1. Introduction
Thank you for purchasing the YIHUA 938D Portable Tweezers Soldering Station. This device is designed for efficient desoldering and soldering of SMD electronic components, offering precise temperature control and a user-friendly experience. Please read this manual thoroughly before operation to ensure safe and effective use.
2. Safety Precautions
- Always operate the soldering station in a well-ventilated area to avoid inhaling solder fumes.
- The soldering iron tips can reach very high temperatures. Avoid direct contact with skin or flammable materials.
- Use appropriate personal protective equipment, such as safety glasses, to protect against solder splashes.
- Ensure the power supply matches the voltage requirements of the unit (110V or 220V as specified for your model).
- Do not use the device near water or in damp conditions.
- Unplug the unit from the power outlet when not in use or before cleaning/maintenance.
- Keep the device out of reach of children.
3. Package Contents
Please check the package for the following items:
- YIHUA 938D Control Unit
- Tweezers Soldering Iron Handle
- Soldering Iron Stand with Sponge Tray
- Cleaning Sponge
- Power Cord (specific to region: US, EU, UK, AU)
- Additional Soldering Tips (if included in set)
4. Setup
- Place the Stand: Position the soldering iron stand on a stable, heat-resistant surface.
- Prepare the Sponge: Lightly dampen the cleaning sponge with water and place it in the sponge tray of the stand.
- Connect the Tweezers Iron: Plug the connector of the tweezers soldering iron handle into the corresponding port on the YIHUA 938D control unit. Ensure it is securely fastened.
- Connect Power: Plug the power cord into the control unit, then plug the other end into a grounded electrical outlet matching the unit's voltage.
- Place Iron in Stand: Rest the tweezers soldering iron in its stand when not in use.
5. Operating Instructions
5.1 Power On/Off
Flip the ON/OFF switch on the control unit to the 'ON' position to power on the device. The digital display will light up, showing the current temperature. Flip the switch to 'OFF' to power down.
5.2 Temperature Adjustment
The YIHUA 938D allows for precise temperature control. Use the rotary knob on the control unit to set the desired temperature. The temperature range is typically 200°C to 480°C (392°F to 896°F). The digital display will show the set temperature and then the actual temperature as it heats up or cools down.

The control unit features a toggle switch to select between Celsius (°C) and Fahrenheit (°F) temperature display.
5.3 Sleep Function
The unit features an automatic sleep function to save energy and prolong tip life. If the soldering iron is not operated for approximately 10 minutes, it will enter sleep mode, and the display may show 'SLP' or a reduced temperature. To exit sleep mode, simply pick up the iron or adjust the temperature knob.

The sleep function activates after 10 minutes of inactivity, protecting the iron tip and saving energy.
5.4 SMD Component Work
The tweezers design is ideal for working with Surface Mount Devices (SMD). The dual tips allow for simultaneous heating of both pads of a component, making removal and installation quicker and safer for the PCB.

The tweezers soldering iron is suitable for a wide range of SMD electronic components, including common sizes like 0805, 1206, 1210, and 1812.
5.5 Tip Replacement
To replace the soldering tips, ensure the unit is powered off and cooled down. Unscrew the retaining nuts on each side of the tweezers iron, carefully remove the old tips, and insert the new ones. Tighten the retaining nuts gently to secure the tips.
5.6 Product Demonstration Video
Official product demonstration video showing the YIHUA 938D's features, setup, temperature adjustment, and effective desoldering of SMD components.
6. Maintenance
- Tip Cleaning: Regularly clean the soldering tips using the damp sponge or brass wool to remove excess solder and oxidation. This ensures efficient heat transfer and prolongs tip life.
- Tip Tinning: After cleaning, always re-tin the tips with a small amount of solder to prevent oxidation.
- Unit Cleaning: Ensure the unit is unplugged and cooled before cleaning. Wipe the control unit and handle with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the soldering station in a dry, dust-free environment when not in use.
7. Troubleshooting
7.1 No Power
- Check if the power cord is securely plugged into both the unit and the wall outlet.
- Ensure the power switch is in the 'ON' position.
- Verify the wall outlet is functional by plugging in another device.
7.2 Iron Not Heating
- Ensure the tweezers iron connector is fully inserted into the control unit.
- Check if the temperature is set above room temperature.
- Inspect the soldering tips for severe oxidation or damage; replace if necessary.
7.3 Inconsistent Temperature
- Ensure the tips are clean and properly tinned.
- Verify the tips are securely fastened. Loose tips can affect heat transfer.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | YIHUA |
| Model Number | YIHUA 938D tweezers Soldering Iron Station |
| Input Voltage | 110V~240V optional |
| Output Temperature | 200~480°C (392~896°F) |
| Temperature Stability | 2°C (static state) |
| Output Voltage (Power) | 120W Soldering Iron Station (60W per tip) |
| Dimensions | 37*17.5*8 cm (Package), Control Unit: 200mm x 135mm (approx.) |
| Certification | CE, FCC |
| Is Smart Device | No |

The tweezers soldering iron provides 60W of power per tip, suitable for components up to approximately 15mm.

The control unit is light and portable, with approximate dimensions of 200mm in length and 135mm in width.
9. User Tips
- For small SMD chips, always use flux and set the temperature to 400°C or higher for easier removal.
- If the soldering tip angle is too sharp for your application, it can be carefully straightened a bit before use.
- To reduce wobble in the tweezers, pull down the cover on the grip and tighten the internal screw.
- Some users may find it beneficial to remove the protruding round rod from the plug for direct insertion into certain outlets (ensure electrical safety).
10. Frequently Asked Questions (FAQ)
10.1 Is the YIHUA 938D dual-voltage (bivolt)?
The YIHUA 938D is available in different input voltage versions (110V or 220V). Please select the model that matches your local voltage requirements. It is not typically a universal dual-voltage device unless explicitly stated.
10.2 Does the EU version support 220V?
Yes, the EU version is designed for 220V operation.
10.3 Does it output voltage at the tips?
No, the soldering tips are designed to generate heat, not to output voltage. They are electrically isolated for safety during operation.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for warranty claims.
For more detailed diagrams and specific instructions, you may refer to the official user manual PDF available at https://manuals.plus/m/2be44fcf45dbf598c98fd5744ddcfd2f3a5fb86b33d07b26c0ace4eece1930b7.
