JOMAA CP011669 / EM03

Contents

JOMAA RGB Backlit Wireless Trackball Mouse

User Manual - Model: CP011669 / EM03

1. Introduction

Thank you for purchasing the JOMAA RGB Backlit Wireless Trackball Mouse. This ergonomic trackball mouse is designed for comfort and precision, offering versatile connectivity options for various devices. Please read this manual carefully to ensure proper use and maintenance of your device.

JOMAA RGB Backlit Wireless Trackball Mouse

Figure 1: JOMAA RGB Backlit Wireless Trackball Mouse

2. Package Contents

  • JOMAA RGB Backlit Wireless Trackball Mouse (Model CP011669 / EM03)
  • USB 2.4G Receiver
  • USB-C Charging Cable
  • User Manual (this document)

3. Setup

3.1 Charging the Mouse

  1. Locate the USB-C charging port on the front of the mouse.
  2. Connect the provided USB-C cable to the mouse and the other end to a USB power source (e.g., computer USB port, USB wall adapter).
  3. The RGB lighting may indicate charging status (refer to operating section for details). A full charge typically takes a few hours.
Rechargeable Trackball Mouse with Type-C charging port

Figure 2: Charging the mouse via Type-C port

3.2 Connecting the Mouse

The mouse supports three connection modes: 2.4G Wireless (via USB receiver) and two Bluetooth channels (BT1, BT2). You can switch between these modes using the selector switch on the bottom of the mouse.

Bottom of the mouse showing power switch, mode switch, and 2.4G USB receiver storage

Figure 3: Mouse bottom with power and mode switches

3.2.1 2.4G Wireless Connection

  1. Turn on the mouse using the ON/OFF switch on the bottom.
  2. Remove the USB 2.4G receiver from its storage slot on the bottom of the mouse.
  3. Plug the USB receiver into an available USB port on your computer.
  4. Slide the mode switch on the bottom of the mouse to position '1' (2.4G mode).
  5. The mouse should be automatically recognized and ready for use.

3.2.2 Bluetooth Connection (BT1 / BT2)

  1. Turn on the mouse using the ON/OFF switch on the bottom.
  2. Slide the mode switch on the bottom of the mouse to position '2' (BT1) or '3' (BT2).
  3. The RGB light around the trackball will start flashing, indicating it's in pairing mode.
  4. On your device (computer, tablet, smartphone), go to Bluetooth settings and search for new devices.
  5. Select

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.