NEWBOLER LIG011 Smart Bicycle Light

1. Safety Precautions

Please read all safety instructions carefully before use.

• The bicycle light generates heat during use. This is normal. If the temperature becomes too high, stop using the light until it cools down.
• If the bicycle light is not used for an extended period, charge it every three months to maintain battery health.
• Do not irradiate directly into the eyes. Keep the light away from flammable and explosive objects.
• The waterproof rating is IPX5. Do not soak the bicycle light in water.
• Properly place the bicycle light out of reach of children to avoid accidents.

2. Package Contents

Please check the box for the following items:

• NEWBOLER LIG011 Bicycle Light
• Handlebar Mounting Bracket
• Bracket Screws
• Screwdriver
• USB Charging Cable
• Instruction Manual
• Color Box

3. Setup and Installation

The LIG011 light offers versatile mounting options for your handlebar.

Figure 1: Two common installation methods on a bicycle handlebar.

3.1 Attaching the Mounting Bracket

1. Select your preferred mounting position on the handlebar.
2. Place the bracket base around the handlebar.
3. Secure the base to the handlebar using the provided screws and screwdriver. Ensure it is tight and stable.

3.2 Attaching the Bicycle Light

1. Align the main body of the headlight with the slot on the installed bracket base.
2. Push the light backward into the slot until it clicks securely into place.

3.3 Removing the Bicycle Light

1. To remove, first press down on the release clip located on the bracket.
2. While holding the clip down, pull the light forward to detach it from the bracket.

4. Operating Instructions

4.1 Power On/Off and Mode Selection

The LIG011 features multiple lighting modes to suit various riding conditions.

Figure 2: Overview of light modes and approximate battery life.

• To Power On/Off: Press and hold the power button.
• To Cycle Modes: Short press the power button to switch between modes.
• Mode 1 (Strong Light - Wide): Single lamp bead at 100% power. (Approx. 5.5 hours runtime)
• Mode 2 (Intelligent Mode): Double lamp bead automatic adjustment. Enters highlight mode for 40 seconds, then automatically darkens in bright light and brightens in dark conditions. (Approx. 5 hours runtime)
• Mode 3 (Low Light - Wide): Single lamp bead at 60% power. (Approx. 10 hours runtime)
• Mode 4 (Strobe): Flashing light mode. (Approx. 18 hours runtime)
• Highest Brightness Mode (Strong Light - Full): Quickly press the power button twice in any mode to enter this mode. This mode generates significant heat; use it primarily when riding. (Approx. 3 hours runtime)

4.2 Smart Light Sensor

The LIG011 is equipped with a smart light sensor that automatically adjusts brightness based on ambient light conditions, optimizing visibility and battery life.

Figure 3: The smart sensor detects ambient light for automatic adjustment.

4.3 Power Display

The light features an LED power display to indicate the remaining battery level:

• Four blue LEDs: 100% - 75%
• Three blue LEDs: 75% - 50%
• Two blue LEDs: 50% - 25%
• One blue LED: Below 25% (Recharge soon)

4.4 Power Bank Function

The integrated 10000mAh battery can also be used as a power bank to charge other USB-powered devices. Connect your device to the output USB port on the light.

5. Charging the Bicycle Light

To charge your LIG011 bicycle light:

1. Connect the provided USB cable to the charging port on the light.
2. Connect the other end of the USB cable to a USB power source (e.g., computer, wall adapter, power bank).
3. During charging, the four blue power display lights will breathe (blink slowly).
4. Once fully charged, all four blue power display lights will remain steadily on.

A full charge typically takes approximately 9 hours.

6. Maintenance and Care

• Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the light in a cool, dry place away from direct sunlight. If storing for extended periods, ensure it is charged every three months.
• Water Exposure: While IPX5 rated (splash-proof), avoid submerging the light in water. Ensure the USB port cover is securely closed when not charging to prevent water ingress.

7. Troubleshooting

8. Specifications

9. User Tips

• Battery Performance: Users report excellent battery life, even on high settings, lasting for many hours of night riding.
• Charging Time: Be aware that a full charge can take up to 9 hours, so plan accordingly.
• Mount Stability: Due to the light's solid construction and weight, ensure the handlebar mount is very secure. Some users prefer metal mounts for added stability.
• Heat Management: The light can get very warm on high settings. This is normal, but if it becomes too hot, switch to a lower mode or allow it to cool. Riding helps with airflow.
• USB Cable: The included USB charging cable may be short; consider using a longer one if needed for convenience.
• Waterproofing Note: While rated IPX5, some users have expressed concern about the visibility of the battery pack through the mounting bracket. Always ensure the USB port cover is tightly sealed, and avoid direct high-pressure water exposure to the underside of the light, especially near the mount.

10. Frequently Asked Questions (FAQ)

Q: Does this light come with a helmet mount?

A: No, this model is designed for handlebar mounting and does not include a helmet mount.

Q: Does this model come with control buttons?

A: Yes, the light features a single power button that controls power on/off and cycles through the different lighting modes.

Q: Is the mounting system tool-free?

A: The initial installation of the bracket to the handlebar requires screws and a screwdriver (provided). Once the bracket is installed, attaching and detaching the light itself is tool-free.

Q: Can the internal batteries be replaced easily?

A: The internal 10000mAh battery is not designed for easy user replacement.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the point of purchase. Keep your proof of purchase for any warranty claims.

12. Product Video Demonstration