Tuya ME323 Zigbee Gateway

Contents

Tuya ZigBee Multi-mode Gateway Hub

Model: ME323

1. Introduction

The Tuya ZigBee Multi-mode Gateway Hub (Model ME323) serves as a central bridge for your smart home ecosystem. It connects Zigbee and Bluetooth devices to your Wi-Fi network, enabling seamless communication with the Tuya Smart or Smart Life app, and integration with voice assistants like Amazon Alexa, Google Home, and Yandex Alice. This gateway allows you to remotely control and automate various smart devices, creating a more connected and intelligent living space.

Tuya Multi-mode Gateway Hub with compatibility logos
The Tuya Multi-mode Gateway Hub supports 2.4GHz WiFi, ZigBee 3.0, and Bluetooth wireless protocols, compatible with various smart home platforms.

2. Package Contents

Please check the box for the following items:

  • 1 x Tuya ZigBee Multi-mode Gateway Hub (ME323)
  • 1 x USB Cable (Type-C)
  • 1 x Product Manual
Gateway Hub and USB-C cable
Included in the package: the gateway hub and its USB-C power cable.

3. Specifications

FeatureDetail
Model NumberME323 (also TYZB1)
Power InputDC 5V / 1A (Type-C USB)
Communication MethodsWi-Fi (2.4GHz), Zigbee 3.0 (IEEE 802.15.4), Bluetooth-compatible
Wi-Fi StandardIEEE 802.11b/g/n
Communication Frequency2.405 - 2.480GHz
Supported AppSmart Life / Tuya Smart App
CertificationsCE, RoHS
Operating Temperature-10°C to 60°C
Operating Humidity10% - 90% RH (non-condensing)
Product Dimensions61.5 x 61.5 x 14.5 mm
OriginMainland China
Bottom view of Smart Gateway showing model and power input
The bottom of the gateway displays its model (TYZB1) and power input requirements (5V-1A).

4. Setup Guide

4.1. Powering On the Gateway

  1. Connect the provided USB Type-C cable to the gateway's power port.
  2. Plug the other end of the USB cable into a 5V/1A USB power adapter (not included) or a compatible USB port.
  3. The gateway will power on, and its indicator lights will activate.

4.2. Mobile App Installation

  1. Scan the QR code provided in the product manual or search for "Tuya Smart" or "Smart Life" in your mobile app store (App Store for iOS, Google Play Store for Android).
  2. Download and install the app.
  3. Register or log in to your account.

4.3. Gateway Network Configuration (Pairing)

Before starting, ensure your mobile phone is connected to a 2.4GHz Wi-Fi network and has Bluetooth enabled.

  1. Power on the gateway.
  2. Press and hold the Reset button on the gateway for approximately 5 seconds.
  3. The gateway's indicator lights will change: the red light will be solid, and the green light will be flashing. This indicates it's in pairing mode.
  4. Open the "Tuya Smart" or "Smart Life" app on your mobile phone.
  5. The app should automatically detect the new device and prompt you to add it. If not, tap the "+" icon in the top right corner to add a device, then select "Gateway" or "Others (Wi-Fi)" and follow the on-screen instructions.
  6. Confirm your 2.4GHz Wi-Fi network and enter its password when prompted.
  7. Wait for the gateway to connect to the network. Once successfully connected, both the red and green indicator lights will be solid.
  8. You can now rename your gateway in the app and proceed to add Zigbee or Bluetooth sub-devices.
User manual showing app download and pairing steps
The included user manual illustrates the app download via QR code and the three-step pairing process.

5. Operation

5.1. Adding Sub-Devices

Once your gateway is set up, you can add Zigbee and Bluetooth devices to it:

  1. In the Tuya Smart/Smart Life app, navigate to your gateway's control panel.
  2. Tap "Add sub-device" or a similar option.
  3. Put your Zigbee or Bluetooth device into pairing mode (refer to the device's manual for specific instructions, usually involving a reset or power cycle).
  4. The app will search for and discover the new device.
  5. Once found, add the device and assign it a name and room.

5.2. Smart Home Integration

The gateway allows your Zigbee and Bluetooth devices to be controlled via the app, set up in automations, and integrated with voice assistants:

  • App Control: Control all connected devices from anywhere using the Tuya Smart/Smart Life app.
  • Automation: Create scenes and automations (e.g., turn on lights when a door sensor is triggered, adjust thermostat based on schedule).
  • Voice Control: Link your Tuya/Smart Life account to Amazon Alexa, Google Home, or Yandex Alice to control devices with voice commands.
Diagram of smart home integration with gateway
The gateway acts as a central hub, connecting various smart devices (sensors, switches, lights, motors) to your Wi-Fi network for app and internet control.

6. Maintenance

  • Keep the device in a dry environment, away from direct sunlight, high temperatures, and humidity.
  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Ensure proper ventilation around the device.
  • Avoid dropping or subjecting the device to strong impacts.

7. Troubleshooting

7.1. Gateway Not Connecting to Wi-Fi

  • Check Wi-Fi Band: Ensure your router is broadcasting a 2.4GHz Wi-Fi signal and your phone is connected to it during setup. The gateway does not support 5GHz Wi-Fi.
  • Wi-Fi Password: Double-check that you are entering the correct Wi-Fi password.
  • Router Proximity: Place the gateway closer to your Wi-Fi router during the initial setup.
  • Router Settings: Ensure your router's DHCP is enabled and there are no MAC address filters preventing new devices from connecting.
  • Reset Gateway: Perform a factory reset on the gateway (see below) and try pairing again.

7.2. Sub-Devices Not Pairing

  • Device Pairing Mode: Ensure the sub-device is correctly put into its pairing/discovery mode. Refer to the sub-device's manual.
  • Proximity: Bring the sub-device closer to the gateway during pairing.
  • Battery: Check if the sub-device has sufficient battery power.
  • Gateway Status: Ensure the gateway itself is online and connected to your Wi-Fi.

7.3. Factory Resetting the Gateway

If you need to reset the gateway to its factory settings or reconfigure its network:

  1. With the gateway powered on, press and hold the Reset button for approximately 5 seconds.
  2. The indicator lights will change: the red light will be solid, and the green light will be flashing. This indicates the gateway has reset its network configuration and is ready for pairing again.

8. User Tips

  • 2.4GHz Wi-Fi is Key: Always ensure your phone is connected to your router's 2.4GHz Wi-Fi network during setup, as the gateway will not detect 5GHz networks.
  • Power Adapter: Remember that a 5V/1A USB power adapter is required but not included; only the USB-C cable is provided.
  • Range Considerations: While compact, the gateway's Zigbee/Bluetooth range can be limited by obstacles. For larger homes, consider placing it centrally or using multiple hubs for optimal coverage.
  • Easy Setup: Many users find the gateway very easy to set up, often being recognized immediately by the Smart Life/Tuya app.

9. Frequently Asked Questions (FAQ)

Q: Is this device Zigbee?
A: Yes, this is a Zigbee 3.0 compatible gateway, also supporting Bluetooth.
Q: How do I reset the gateway?
A: Press and hold the reset button for about 5 seconds until the red light is solid and the green light flashes.
Q: Can this hub be connected via an Ethernet cable (UTP)?
A: No, this gateway connects wirelessly to your router via 2.4GHz Wi-Fi.
Q: Can I connect it to the router via Wi-Fi?
A: Yes, its primary connection to your home network is via 2.4GHz Wi-Fi.
Q: Does it work with only Wi-Fi devices (no Zigbee)?
A: This gateway's main function is to allow Zigbee and Bluetooth devices to connect to your Wi-Fi network and be controlled via the app. Wi-Fi-only devices typically connect directly to your Wi-Fi router and do not require this gateway.
Q: Can I connect Wi-Fi sensors and bulbs without Zigbee to this gateway?
A: No, this gateway is for Zigbee and Bluetooth devices. Wi-Fi-only devices connect directly to your Wi-Fi network and are managed by the Tuya/Smart Life app without needing this specific gateway.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided by your retailer or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.