ULTIMEA Nova S80

Contents

ULTIMEA Nova S80 5.1.2 Channel Dolby Atmos Soundbar User Manual

Model No.: U4120

Experience immersive audio with Dolby Atmos, 4K HDR Pass-through, and wireless surround sound.

Introduction

Thank you for purchasing the ULTIMEA Nova S80 5.1.2 Channel Dolby Atmos Soundbar. This manual provides detailed instructions for setting up, operating, and maintaining your soundbar system to ensure optimal performance and an immersive home theater experience. Please read this manual thoroughly before use and keep it for future reference.

ULTIMEA Nova S80 Soundbar system with subwoofer and two surround speakers

Figure 1: ULTIMEA Nova S80 5.1.2 Channel Dolby Atmos Soundbar System

Video 1: ULTIMEA Nova S80 Product Overview

Safety Instructions

Please read this user manual carefully and save it for future reference. Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

  • Avoid dropping the device.
  • Do not disassemble the product.
  • Do not submerge the device in water.
  • Avoid extreme temperatures.
  • Do not use the device outdoors during thunderstorms.
  • Use original or certified cables.
  • Do not place dangerous items on top of this device (e.g., liquid-filled objects, lit candles).
  • Clean with a dry, soft, lint-free cloth. Do not use any corrosive cleaner or oil.
  • To avoid hearing damage, do not listen for extended periods at high volume.
  • Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
  • The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
  • The adapter should be installed near the device and should be easily accessible.
  • Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

Setup

1. Accessories List

Ensure all the following accessories are included in your package:

  • Soundbar (2 parts)
  • Subwoofer (1)
  • Surround Speakers (2)
  • Power Adaptor (1)
  • Subwoofer Power Cable (1)
  • Stereo RCA to RCA Audio Cable (6m) (1)
  • HDMI Cable (1)
  • HDMI Adaptor (1)
  • Digital Optical Cable (1)
  • Stereo 3.5mm to RCA Audio Cable (1)
  • 6-pin Cable for Soundbar Connection (140mm) (1)
  • Remote Control (1)
  • Wall Mounted Kit (1)
  • Wall Bracket (1)
  • User Manual (1)
Diagram of all accessories included with the ULTIMEA Nova S80 soundbar system

Figure 2: Included Accessories

2. Soundbar Assembly

  1. Step 1: Set the two parts of the Soundbar on the same level and align the connection joints. Connect the two parts by pushing parallelly to combine as one piece.
  2. Step 2: Plug in the 6-pin Cable to secure the connection between the two soundbar halves.
Diagram showing how to assemble the two parts of the soundbar and connect them with a 6-pin cable

Figure 3: Soundbar Assembly

3. Connecting to TV via HDMI OUT eARC / ARC

Make sure your TV HDMI supports eARC, otherwise the Dolby Atmos audio signal cannot be transmitted.

  1. Step 1: Connect one end of the HDMI cable to the eARC / ARC port on the back of your TV.
  2. Step 2: Then connect the other end into the HDMI OUT (ARC) port of the soundbar.
  3. Step 3: Press the "eARC" button on the remote control to select "HDMI OUT (ARC)" input.

Note on Audio Output:

  • For Dolby Atmos: If you are watching a movie in the Dolby Atmos format, please set the audio output on your TV to Pass Through (TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through).
  • For DTS: If you are watching a movie in the DTS format, please set the audio output on your TV to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).

Note: Please turn on the "CEC" function on your TV. When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously (Turn on/off, Adjust the volume).

4. Connecting to Other Devices via HDMI IN

Use this connection for devices like DVD players or game consoles.

  1. Step 1: Connect the HDMI Cable to the HDMI OUT (ARC) port on the Soundbar and the other end to the eARC / ARC port on the TV.
  2. Step 2: Connect the HDMI cable to the HDMI OUT port on the other device (Such as DVD or game console) and the other end to HDMI IN port on the Soundbar.
  3. Step 3: Press the "INPUT" button on the Soundbar or Remote Control to switch to HDMI IN channel.

5. Connecting to TV via Optical / AUX

Option 1: Optical Connection

  1. Make sure the cable is connected to the OPTICAL OUT port on your TV, and the other end to the OPTICAL port on the Soundbar.
  2. Make sure the optical plug is inserted correctly as shown in the picture. Do not insert the plug upside down and break the optical.

Note: If audio is coming from the internal TV speakers, mute or minimize the TV volume. In Optical Mode: If there is no sound, try setting the TV audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).

Option 2: AUX Connection

  1. Connect the 3.5mm to RCA audio cable to connect to your TV's RCA AUDIO OUT port.
  2. Make sure the color of the cable ends matches the color of the TV ports.

Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch to other modes.

6. Connecting to Bluetooth

  1. Press the "BT" button on the soundbar or remote control to enter Bluetooth pairing mode.
  2. Open your phone's Bluetooth settings, find and select "Nova S80" to connect the soundbar.

Note: If it's already in Bluetooth mode and connected, press and hold the "BT" button for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone/PC/TV.

7. Connecting to Subwoofer and Surround Speakers

  1. Use the 6m RCA-RCA cables to connect the subwoofer and surround speakers. Pay attention to match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer and place the surround speakers accordingly.
  2. Use the power cable to connect your subwoofer and power port.

8. Pairing Subwoofer

The subwoofer is automatically paired with the soundbar by ULTIMEA. If there is no sound from the subwoofer, you need to re-pair it.

  1. Step 1: Press and hold the "BASS MX" button on the remote control for 5 seconds; the display will show "SUB" flashing.
  2. Step 2: Press and hold the PAIR button on the subwoofer for 5 seconds; the white LED will be fast flashing. The white LED will be always on when the subwoofer is paired successfully.

9. Placement Options

For a better listening experience, choose one of the two placement options based on your home environment. The soundbar and surround speakers should be placed at or near ear level.

Diagram showing full 360 degree surround sound placement for the ULTIMEA Nova S80

Figure 4: Full 360° Surround Placement (Better Surround)

Diagram showing front surround sound placement for the ULTIMEA Nova S80

Figure 5: Front Surround Placement

10. Wall Mount Installation

Use the provided wall-mounted kit and wall brackets for installation. Please use the HDMI Adaptor for easy plugging and unplugging of the HDMI Cable.

Diagram showing steps for wall mounting the soundbar and surround speakers

Figure 6: Wall Mount Installation Steps

Operating Instructions

1. Soundbar Control Panel

  • Power Button: Press to power on/off.
  • Input Mode: Press to switch channels: eARC-HD IN (HDMI IN)-OPT (OPTICAL)-BT-AUX-USB.
  • BT: Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone/PC/TV (BT ID: Nova S80).
  • Volume Down (-): Decreases volume.
  • Volume Up (+): Increases volume.

2. Remote Control Functions

  • Power Button: Press to power on/off.
  • eARC: Press to switch to HDMI eARC channel.
  • HD IN: Press to switch to HDMI IN channel.
  • OPT: Press to switch to OPTICAL channel.
  • BT: Press to switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect current device and connect to a new device manually on your mobile phone/PC/TV (BT ID: Nova S80).
  • EQ: Press to switch among Movie, Dialogue, Music mode. The display will show: "MOVI", "BLOG", "MUSC".
  • INPUT: Press to switch channels: eARC-HD IN (HDMI IN)-OPT (OPTICAL)-BT-AUX-USB.
  • Volume Up (+): Increases volume.
  • Volume Down (-): Decreases volume.
  • Previous (<): For BT and USB mode only: Skip to previous track.
  • Next (>): For BT and USB mode only: Skip to next track.
  • Play / Pause (▷II): For BT and USB mode only. USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback.
  • Dolby ATMOS: Press to adjust upward-firing sound level. The display will show: "AT-I", "AT O", "AT I".
  • SURROUND: Press to adjust surround sound level. The display will show: "SR-c", "SR-I", "SR O", "SR I".
  • BASS MX: Press to adjust bass level. The display will show: "B5-4", "B5-3", "B5-2", "B5-1", "B5 0", "B5 1", "B5 2", "B5 3", "B5 4".
  • Mute: Mute / Recover the volume.

Maintenance

To ensure the longevity and optimal performance of your ULTIMEA Nova S80 soundbar system, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry, lint-free cloth to clean the surfaces of the soundbar, subwoofer, and surround speakers. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
  • Ventilation: Ensure that the soundbar and subwoofer have adequate ventilation. Do not block any ventilation openings.
  • Storage: If storing the device for an extended period, ensure it is powered off and disconnected from the power source. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Management: Periodically check all cables for any signs of wear or damage. Replace any damaged cables immediately to prevent potential issues.

Troubleshooting

If you encounter any issues with your ULTIMEA Nova S80, please refer to the following common solutions:

  • No Sound from Subwoofer: If there is no sound coming from the subwoofer, re-pair the soundbar with the subwoofer following the steps in the "Pairing Subwoofer" section.
  • No Sound in Optical Mode: Ensure your TV's audio output is set to PCM. Navigate to TV Settings > Home > Settings > Sound > Digital Audio Output > PCM.
  • No Sound from PC (intermittent): If you experience intermittent loss of sound when connected to a PC, try re-establishing the connection or checking the PC's audio output settings.
  • Remote Control Not Responding: Ensure there is a clear line of sight between the remote control and the soundbar, as it uses infrared (IR) technology. Check and replace batteries if necessary.
  • Bluetooth Connection Issues: If you cannot connect a new Bluetooth device, ensure the previous device is disconnected from the soundbar's Bluetooth settings.
  • Dolby Atmos/DTS Not Working: Verify that your TV's HDMI port supports eARC and that the TV's audio output is set to "Pass Through" for Dolby Atmos or "PCM" for DTS, as described in the "Connecting to TV via HDMI OUT eARC / ARC" section.

Specifications

Feature Specification
Model NumberU4120
Power SupplyAC 100-240V, ~50/60Hz
Soundbar Drivers(3.1" x 1.2") x 3 (Soundbar) + 1.8" x 2 (upward-firing Driver) + (3.1" x 1.2") x 2 (Surround Speaker) + 8" (Subwoofer)
Frequency Response35Hz - 18kHz
Standby Power<0.5W
Operating Temperature0°C - 45°C / 32°F - 113°F
Bluetooth Version5.3
Soundbar Dimensions (W x H x D)800(W) x 38(H) x 90(D)mm (31.5" x 1.5" x 3.5")
Subwoofer Dimensions (W x H x D)315(W) x 385(H) x 190(D)mm (12.4" x 15.2" x 7.5")
Surround Speaker Dimensions (W x H x D)150(W) x 38(H) x 82(D)mm (5.9" x 1.5" x 3.2")
Packaging Dimensions (W x H x D)472(W) x 306(H) x 430(D)mm (15.6" x 12" x 16.9")
Net Weight6.7kg / 14.77lbs
Gross Weight8.94kg / 19.71lbs

User Tips

  • Wireless Subwoofer Placement: The wireless subwoofer offers flexibility in placement, as it only requires an AC power socket, reducing cable clutter.
  • Bluetooth Device Switching: When switching between multiple Bluetooth devices, remember to manually disconnect the currently paired device from its settings before attempting to connect a new one.
  • Remote Control: The remote uses IR (infrared) technology, requiring a clear line of sight to the soundbar for optimal functionality.
  • Sound Modes & Bass Adjustment: Experiment with the various sound modes (Movie, Dialogue, Music) and the 13 levels of bass adjustment to find your preferred audio profile for different content.

Warranty and Support

For any support needs, kindly reach out to our service team. We are always glad to help.

  • US Support: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
  • EU Support: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
  • Email Support: support@ultimea.com

You can also find setup guidance videos, the user manual, and troubleshooting information on the ULTIMEA website.

This device complies with Part 15 of the FCC Rules and relevant ISED standards. Operation is subject to specific conditions to prevent harmful interference.

© 2023 ULTIMEA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.