1. Introduction
Thank you for purchasing the Hippcron 1 Din Car Radio Stereo MP3 Player. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new car stereo. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage due to incorrect operation.
2. Safety Information
- Ensure the car battery is disconnected before starting any installation work to prevent short circuits.
- Always use the correct voltage (12V or 24V as specified for your unit) and ensure wiring is correct to avoid damage.
- Do not allow speaker wires to touch each other or the car body/ground, as this can damage the amplifier.
- Use fuses of the specified rating only.
- If you experience any issues not covered in this manual, consult a professional technician.
3. Package Contents
Please check the package for the following items:
- Hippcron Car Radio Stereo Unit (Model 520)
- Power and Speaker Wiring Harnesses (2 sets)
- Remote Control (Steering Wheel Remote or Standard IR Remote, depending on package)
- Disassembly Keys (2)
- User Manual (PDF, refer to the provided PDF for full details)
4. Product Overview
4.1. Front Panel
- POWER Button: Press to turn the unit On or Off.
- / Buttons: Radio tuning up/down, track selection (previous/next), fast forward/rewind.
- EQ/LOUD Button: Select sound effects (EQ presets) and activate/deactivate loudness.
- AMS Button: Automatically search and store radio stations.
- Numeric Keys (1-6): For direct track selection, play/pause, browse play, loop play, random play, and folder selection.
- SD Card Slot: Insert TF/SD cards for media playback.
- AUX Input: 3.5mm jack for external audio devices.
- USB Port: Connect USB drives for media playback.
- CLK Button: Press to display time; long press to enter time adjustment mode.
- IR Receiver: For remote control signals.
- BAND Button: Select radio bands (FM1, FM2, FM3).
- MODE Button: Switch between Radio, USB, SD, AUX, and Bluetooth modes.
- VOL Knob: Rotate to adjust volume. Press to access sound settings (Bass, Treble, Balance, Fader).
4.2. Rear Panel (ISO Interface)
- Antenna Input: Connect your car's FM antenna.
- RCA Outputs: Left Speaker Output (White) and Right Speaker Output (Red) for external amplifiers.
- Power/Speaker Connector: Multi-pin connector for power supply and speaker connections.
4.3. Steering Wheel Remote Control
The steering wheel remote control provides convenient access to common functions such as volume adjustment, track selection, mode switching, and mute without taking your hands off the steering wheel. Refer to the PDF manual for a detailed button layout of the remote control.
5. Setup and Installation
5.1. Important Notes Before Installation
- The wiring arrangement varies between products; do not use the original car plug directly.
- Always use a multimeter to verify car wiring before connecting.
- Ensure your unit's voltage (12V or 24V) matches your car's electrical system. A 12V unit cannot be connected to a 24V system.
- For high-power units, speaker wires must NOT be grounded to the car body. Grounding can cause no sound and excessive heat.
- Ensure all wiring connections are secure and insulated to prevent short circuits.
5.2. Mounting the Unit
- Insert the metal mounting sleeve into the dashboard opening.
- Bend the tabs on the sleeve outward with a screwdriver to secure it firmly in place.
- If necessary, use the provided rear support strap to secure the back of the unit.
- To remove the unit, insert the disassembly keys into the slots on both sides of the unit and pull it out.
5.3. Wiring Diagram
Proper wiring is crucial for the correct operation of your car stereo. Refer to the diagram below and the detailed instructions:
Power Connection:
- Yellow Wire (Memory B+): Connect to constant 12V positive power (always live) for memory retention. This wire has a 15A fuse.
- Red Wire (ACC): Connect to switched 12V positive power (ignition switch controlled).
- Black Wire (Ground B-): Connect to a good chassis ground point in your vehicle.
Speaker Connection (4-8 Ohm Speakers):
- White: Front Left Speaker (+)
- White/Black: Front Left Speaker (-)
- Grey: Front Right Speaker (+)
- Grey/Black: Front Right Speaker (-)
- Green: Rear Left Speaker (+)
- Green/Black: Rear Left Speaker (-)
- Violet: Rear Right Speaker (+)
- Violet/Black: Rear Right Speaker (-)
CAUTION: Ensure speaker wires do not touch each other or the car chassis/ground. Incorrect wiring can damage the amplifier.
6. Operating Instructions
6.1. Basic Operations
- Power On/Off: Press the POWER button.
- Volume Adjustment: Rotate the VOL knob.
- Mode Selection: Press the MODE button to cycle through Radio, USB, SD, AUX, and Bluetooth modes.
- Sound Settings: Press the VOL knob to access Bass, Treble, Balance, and Fader settings. Rotate the knob to adjust values.
6.2. Radio Tuner (FM)
- Frequency Range: 87.5-108.0 MHz.
- Band Selection: Press the BAND button to switch between FM1, FM2, and FM3.
- Automatic Search & Store (AMS): Press the AMS button to automatically search for and store strong stations.
- Manual Tuning: Use the / buttons to manually tune to desired frequencies.
6.3. Media Playback (USB/TF Card/AUX)
- USB/TF Card: Insert a USB drive into the USB port or a TF/SD card into the SD card slot. The unit will automatically switch to USB/SD mode and begin playback. Use / buttons for track selection.
- AUX Input: Connect an external audio device (e.g., smartphone, MP3 player) to the 3.5mm AUX input jack. Select AUX mode using the MODE button.
6.4. Bluetooth Function
- Pairing: Switch the unit to Bluetooth mode (BT) using the MODE button. On your mobile device, search for Bluetooth devices and select