1. Product Overview
The NYXI Wizard Wireless Joy-pad is a high-performance controller designed to enhance your gaming experience on Nintendo Switch consoles. Featuring a GameCube-inspired design, Hall Effect joysticks, and customizable buttons, it offers precision and comfort for extended gameplay.
The NYXI Wizard Wireless Joy-pad, showcasing its GameCube-inspired design and button layout.
Key Features:
- Wireless Connectivity
- 6-Axis Gyro for precise motion control
- Turbo Function with adjustable speed
- Dual Shock Vibration for immersive feedback
- Customizable Map Buttons
- Indicator Lights for status updates
- Hall Effect Joysticks to prevent drift
- Mecha-Tactile Trigger Buttons with short travel distance (0.3mm)
- Illuminated ABXY Buttons with adjustable brightness
An overview of the controller's main features: Wireless connectivity, 6-Axis Gyro, Turbo function, Dual Shock vibration, Map Button for customization, and Indicator Lights.
2. Package Contents
Please check the package carefully to ensure all items are present:
- Left-hand handle: 1
- Right-hand handle: 1
- Charging cable: 1
- User Manual: 1
- Intermediate bridge: 1
- Round replacement rocker ring: 2
3. Specifications
| Feature | Specification |
|---|---|
| Material | ABS |
| Battery | Built-in 500mAh lithium battery (single-sided) |
| Charging Input | 5V 1A |
| Charging Time | Approximately 3 hours |
| Use Time | Approximately 8 hours |
| Wireless Distance | Up to 10 meters |
| Hall Effect | Yes |
| Joystick Sensor Module | K-SLIVER |
| Trigger Button Type | Linear |
| Interface Type | USB |
| Product Type | Gamepads |
| Package Dimensions (L x W x H) | 19 cm x 18 cm x 11 cm |
| Package Weight | 0.735 kg |
4. Setup and Connection
4.1 Product Schematic
Familiarize yourself with the button layout and components of the NYXI Wizard Joy-pad:
Detailed schematic of the left and right joy-pads, labeling all buttons and features such as the TURBO indicator, FL/FR indicators, 3D rings, Capture Button, Profile Button, Sticks, Directional Buttons, and Type-C ports.
An illustration of the top of the joy-pad, indicating the R, L, ZR, ZL, FR, and FL buttons.
4.2 Charging Instructions
- When the joy-pad is powered off and charging, the LED indicators will flash. They will turn off once fully charged.
- During wireless connection, if the joy-pad is charging, the corresponding channel light will flash slowly. It will remain steadily lit when fully charged.
- The joy-pad can be installed on the Nintendo Switch console and charged via the console's power adapter. If the console is not connected to a power adapter, it will charge the joy-pad only when the joy-pad's voltage is below 3.7V.
- A low battery alarm will trigger when the joy-pad's battery voltage drops below 3.3V, indicated by the corresponding channel light flashing. Please charge the joy-pad promptly.
4.3 Connection Methods
Wired Direct Connection:
Simply slide the left and right joy-pads onto the sides of your Nintendo Switch console until they click into place. The console will automatically recognize them.
Visual guide for connecting the joy-pad directly to the Nintendo Switch console.
Wireless Connection:
- On your Nintendo Switch console, navigate to the HOME Menu.
- Select 'Controllers' > 'Change Grip/Order'.
- On the NYXI Wizard Joy-pad, long-press the SYNC button. The four channel lights will flash.
- The joy-pad will automatically connect to the console.
Visual guide for establishing a wireless connection between the joy-pad and the Nintendo Switch console.
4.4 Wake Up Function
To wake up the joy-pad and enter pairing state, press any button except L3, R3, TURBO, Profile, FL, or FR. Ensure you do not touch the 3D joystick during the connection process to avoid calibration issues.
5. Operating Instructions
5.1 Turbo and Speed Adjustment
The joy-pads have a memory function, retaining settings unless factory settings are restored.
Setting Mode:
- Press TURBO + any settable function button (UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR).
Continuous Mode:
- Press TURBO + button once for manual continuous fire.
- Press TURBO + button twice for automatic continuous fire.
- Press TURBO + button three times to turn off continuous fire.
- Long press TURBO for three seconds to cancel the burst function for all buttons.
Turbo Speed Adjustment:
- Left-hand grip: Press TURBO + - (decrease speed) or + (increase speed).
- Right-hand grip: Press TURBO + - (decrease speed) or + (increase speed).
- Available speeds: 5HZ, 12HZ (default), 20HZ.
Turbo Setting Indicator:
- LED is white when no Turbo setting is active.
- LED turns blue after a Turbo setting is applied.
- Blue light flashes at the set burst speed when bursting.
5.2 Back-Button Mapping and Macro Programming
Ensure the handle is connected and continuous turbo mode is canceled before setting.
LED indicators on the top of the joy-pad, used for displaying burst mode and back button programming status.
Back Button Mapping Setting Method:
- Left Side: Press Profile + any settable button on the left (UP, DOWN, LEFT, RIGHT, L, ZL, L3, VRL) + Profile.
- Right Side: Press Profile + any settable button on the right (A, B, X, Y, R, ZR, R3, VRR) + Profile.
Back-Button Macro Programming:
The FL and FR buttons can record up to 21 button values. The output will follow the time interval of the entry.
Back Button Setting Indicator:
- The profile setting LED will flash from white to blue the first time you press it.
- After the setting is complete, the profile indicator will remain steadily blue.
Back Button Clear:
When connected to the host, hold both the left and right handle Profile buttons for 3 seconds. The original functions set on the FL and FR buttons will be cleared, and the LED will turn to a long white light.
5.3 Motor Vibration Adjustment
Adjustment Method:
In a connected state, press TURBO + move the corresponding rocker (left or right) up to enhance vibration, or down to weaken vibration. A 2-second vibration prompt will confirm successful adjustment.
Vibration Levels:
100%, 70% (default), 30%, 0%.
5.4 ABXY Light Adjustment
Detail of the illuminated ABXY buttons, highlighting their vibrant colors and backlighting.
- Turn On/Off: In a connected state, press TURBO + double-click the right stick to toggle the light effect.
- Adjust Brightness: Press TURBO + long press the right stick to adjust the ABXY button brightness.
5.5 Factory Setting "Lock Mode"
Setting Method:
When the handle is in sleep mode, press and hold the SL and SYNC buttons for 5 seconds. The channel indicator LED1 will light up and flash slowly 3 times, indicating lock mode is active.
Unlock Mode:
Charge the joy-pad with a USB cable mounted on the Switch console rail to unlock it.
6. Maintenance
6.1 Rocker Ring Replacement
The joy-pad comes with round replacement rocker rings. Follow these steps to replace them:
- Location Schematic: Identify the rocker ring pins, handle alignment point, and rocker ring alignment line.
- Counterclockwise Rotation: Rotate the rocker circle alignment line and handle alignment point into a 45° angle line counterclockwise.
- Pull Up: Pull up the rocker ring and rocker cap vertically.
- Press Cap Against 3D Lever: Press the rocker cap against the 3D lever.
- Place Pins Against Alignment Point: Place the rocker ring pins against the handle alignment point as shown in the figure and press down.
- Rotate Clockwise: Rotate the rocker ring 45° clockwise to align the rocker ring alignment line to the handle alignment point to complete the replacement.
Schematic identifying key points for rocker ring replacement: (1) Rocker ring pins, (2) Handle alignment point, (3) Rocker ring alignment line.
Step 1 of rocker ring replacement: Rotate the rocker circle alignment line and handle alignment point into a 45° angle line counterclockwise.
Step 2 of rocker ring replacement: Pull up the rocker ring and rocker cap vertically.
Step 3 of rocker ring replacement: Press the rocker cap against the 3D lever.
Step 4 of rocker ring replacement: Place the rocker ring pins against the handle alignment point as shown in the figure and press down.
Step 5 of rocker ring replacement: Rotate the rocker ring 45° clockwise to align the rocker ring alignment line to the handle alignment point to complete the replacement.
6.2 Calibration Rocker
To calibrate the joysticks, follow these steps on your Nintendo Switch console:
- Go to 'System Settings' > 'Controllers and Sensors' > 'Calibrate Control Sticks'.
- Select the rocker you wish to calibrate.
- Press the 'X' button on the handle, then the 'A' button.
- Follow the on-screen prompts to move the stick upward, downward, left, right, and in a circle.
The 'Calibrate Control Sticks' screen on the Nintendo Switch, used for joystick calibration.
Note:
- If the cursor bounces outside the innermost circle during calibration, press the 'B' button to exit and correct it again.
- The Hall Effect joysticks are designed to prevent drift, but calibration can help ensure optimal performance.
7. Troubleshooting
- Connection Issues: If the joy-pad is not connecting wirelessly, ensure the console is in the correct pairing mode ('Change Grip/Order') and long-press the SYNC button on the joy-pad.
- Charging Problems: If the joy-pad is not charging, check the power adapter connection to the Switch console or ensure the joy-pad is powered off when charging directly.
- Joystick Drift/Inaccuracy: Perform a joystick calibration as described in Section 6.2. If the cursor bounces outside the innermost circle, press 'B' to exit and re-calibrate.
- Low Battery Alarm: If the channel light flashes, the battery voltage is below 3.3V. Charge the joy-pad immediately.
- Buttons Not Responding: If specific buttons are not responding as expected, check if any back-button mapping or macro programming is active that might be overriding their function. Consider clearing back-button settings (Section 5.2) or restoring factory settings (Section 5.5).
8. User Tips
- First Use: For the best gaming experience, fully charge the joy-pad before using it for the first time.
- Connection Stability: Avoid touching the 3D joysticks during the initial connection process to prevent potential calibration issues.
- Customization: Take advantage of the back-button mapping and macro programming features to tailor the controller to your play style. Remember to cancel continuous turbo mode when configuring these settings.
- Ergonomics: The design of the NYXI Wizard is noted for its comfort, allowing for longer gaming sessions.
- Anti-Drift: The Hall Effect joysticks are a significant feature for longevity and precision, especially for retro game enthusiasts.
- Button Configuration: While the connection is generally good, familiarizing yourself with the button configuration options will help optimize your setup.
9. Warranty and Support
The after-sales service period for this product is 2 years. Please follow these instructions strictly. If you encounter any problems during use, you can contact us for consultation and solutions.
Our email for support is: service@nyxigaming.com. We aim to respond to your inquiries within 24 hours.
A detailed user manual in PDF format is available for download here.
10. Product Video
Watch the official product video to see the NYXI Wizard Wireless Joy-pad in action and learn more about its features:
Official product video showcasing the features and modular design of the NYXI Wizard Wireless Joy-pad.
11. Precautions
- Do not expose the product to liquid.
- Do not disassemble the product.
- Avoid dropping the product.
- Avoid extremely high or low temperatures.