1. Introduction
Thank you for choosing the CETANT LED Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new wall lamp. Please read these instructions carefully before installation and keep them for future reference.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Always cut off the main power supply or close the main breaker before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not install the lamp in flammable or humid locations.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Use only the specified voltage range (85V-265V AC) for this product.
- Do not attempt to modify the lamp in any way.
- Keep the lamp away from water and other liquids.
3. Package Contents
Please check that all parts are present and undamaged:
- LED Wall Lamp fixture
- Mounting bracket
- Screws and wall plugs
- Remote control (for models with remote control functionality)
- User Manual (this document)
4. Specifications
| Feature | Description |
|---|---|
| Model Number | PL230 |
| Brand Name | CETANT |
| Item Type | Wall Lamps |
| Working Power | 22W |
| Operating Voltage | 85V-265V AC (90-260V, 110V, 220V compatible) |
| Light Source | LED bulbs |
| Luminous Flux | 249-2000 lumens |
| Material | Metal (Wrought iron + Acrylic) |
| Shade Type | IRON |
| Shade Direction | Up & Down |
| Installation Type | Wall Mounted, Self-Contained |
| Lighting Area | 10-15 square meters |
| Features | Minimalist LED Strip Wall Lamp, Intelligent LED light source |
| Is Dimmable | Yes (Stepless dimming for remote control models) |
| Switch Type | REMOTE CONTROL (for applicable models) |
| Is Smart Device | Yes |
| Certification | CCC, CE, PSE, ROHS |
| Warranty | 2 years |
| Package Length | 50 cm |
| Package Width | 20 cm |
| Package Height | 10 cm |
| Package Weight | 1.2 kg |
Available in 60cm and 80cm lengths, and colors White, Gold, and Black. Light temperature options include Warm Light (no remote control) and Remote Control (dimmable with adjustable color temperature).
5. Installation Instructions
Important: Ensure the power is OFF at the main circuit breaker before beginning installation. This lamp is designed for wall-mounted, hardwired installation and is not a plug-in device.
Diagram: Detailed installation steps and product parameters for the wall lamp, showing drilling, wiring, and mounting.
Installation Procedure:
- Prepare the Mounting Area: Use a screwdriver to secure the lamp's mounting panel to the wall.
- Mark Drilling Points: Determine the desired position for the lamp on the wall. Mark the locations where holes need to be drilled for the mounting bracket.
- Drill Holes: Confirm the installation area and carefully drill the marked holes.
- Insert Wall Plugs: After drilling, gently push the rubber wall plugs into the holes. If necessary, tap them with a hammer until flush with the wall.
- Mount the Bracket: Use a screwdriver to securely fix the mounting bracket (pendant) to the wall using the provided screws.
- Wire Connections: With the power still OFF, connect the live wire, ground wire, and neutral wire from your electrical supply to the corresponding wires on the lamp's connector. Ensure all connections are secure.
- Secure the Lamp: Carefully position the lamp fixture onto the mounted bracket.
- Final Tightening: Tighten all screws to firmly fix the lamp on the wall.
Once installation is complete, restore power at the main circuit breaker.
6. Operating Instructions
Power On/Off:
Once installed and wired, the lamp can be turned on and off using your wall switch.
Remote Control Models (Stepless Dimming):
For models equipped with a remote control, you can adjust the light's brightness and color temperature. The remote allows for stepless dimming, offering a range of light colors to suit different scenarios.
Diagram: Stepless dimming feature showing 6000K (bright eye protection), 4000K (bright and refreshing), and 3000K (soft and warm) light temperatures.
- Brightness Adjustment: Use the designated buttons on the remote to increase or decrease the light intensity.
- Color Temperature Adjustment: Use the remote to cycle through or select specific color temperatures, typically ranging from cool white (e.g., 6000K for bright eye protection) to neutral white (e.g., 4000K for bright and refreshing) to warm white (e.g., 3000K for soft and warm).
Warm Light Models (No Remote Control):
These models provide a fixed warm light color temperature and do not include remote control functionality or dimming capabilities. They operate solely via the wall switch.
Image: Close-up view of the intelligent LED light source, highlighting its high color rendering and comfortable, non-stimulating light.
7. Maintenance
To maintain the appearance and performance of your LED Wall Lamp:
- Cleaning: Ensure the power is off before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Bulb Replacement: The LED bulbs are integrated and not user-replaceable. If the light source fails, the entire fixture may need to be replaced.
- Inspection: Periodically check for any loose connections or signs of damage. If any issues are found, disconnect power and consult a qualified electrician.
8. Troubleshooting
If you encounter any issues with your LED Wall Lamp, please refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up |
|
|
| Remote control not working |
|
|
| Light flickers or dims unexpectedly |
|
|
If the problem persists after trying these solutions, please contact customer support.
9. User Tips
- Many users appreciate the