operation

5.1 Power On/Off

  • Power On: Press and hold the Power button (⏻) for 2-3 seconds until you hear an audible prompt and the LED lights activate.
  • Power Off: Press and hold the Power button (⏻) for 2-3 seconds until you hear an audible prompt and the LED lights turn off.

5.2 Bluetooth Pairing

  1. Power on the speaker. It will automatically enter Bluetooth pairing mode (LED indicator will flash blue).
  2. Enable Bluetooth on your device (smartphone, tablet, etc.).
  3. Search for 'Tronsmart Mirtune C2' in your device's Bluetooth list and select it to connect.
  4. Once connected, you will hear an audible prompt, and the LED indicator will remain solid blue.
  5. The speaker will automatically reconnect to the last paired device when powered on, if within range.

5.3 True Wireless Stereo (TWS) Pairing

You can pair two Mirtune C2 speakers together for a true wireless stereo experience.

Two Tronsmart Mirtune C2 speakers paired for True Wireless Stereo
Enjoy superior stereo sound with TWS pairing.
  1. Ensure both Mirtune C2 speakers are powered on and not connected to any Bluetooth device.
  2. On one speaker (this will be the primary speaker), short press the Bluetooth Pairing button (☍) twice. It will enter TWS pairing mode.
  3. The two speakers will automatically search for and pair with each other. You will hear an audible prompt once connected.
  4. Once TWS paired, the primary speaker's LED will flash blue, and the secondary speaker's LED will be solid blue.
  5. Now, connect your device to the primary speaker via Bluetooth as described in section 5.2.
  6. To disconnect TWS, short press the Bluetooth Pairing button (☍) twice on either speaker.

5.4 Playing Music

  • Bluetooth Mode: After successful pairing, play music from your connected device.
  • TF/SD Card Mode: Insert a TF/SD card (up to 128GB, FAT32 format) with music files into the card slot. The speaker will automatically switch to TF/SD card mode and start playing. If not, short press the Mode button (M).
  • Aux-in Mode: Connect your audio device to the speaker's Aux-in port using the provided 3.5mm audio cable. The speaker will automatically switch to Aux-in mode. If not, short press the Mode button (M).

5.5 Volume Control

  • Increase Volume: Short press the Volume Up (+) button.
  • Decrease Volume: Short press the Volume Down (-) button.

5.6 LED Light Modes

The Mirtune C2 features customizable LED lights that sync with music.

Close-up of Tronsmart Mirtune C2 speaker showing customizable LED light rings
Customize the vibrant LED lights to match your mood.
  • Short press the LED Light button (Δ) to cycle through different light modes or turn them off.

5.7 Answering Calls

With the built-in microphone, you can answer calls directly through the speaker when connected via Bluetooth.

  • Answer/End Call: Short press the Power button (⏻).
  • Reject Call: Long press the Power button (⏻).

6. Maintenance

6.1 Waterproof Care (IPX7)

The Mirtune C2 is IPX7 waterproof, meaning it can be submerged in water up to 1 meter for 30 minutes. To ensure its waterproof integrity:

Tronsmart Mirtune C2 speaker being splashed with water, demonstrating IPX7 waterproof rating
The IPX7 rating allows for worry-free use near water.
  • Always ensure the rubber cover for the charging and Aux-in ports is securely sealed before exposing the speaker to water.
  • Do not expose the speaker to saltwater or other chemicals.
  • After exposure to water, wipe the speaker dry with a soft cloth before charging.

6.2 Cleaning and Storage

  • Clean the speaker with a soft, lint-free cloth.
  • Do not use abrasive cleaners, alcohol, or chemical solvents.
  • Store the speaker in a cool, dry place away from extreme temperatures.
  • If not used for a long period, charge the battery at least once every three months to prolong its lifespan.

7. Troubleshooting

Problem Possible Cause Solution
Speaker does not power on. Low battery. Charge the speaker fully.
Cannot pair via Bluetooth. Speaker not in pairing mode; device Bluetooth off; too far from device. Ensure speaker is in pairing mode (flashing blue LED). Turn device Bluetooth on/off. Move speaker closer to device (within 15m).
No sound. Volume too low; incorrect mode; device not playing. Increase speaker and device volume. Press 'M' button to switch modes. Ensure music is playing on your device.
TWS pairing fails. Speakers already connected to other devices; too far apart. Ensure both speakers are disconnected from other devices. Place speakers within 10m of each other. Try re-initiating TWS pairing.
Sound distortion. Volume too high; low battery; interference. Reduce volume. Charge speaker. Move away from other electronic devices.

8. Specifications

Feature Detail
Brand NameTronsmart
Internal ModelTronsmart Mirtune C2
Speaker TypePortable
CommunicationBluetooth, Aux-in, TF/SD Card
Bluetooth VersionV5.3
Bluetooth ProfileA2DP/AVRCP/HFP/HSP
Bluetooth RangeUp to 15m/49ft (open area)
Stereo Pairing Range10m
Output Power24W
PMPO20W
Frequency Range60Hz-2.2KHz
Audio CrossoverFull-Range
Number of Loudspeaker Enclosure1
Channels2 (2.0)
Battery Capacity3.7V/3600mAh
Input Power5V/1A, via Type-C port
Charging Time4 Hours
PlaytimeUp to 24 Hours (LED Off, 50% Volume)
Waterproof RatingIPX7
Built-in MicrophoneYes
360° Surround SoundYes
LED ModeYes
Support Memory CardYes
MaterialPlastic (Cabinet Material)
Dimensions (W x H x D)210mm x 97mm x 97mm
Weight610g
CertificationsCE, FCC, RoHS

9. User Tips

  • Optimal Sound: For the best audio experience, ensure the speaker is placed on a stable surface and not obstructed. The 360° surround sound design allows for flexible placement.
  • Battery Life: To maximize battery life, consider turning off the LED lights when not needed, as they consume power.
  • Frequency Response: The speaker offers a frequency range of 60Hz-2.2KHz, providing rich bass and clear highs for various music genres.
  • Power Output: With 24W of power, the Mirtune C2 delivers robust sound suitable for outdoor use and small gatherings.

10. Warranty & Support

Tronsmart products are designed and manufactured to the highest quality standards. In the unlikely event of a problem with your product, please contact the seller or Tronsmart customer support for assistance.

Please retain your proof of purchase for warranty claims. The warranty period and terms may vary by region and retailer.

For further support and detailed information, please refer to the comprehensive user manual PDF: Tronsmart Mirtune C2 User Manual (PDF)

© 2023 Tronsmart. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.