Fydun FGB867074569539

Contents

Fydun Bluetooth 5.0 AUX Music Interface Adapter User Manual

Model: FGB867074569539 (Audio Cable)

Brand: Fydun

1. Introduction

This manual provides instructions for the Fydun Bluetooth 5.0 AUX Music Interface Adapter. This device allows you to wirelessly stream audio from your Bluetooth-enabled device to your vehicle's AMI, MMI, or MDI system. It features high-speed transmission and high-definition audio quality, making it a convenient upgrade for compatible vehicles.

2. Safety Information

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.

3. Package Contents

  • 1 x Bluetooth 5.0 AUX Music Interface Adapter (Audio Cable)

4. Specifications

Feature Detail
Product Name Audio Cable
Model FGB867074569539
Batch/Serial Number 2348544515-941
Material ABS
Color Black
Bluetooth Version 5.0
Voltage Input 5-12V
Special Features AUX Cable for MMI
Interface Bluetooth
Item Type Cables, Adapters & Sockets
Origin Mainland China
Package Dimensions Length: 7cm, Width: 2cm, Height: 2cm
Package Weight 0.029 kg

Fitment:

  • Fits for AMI MDI MMI systems after 2010 years.
  • Compatible with Audi R7, S5, Q7, A6L, A8L, A4L.

Important Note: The product is not compatible with iPhone 11 and above models.

5. Setup and Installation

  1. Preparation: Remove all protective packaging materials from the equipment.
  2. Check Compatibility: Ensure your vehicle has an AMI, MMI, or MDI interface. This adapter is designed for systems after 2010.
  3. Connect the Adapter: Plug the AMI/MDI connector of the adapter into the corresponding port in your vehicle. This port is often located in the glove compartment or center console.
    Fydun Bluetooth AUX Adapter connected to a car's MMI/MDI port
    Figure 1: Fydun Bluetooth AUX Adapter connected to a car's MMI/MDI port.
    Fydun Bluetooth AUX Adapter installed in a car's glove compartment
    Figure 2: Adapter installed in a car's glove compartment MDI port.
  4. Power On: The adapter uses a wide voltage input of 5-12V and should power on automatically once connected to the vehicle's interface.

Note on Product Variation: Please be aware that new and old types of this product may be shipped randomly. Both types function identically.

Comparison of new and old type Fydun Bluetooth AUX Adapter models
Figure 3: New and old type models of the adapter, shipped randomly.

6. Operating Instructions

  1. Pairing: Once the adapter is connected and powered on, enable Bluetooth on your mobile device. Search for available Bluetooth devices and select the Fydun adapter to pair.
  2. Audio Playback: After successful pairing, you can play music from your mobile device through your car's audio system. The adapter is compatible with popular applications like YouTube, Spotify, and iTunes.
  3. Automatic Reconnection: The adapter is designed to automatically reconnect to your paired device each time you enter the vehicle, providing a seamless audio experience.
  4. Selecting Source: On your car's MMI/MDI display, select the appropriate audio source (e.g., AUX, Media In) to hear the Bluetooth audio.
    Car MMI interface display showing audio source options
    Figure 4: Example of MMI interface display with audio source options.

7. Troubleshooting

Q: The device does not power on or is not detected by my phone/car.
A: Ensure the adapter is correctly and fully inserted into the AMI/MDI port. Check if your car's AMI interface is functioning. Some users reported issues with the device not powering on or being detectable, which could indicate a defective unit or incompatibility with specific car models/years (e.g., some 2015 Audi Q5, 2009 Audi A6 C6, or certain VW models).
Q: Audio quality is poor or volume is low.
A: While the adapter supports high-definition audio, some car MMI systems or specific audio settings might affect the output quality. Try adjusting the volume on both your phone and the car's audio system. Some users noted that the sound might be a bit low compared to the radio, requiring a volume increase. Poor audio quality could also indicate a defective unit.
Q: The adapter gets stuck in the AMI port.
A: If the adapter becomes physically stuck, avoid forcing it out to prevent damage to the car's port or the adapter. Contact customer support for assistance.
Q: The product is not compatible with my iPhone 11 or newer.
A: As stated in the specifications, this product is not compatible with iPhone 11 and above models. Please check your phone's compatibility before purchase.
Q: The car displays "AMI device not connected" or similar error.
A: This error suggests the car's system is not recognizing the adapter. Double-check the connection. If the issue persists, the adapter might be incompatible with your specific MMI/MDI version or could be faulty.

8. User Tips

  • Check MDI Input Space: The cable is not very long, so ensure there is enough space around your MDI input to accommodate the device comfortably.
  • Cost-Effective Solution: This adapter offers a simple and affordable way to add Bluetooth audio streaming to compatible vehicles without needing to upgrade the entire car audio system.
  • Automatic Reconnection: The adapter conveniently reconnects automatically each time you start your vehicle, saving you the hassle of manual pairing.
  • Potential Power Draw: Some users have noted that the device might draw power even when the vehicle is off. If you don't use it daily, consider disconnecting it for long periods to prevent potential battery drain.
  • Confirmed Compatibility: Users have reported good performance with Audi A4 B8, VW Tiguan MK1 (2013), and Skoda Fabia MK2.

9. Maintenance

  • After use, turn off the device (if applicable, by disconnecting from the port) and store it in a dry place.
  • Keep away from children.

10. Warranty and Support

For warranty claims or technical support, please contact the manufacturer or your point of purchase. Ensure you retain your proof of purchase and product details (Model: FGB867074569539, Batch/Serial Number: 2348544515-941).

11. Manufacturer Information

Manufacturer:

Company Name: Wenzhou Yilong Auto Parts Co., Ltd
Full Address: No. 2, Hongnan Road, Yueqing Bay Port Area, Yueqing City, Wenzhou City, Zhejiang Province, China
Email: yilong@ylap.cn
Telephone: 86-13875412547

EU Authorized Representative:

Company Name: Nenninger GmbH
Full Address: Friedrichstr. 95, 10117 Berlin, Germany
Email: nenningerde@gmail.com
Telephone: 49-12345678910

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.