MOES Fingerbot Plus

Contents

MOES Tuya Smart Fingerbot Plus User Manual

Model: Fingerbot Plus

Your smart solution for automating physical buttons and switches.

1. Introduction

The MOES Tuya Smart Fingerbot Plus is a versatile smart device designed to automate the pressing of physical buttons and switches in your home. It integrates seamlessly with the Tuya Smart Life App and supports voice control via Alexa and Google Assistant. Available in both Bluetooth and Zigbee variants, it offers flexible connectivity options for various smart home ecosystems.

MOES Tuya Smart Fingerbot Plus with various accessories

Image: MOES Tuya Smart Fingerbot Plus with included accessories.

2. Safety Information

  • Keep the device away from water and high humidity environments.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
  • Use only the specified charging method (Type-C) and voltage.
  • Keep out of reach of children.
  • Avoid extreme temperatures.

3. Package Contents

Upon opening your Fingerbot Plus package, you should find the following items:

  • Fingerbot Plus Device x 1
  • 3M Tape x 2 (for mounting)

Note: Additional tool packs (rocker arm, hing arm, etc.) are sold separately and are not included in the standard package. A USB Type-C charging cable is also not included.

Fingerbot Plus packaging showing contents and specifications

Image: Packaging details, including listed contents and specifications.

4. Specifications

Feature Detail
Dimensions 34.5 x 34.5 x 46.5 mm (1.36 x 1.36 x 1.83 inches)
Maximum Movement 12 mm
Wireless Protocol Bluetooth / Zigbee (variant dependent)
Battery Type Rechargeable Lithium Battery
Weight 36g
Pushing Force 10N
Charging Port Type-C
Certifications CCC, CE, RoHS
Material Plastic

5. Setup

5.1. Charging the Device

Before initial use, fully charge your Fingerbot Plus using a USB Type-C cable (not included). The charging port is located on the side of the device.

Fingerbot Plus with USB-C charging port

Image: Close-up of the Fingerbot Plus showing the USB Type-C charging port.

5.2. Mounting the Device

The Fingerbot Plus is designed for easy installation using the included 3M adhesive tape. Ensure the surface is clean and dry before application.

  1. Identify the button or switch you wish to automate.
  2. Clean the area around the button/switch where the Fingerbot will be mounted.
  3. Peel off the protective film from one side of the 3M tape and attach it to the back of the Fingerbot Plus.
  4. Carefully align the Fingerbot's arm with the center of the button/switch.
  5. Peel off the remaining protective film from the 3M tape and firmly press the Fingerbot onto the surface for at least 30 seconds.
Fingerbot Plus mounted on a light switch

Image: Fingerbot Plus correctly mounted on a light switch.

5.3. Pairing with the Tuya Smart Life App (Bluetooth)

For Bluetooth models, follow these steps to connect to the Tuya Smart Life App:

  1. Download and install the Tuya Smart or Smart Life app from your mobile app store.
  2. Register or log in to your account.
  3. Open the app and tap the '+' icon in the top right corner to add a device.
  4. Select 'Add Device' and choose 'Fingerbot' or 'Switch (Bluetooth)'.
  5. Press and hold the reset button on the Fingerbot (usually a small button on the device) until the blue indicator light starts blinking.
  6. Confirm the indicator status in the app and proceed with pairing.
  7. Once connected, you can rename the device and configure its settings.
Fingerbot Plus controlled via smartphone app

Image: Fingerbot Plus being controlled through a smartphone application.

5.4. Pairing with a Zigbee Hub

For Zigbee models, the Fingerbot Plus can be paired with a compatible Zigbee hub (e.g., Tuya Zigbee Gateway, Home Assistant with Z2M, SmartThings). The pairing process is similar to Bluetooth:

  1. Ensure your Zigbee hub is powered on and in pairing mode.
  2. Press and hold the reset button on the Fingerbot until the blue indicator light starts blinking.
  3. Your hub should discover the device. Follow the hub's instructions to complete the pairing.
Home Assistant Zigbee2MQTT interface showing Fingerbot device information

Image: Home Assistant Zigbee2MQTT interface displaying Fingerbot device details.

5.5. Firmware Update

It is recommended to keep your Fingerbot Plus firmware updated for optimal performance and compatibility. If using a Zigbee variant with Z2M, updating the firmware via the native Tuya app first can resolve issues with incorrect battery voltage reporting.

Device update screen showing firmware version and update progress

Image: Device update screen in the app, showing firmware version V1.3.3 updating to V1.3.6.

6. Operation

6.1. Manual Touch Control

The Fingerbot Plus features a touch sensor on its top surface, allowing you to manually trigger the button/switch without using the app or voice commands. Simply tap the top of the device to activate it.

Hand manually pressing the Fingerbot Plus on a wall switch

Image: A hand manually pressing the Fingerbot Plus, which is attached to a wall switch.

6.2. App Control (Tuya Smart Life)

Through the Tuya Smart Life App, you have extensive control over the Fingerbot Plus:

  • On/Off: Simple toggle for basic button presses.
  • Modes: Choose between 'Click' (single press), 'Switch' (toggle on/off), or 'Loop' (repeated actions).
  • Movement Amplitude: Adjust the 'Lower' and 'Upper' movement limits (e.g., 0-100%) to precisely control how far the arm extends and retracts.
  • Delay: Set a 'Delay' (e.g., 0-10 seconds) for the action.
  • Reverse: Invert the action if needed.
  • Touch Control: Enable or disable the manual touch sensor.
Tuya Smart Life app interface showing Fingerbot settings for mode, movement limits, and delay

Image: App interface displaying various settings for the Fingerbot, including mode, lower/upper movement limits, and delay.

Fingerbot Plus automating a coffee maker via smartphone app

Image: Fingerbot Plus automating a coffee maker, controlled by the Smart Life app on a smartphone.

6.3. Voice Control

Integrate your Fingerbot Plus with voice assistants for hands-free control:

  • Amazon Alexa: Link your Tuya Smart Life account to Alexa. Use commands like, "Alexa, turn on the Fingerbot."
  • Google Assistant: Link your Tuya Smart Life account to Google Assistant. Use commands like, "Hey Google, turn on the Fingerbot."
  • Apple Siri: For Bluetooth models, you can often create Siri Shortcuts within the Smart Life app to trigger actions.
Fingerbot Plus with Alexa and Google Home for voice control

Image: Fingerbot Plus shown with Amazon Alexa and Google Home devices, illustrating voice control capabilities.

6.4. Home Assistant / Z2M Integration

For advanced users, the Zigbee variant of the Fingerbot Plus can be integrated into Home Assistant using Zigbee2MQTT (Z2M) or ZHA. This allows for detailed automation and scheduling.

Home Assistant Zigbee2MQTT interface showing detailed Fingerbot settings including state, mode, movement limits, and battery level

Image: Detailed Home Assistant Zigbee2MQTT interface for Fingerbot, showing configuration options like state, working mode, lower/upper movement limits, delay, reverse, and battery percentage.

7. Maintenance

7.1. Battery

The Fingerbot Plus is equipped with a rechargeable lithium battery. When the battery is low, recharge it using a USB Type-C cable. The bottom of the device can be opened to access and potentially replace the battery if needed, though it is designed for long-term use with its rechargeable cell.

7.2. Cleaning

Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners, as this may damage the device's surface or internal components.

8. Troubleshooting

  • Device not pairing: Ensure the device is charged, within range of your phone/hub, and in pairing mode (blinking blue light). Try resetting the device.
  • Incorrect battery voltage in Z2M (Zigbee): If your Zigbee Fingerbot reports 1% battery in Z2M, connect it to the native Tuya Smart Life app first. Update its firmware through the Tuya app, then re-pair with Z2M. This often resolves the issue.
  • Actuation arm not reaching/pressing button: Ensure the Fingerbot is mounted correctly and as close as possible to the button. If the button is recessed or requires a longer reach, consider purchasing additional tool arms (e.g., rocker arm, hing arm) which are sold separately.
  • Device not responding to commands: Check battery level, app/hub connection, and ensure there are no physical obstructions.

9. User Tips

  • For Zigbee models, pairing with a 3rd reality hub or directly with Home Assistant (ZHA/Z2M) is generally straightforward after holding the reset button until the blue light blinks.
  • The manual touch sensor on top is convenient for quick local control.
  • The device's pushing force (10N) is sufficient for stiff buttons, including some Schneider Electric switches.
  • Consider 3D printing custom attachments if the standard arm or optional tool packs don't perfectly fit your specific button or switch.
  • The modular design with various tool arms (sold separately) allows for adaptation to many different use cases.
  • Fingerbot Plus with various modular tool arms

    Image: Fingerbot Plus demonstrating its modular design with different tool arms for varied applications.

10. Frequently Asked Questions (FAQ)

Q: Does the device work with Wi-Fi?
A: The Fingerbot Plus connects via Bluetooth or Zigbee, not directly via Wi-Fi. It can integrate into a Wi-Fi-based smart home system through a compatible hub (e.g., Tuya Zigbee Gateway) or by connecting to your phone via Bluetooth, which then uses your phone's Wi-Fi connection.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

The product is covered by a Declaration of Conformity, ensuring it meets relevant standards.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.