SEAMETAL C42778

Contents

SEAMETAL Car USB Dual Head Cooling Fan

Model: C42778 (F310)

Product Manual - Revised: 2505

Introduction

Thank you for purchasing the SEAMETAL Car USB Dual Head Cooling Fan. This manual provides essential information for the safe and efficient operation of your new car fan. Please read these instructions carefully before use and retain them for future reference.

SEAMETAL Car USB Dual Head Cooling Fan installed on a car headrest
The SEAMETAL Car USB Dual Head Cooling Fan provides adjustable airflow for rear seat passengers.

Safety Information

  • Ensure the fan is securely installed before driving.
  • Do not obstruct the fan blades or vents during operation.
  • Keep out of reach of small children to prevent injury.
  • Do not expose the fan to water or excessive moisture.
  • Use only with a compatible DC 5V 2A USB power source.
  • Disconnect power when not in use or before cleaning.

Package Contents

The package includes:

  • 1 x SEAMETAL Car USB Dual Head Cooling Fan (Model C42778)
  • 1 x USB-A to Type-C Power Cable
Contents of the SEAMETAL Car USB Dual Head Cooling Fan package, showing the fan unit and USB cable.
The fan unit and its accompanying USB power cable.

Specifications

Feature Specification
Model Name C42778 (F310)
Brand Name SEAMETAL
Item Type Car Cooling Fan
Material ABS/PP/Electronic Components
Input Voltage DC 5V 2A
Rated Power ≤10W
Power Supply USB Plug (USB-A to Type-C cable)
Special Features Independent switch for each fan, 3-speed cooling, 2-position light brightness
Item Diameter (Fan) 9.5 cm / 3.74 in
Total Length 56 cm / 22.04 in
Item Weight 0.38 kg
Installation Between headrest poles
Diagram showing the dimensions of the SEAMETAL Car USB Dual Head Cooling Fan.
Product dimensions for reference.
Diagram illustrating the pure copper motor of the vehicle fan, highlighting its stable performance and low noise.
The fan features a Type-C power supply and a low-noise pure copper motor for stable performance.

Setup and Installation

The fan is designed for easy installation between the headrest poles of your car seats.

  1. Attach First Clamp: Place one end of the spring clamp onto one of the seat headrest bars. Ensure it is securely positioned.

    Step 1 of installation: Placing one side of the spring clamp onto a car seat headrest bar.
    Place one side of the spring clamp onto the seat headrest bar.
  2. Attach Second Clamp: Push the other side of the fan unit until the second spring clamp snaps onto the other headrest bar. The fan should now be securely mounted between the headrest poles.

  3. Connect Power: Connect the provided USB-A to Type-C cable to the fan's power input and then to a compatible USB power port in your vehicle (e.g., car charger, USB port). The fan requires a DC 5V 2A power source.

    Video demonstrating the installation and operation of the SEAMETAL Car USB Dual Head Cooling Fan.

Operating Instructions

Once installed and powered, you can operate the fan using the buttons located on the central unit:

  • Wind Speed Button: Each fan has an independent wind speed button. Press the button to cycle through the 3-speed settings:

    1. Soft Wind: Gentle breeze, comparable to a hand-cranked fan.
    2. Refreshing Wind: A cool breeze to the face.
    3. Strong Wind: Instantly drives away heat.
  • Lighting Button: The central unit features a light. Press the lighting button to adjust its brightness between two positions or turn it off.

Diagram illustrating the three wind speed settings: Soft, Refreshing, and Strong.
Three distinct wind speed settings for personalized comfort.
Image showing the two-position light brightness feature on the fan's central unit.
The central unit includes a light with two brightness settings.

Maintenance

  • Cleaning: Use a soft, dry cloth to wipe the fan's exterior. Do not use abrasive cleaners or immerse the unit in water.
  • Storage: When not in use for extended periods, disconnect the fan from power and store it in a cool, dry place.
  • Inspection: Periodically check the power cable for any signs of damage. If damaged, discontinue use and replace the cable.

Troubleshooting

Fan is not turning on:
Ensure the USB cable is securely connected to both the fan and a working DC 5V 2A USB power source. Check if your car's ignition is on, as the fan is USB powered and does not have a built-in battery.
Weak airflow:
Check the selected speed setting. Cycle through the 3 speeds using the independent speed buttons. Ensure there are no obstructions blocking the fan blades or air intake/output.
Unusual noise during operation:
Ensure the fan is securely mounted and not vibrating against the headrest poles. Check for any foreign objects caught in the fan blades. While some operational noise is normal, excessive or unusual noise may indicate an issue.
Light is not working:
Press the lighting button to cycle through its two brightness settings and off. Ensure the fan is receiving power.

User Tips

  • The fan's 360-degree adjustability allows you to direct airflow precisely where needed for rear seat passengers.
  • The independent switches for each fan head allow for customized comfort for different passengers.
  • Even the first speed setting can provide significant cooling, especially in smaller vehicles.
  • Consider using the fan in conjunction with your car's air conditioning for enhanced cooling efficiency.

Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.