1. Overview
The SONICAKE Matribox is a compact multi-effects processor designed with potent circuit design and high-quality digital effects. It offers over 130 various effects suitable for electric guitar, acoustic guitar, bass, and even keyboard. It aims to enhance your playing sound and make it more attractive.
Specifically for electric guitar, the Matribox features 40+ legendary amplifier models and numerous simulators based on classic effect pedals, all derived from White-Box digital modeling technology. Every detail of the tone is meticulously crafted from real feedback of electronic components. It includes 9 movable effect modules to help you create your own effect matrix.






2. Attention & Safety Instructions
Handling
- Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately.
- Do not block any of the ventilation openings.
- Keep away from heat sources.
- Disconnect the unit during storms to prevent damage.
- Operation of this unit within significant electromagnetic fields should be avoided.
Connecting the Power and Input/Output Jacks
- Always turn OFF the power to the unit and all other equipment before connecting or disconnecting any cables.
- Also make sure to disconnect all connection cables and the AC adapter before moving the unit.
Cleaning
- Clean only with a dry cloth.
Alterations
- Do not open the unit.
- Do not attempt to service the unit yourself.
- Opening the chassis for any reason will void the manufacturer's warranty.
AC Adapter Operation
- Always use a DC9V center negative 500mA AC adapter. Use of an adapter other than that specified could damage the unit or cause malfunction and pose a safety hazard.
- Always connect the AC adapter to an AC outlet that supplies the rated voltage required by the adapter.
- Unplug the unit during lightning storms or when unused for long periods of time.
3. Panel Introduction
Front Panel Controls
- VOLUME: Controls the master volume.
- Display: To display preset information and other operational information.
- PARA Knob: Can be turned or pressed to adjust parameters or change menus.
- GLOBAL Button: Press to enter the Global menu.
- DRUM Button: Press to turn on/off the drum machine, hold to enter the Drum menu.
- BACK Button: Press to return to the previous menu.
- SAVE Button: Press to enter the Save menu to store changed parameters, rename or copy presets.
- Parameter Knobs (3): To adjust the parameters at the bottom of the screen; each menu has different functions.
- Footswitches (2): To switch presets forward or backward; press together to enter the tuner; long press together to enter the looper.
- Expression Pedal: To control effect parameters or volume, and press the toe hard to switch the pedal function.
Rear Panel Connections
- INPUT: 1/4" TS mono input jack for plugging in your instrument.
- OUTPUT L (MONO) / R: 2 x 1/4" TS stereo output jacks for plugging in amps or other equipment.
- AUX IN: 1/8" TRS stereo input for connecting external devices (phone, MP3 player).
- PHONES: 1/8" TRS stereo output for plugging in headphones.
- USB: USB Type-C connects to computer for use with supporting edit software or connects to computer/phone as an audio interface.
- DC 9V: Plug in the DC 9V center negative power jack.
4. Operating Modes
The Matribox has two primary working modes, each with different functions for its footswitches.
Preset Mode
In Preset Mode, press any footswitch to switch between presets.
Stomp Mode
In Stomp Mode, press any footswitch to switch the on/off status of the corresponding effect module. The specific module controlled by each footswitch can be configured in the effects editing menu.
Switching Between Modes
From the main menu, press and hold both footswitches simultaneously to toggle between Preset Mode and Stomp Mode.
Tap Tempo Function
Press and hold both footswitches to activate Tap Tempo. This function allows you to set the preset BPM by tapping the footswitches. The screen will flash to display the current BPM. To exit Tap Tempo, press and hold both footswitches again.
6. Save, Tuner, Looper, & Drum
Save
Press the SAVE button to access the SAVE menu. Here, you can save effect parameters, control information, and other editable settings to a desired preset location. You can also rename the preset.
Tuner
Press the left and right footswitches together to enter the TUNER. Tuner mode can be set to Mute (for silent tuning), Bypass (for dry signal through), or Thru (for effect signal through). The tuner pitch calibration can be adjusted from 435Hz to 445Hz.
Looper
Press and hold the left and right footswitches together to enter the LOOPER. In this menu, press the left footswitch to start recording, then press it again to end recording and playback. Press the right footswitch to overdub. To stop all operations, press the right footswitch. To clear all recorded material, press and hold the right footswitch.
The looper has two modes:
- Pre Mode: Records mono audio without any effects, up to 90 seconds.
- Post Mode: Records stereo audio with effects, up to 45 seconds.
Drum Machine
Press and hold the DRUM button to enter the DRUM menu. You can set the rhythm style, speed, and volume of the drum machine. When Sync is turned on, the drum machine's speed will synchronize with the preset BPM.
7. Global Settings
Press the GLOBAL button to enter the GLOBAL menu. Use the PARA knob to select a setting item, and press the PARA knob to navigate through parameter pages.
Input/Output
- Input Level: Adjusts the input level of the instrument from -20dB to 20dB.
- No CAB (Left/Right): Bypasses the CAB module for the Matribox's left/right output channel, ignoring preset settings.
USB Audio
- Rec Level: Adjusts the volume of USB Audio recording from -20dB to 20dB.
- Monitor Level: Adjusts the volume of USB Audio monitoring from -20dB to 6dB.
- Rec Mode (Left/Right): Optional left/right channel can be set to dry signal or wet signal when USB recording.
Tap Tempo Mode
The FX1, FX2, DLY, and MOD modules can be set to force synchronization to the preset BPM, overriding individual preset settings to use the Tap Tempo function.
EXP Setting (Expression Pedal)
Press the PARA knob to enter the EXP Setting menu.
- Target: Select the expression pedal control target and specific parameters.
- EXP Range: Adjust the maximum and minimum values of the expression pedal.
- VOL Range: Adjust the range and effective position of the expression pedal for volume function.
- Calibrate: Follow the on-screen instructions to calibrate the expression pedal.
Factory Reset
Press the PARA knob to enter the Factory Reset menu. Select OK to erase all user data and restore the device to factory status.
About
The About menu displays information about the Matribox's firmware version.
8. Effect List
The Matribox features a wide array of effects categorized into different modules. Below is a detailed list of effects and their common parameters.
FX1 & FX2 Modules
| Name | Description |
|---|---|
| COMP | Based on the legendary Ross™ Compressor. |
| COMP 2 | Based on the Keeley® C4 4-knob compressor*. |
| AC Sim | Acoustic guitar simulator with 4 modes: STD (standard), Jumbo (jumbo), ENH (enhanced attack), Piezo (piezo pickup). |
| Touch-W | Control the wah sound by playing intensity. Has guitar/bass 2 modes. |
| Auto-W | Set the rate to make the wah pedal work regularly. |
| UK-W | Based on legendary VOX® V846* wah pedal. Assign Range as control target for expression pedal. |
| Cry-W | Based on legendary Dunlop® CryBaby®* wah pedal. Assign Range as control target for expression pedal. |
| Octaver | Provides polyphonic octave effect. |
| Dual Melody | Polyphonic pitch shifter/harmonizer. |
| Pitch | Polyphonic pitch shifter/harmonizer. |
| Tape Mod | Vintage tape saturation simulator providing analog warmth and natural distortion. |
| Ring Mod | A ring modulator for creating interesting inharmonic frequency spectra (like bells and chimes). |
| Filter | A 4-step auto filter machine for creating synth-like sounds. |
| Boost | Based on famous Xotic® EP Booster* pedal. |
| Skreamer | Based on legendary Ibanez® TS-808 Tube Screamer®* overdrive pedal. |
| Butter OD | Based on the legendary 2-knob yellow overdrive pedal with thick. |
| Super OD | Based on the legendary 3-knob yellow overdrive pedal. |
| Blues OD | Based on the legendary 3-knob Blues overdrive pedal providing full-range overdriven sound. |
| Dist Plus | A simple and effective distortion effect for guitars and basses. |
| JP Dist | Based on a classic orange three-knob distortion effector. |
| Shark | Based on MI Audio® Crunch Box®* distortion pedal. |
| Dark Mouse | Based on legendary ProCo™ The Rat* distortion (early LM308 OP-amp version). |
| Fuzz Cream | Based on legendary Electro-Harmonix® Big Mu Pi®* fuzz/distortion pedal. |
| Red Fuzz | Based on legendary Dallas-Arbiter® Fuzz Face®* pedal. |
| Bass Dist | Based on a yellow bass overdrive pedal with wide tonal range. |
Common Parameters for FX1 & FX2
| Parameter | Description |
|---|---|
| Sustain | Controls the effect amount. |
| Output / VOL | Controls the effect output volume. |
| Attack | Controls how soon the compressor starts to process the signal. |
| Clip | Controls the input sensitivity. |
| Body | Controls the body resonance of the AC sim. |
| Top | Controls the upper harmonics of the AC sim. |
| Sense | Controls the sensitivity. |
| Range | Controls the effect range. |
| Q | Controls the filter Q. |
| Mix/Blend | Controls the wet/dry signal ratio. |
| Depth | Controls the effect depth. |
| Rate | Controls the effect speed. |
| Low/Bass | Controls the filter low frequency range. |
| High/Treble | Controls the filter high frequency range. |
| Sync | Switches preset BPM sync on/off. |
| Low Oct | Controls the lower octave volume. |
| High Oct | Controls the higher octave volume. |
| Dry | Controls the dry signal level. |
| Wet | Controls the wet signal ratio. |
| H-Pitch | Controls the higher pitch by half notes or one notes. |
| L-Pitch | Controls the lower pitch by half notes or one notes. |
| H-Vol | Controls the high pitch volume. |
| L-Vol | Controls the low pitch volume. |
| Gain/Fuzz | Controls the gain amount. |
| H-Cut | Controls the effect high cut amount. |
| Freq | Controls the ring mod frequency. |
| Fine | Fine tune the ring mod frequency by 1Hz. |
| Tone/Filter | Controls the tone brightness. |
| Step | Controls filter center frequency of different filters (steps). |
| Bright | Switches extra brightness on/off. |
AMP Module
| Name | Description |
|---|---|
| TWD Deluxe | Based on Fender® Tweed Deluxe*. |
| B-Man N | Based on Fender® '59 Bassman®*. |
| Dark Double | Based on Fender® '65 Twin Reverb®*. |
| Calif Star CL | Based on Mesa/Boogie® Lone Star™ (CH1). |
| Voks 30N | Based on VOX® AC30HW* (normal channel). |
| Bog SV CL | Based on Bogner® Shiva* (20th Anniversary version, Ch1). |
| Jazz 120 | Based on the legendary "Jazz Chorus" solid state combo. |
| Superb CL | Based on Matchless™ Chieftain 212 combo* (clean tone). |
| Doctor CL | Based on Dr. Z® Maz 38 Sr.* combo (clean sound). |
| Brit 45 | Based on Marshall® JTM45* (normal channel). |
| Brit 50JP | Based on Marshall® JMP50* ("Jump" connection). |
| Brit 800 | Based on Marshall® JCM800* 2204. |
| Flyman B1 | Based on the famous "Brown Eye" UK style boutique amp head (BE channel). |
| Doctor OD | Based on Dr. Z Maz 38 Sr.* combo (dirty tone). |
| Bog SV OD | Based on Bogner® Shiva* (20th Anniversary version, Ch2). |
| B-Man B | Based on Fender® '59 Bassman®* (Bright channel). |
| Voks 30TB | Based on VOX® AC30HW* (Top Boost channel). |
| Supero 2 | Based on the Supro® Dual-Tone 1624T* (CH1+2, dirty tone). |
| Superb OD | Based on Matchless™ Chieftain 212 combo* (dirty tone). |
| Sol 100 OD | Based on Soldano® SLO100* (crunch channel). |
| Calif Star OD | Based on Mesa/Boogie® Lone Star (Ch2). |
| Calif IIC+ | Based on Mesa/Boogie® Mark II C+™ (Lead channel). |
| Dizzy VH | Based on Diezel® Vh4*. |
| Eng 120 | Based on ENGL® Savage 120 E610*. |
| Halen 51 | Based on Peavey® 5150® (LEAD channel). |
| Sol 100 LD | Based on Soldano® SLO100* (overdrive channel). |
| Calif IV | Based on Mesa/Boogie® Mark IV™ (Lead channel). |
| Calif DualV | Based on Mesa/Boogie® Dual Rectifier® (Vintage sound). |
| Calif DualM | Based on Mesa/Boogie® Dual Rectifier® (Modern sound). |
| Dragon LD | Based on Grindrod® Pendragon PG20C*. |
| Flyman B1+ | Based on the famous "Brown Eye" UK-style boutique amp head. |
| Tanger R100 | Based on Orange® Rockerverb 100™* (Dirty channel). |
| Bog XT Blue | Based on Bogner® Ecstasy* (Blue channel). |
| Bog XT Red | Based on Bogner® Ecstasy* (Red channel). |
| A BassVT | Based on Ampeg SVT* bass amp. |
| A BassFT | Based on Ampeg® B-15* "Flip Top" bass amp. |
| F-2Bass | Based on Alembic™ F-2B* preamp. |
| Voks Bass | Based on vintage VOX®* AC-100* bass amp. |
| Calif Bass | Based on Mesa/Boogie Bass 400* amp. |
| AC Preamp | Based on AER® Colourizer 2* acoustic preamp. |
Common Parameters for AMP Module
| Parameter | Description |
|---|---|
| VOL/Gain | Controls the amp pre gain. |
| Tone | Controls the tone brightness. |
| Cut | Counterclockwise controls the tone brightness. |
| Output/Master/VOL | Controls the amp output volume. |
| PRES | Controls the amp presence. |
| Bass | Controls the amp low frequency response. |
| Middle | Controls the amp mid frequency response. |
| Treble | Controls the amp high frequency response. |
| Bright | Switches extra brightness on/off. |
| Char | Selects from 2 gain ranges (Cool/Hot). |
| MRange | Selects mid frequency ranges. |
| Balance | Controls the tone control balance. |
| Freq | Controls the EQ center frequency. |
| EQ Q | Controls the EQ bandwidth. |
| EQ Gain | Controls the EQ boost/cut amount. |
NR Module (Noise Reduction)
| Name | Description |
|---|---|
| Gate 1 | Based on the famous ISP® Decimator™* noise gate pedal. |
| Gate 2 | Flexible noise gate with attack and release control. |
Common Parameters for NR Module
| Parameter | Description |
|---|---|
| Thre | Controls the noise gate threshold. |
| Attack | Controls how fast the noise gate starts to process the signal. |
| Rel | Controls the noise gate release time when signal level reaches. |
CAB Module (Cabinet Simulation)
| Name | Description |
|---|---|
| Supero 1x6 | Supro®* 1x6" cabinet with oval speaker. |
| TWD 1x8 | Fender® Champ* 1x8" cabinet. |
| TWD-P 1x10 | Fender® Princeton* 1x10" cabinet. |
| Bog SV 1x12 | Bogner® Shiva* 1x12" cabinet. |
| Viblux 1x12 | Fender® Vibrolux* 1x12" cabinet. |
| Voks 1x12 | VOX® AC15* 1x12" cabinet. |
| Calif 1x12 | 1980's Mesa/Boogie®* 1x12" cabinet. |
| TWD 2x12 | Custom modified Fender®* 2x12" cabinet. |
| Double 2x12 | Fender® '65 Twin Reverb* 2x12" cabinet. |
| Star 2x12 | Mesa/Boogie® Lonestar* 2x12" cabinet. |
| Rock 2x12 | Two-Rock®* 2x12" cabinet. |
| Jazz 2x12 | Legendary "Jazz Chorus" 2x12" cabinet. |
| BritGN 2x12 | Marshall® 2550* 2x12" cabinet. |
| Free 2x12 | Fryette® Deliverance* 2x12" cabinet. |
| B-Man 4x10 | Fender® "59 Bassman * 4x10" cabinet. |
| Brit75 4x12 | Marshall®* 4x12" cabinet with Celestion® G12T-75* speakers. |
| BritGN 4x12 | Marshall® 4x12" cabinet with Celestion® Greenback®* speakers. |
| BritLD 4x12 | Marshall 1960AV* 4x12" cabinet. |
| BritDK 4x12 | 1968 Marshall®* 4x12" cabinet. |
| BritMD 4x12 | Custom modified Marshall®* 4x12" cabinet. |
| Bog 4x12 | Bogner® Uberkab* 4x12" cabinet. |
| Dizzy 4x12 | Diezel®* 4x12" cabinet. |
| Eng 4x12 | ENGL®* 4x12" cabinet. |
| Halen 4x12 | Peavey® 6505* 4x12" cabinet. |
| Sol 4x12 | Soldano®* 4x12" cabinet. |
| Calif 4x12 | Mesa/Boogie® Road King®* 4x12" cabinet. |
| Dual 4x12 | Mesa/Boogie® Rectifier®* 4x12" cabinet. |
| WAM 4x12 | WEM 4x12* cabinet with four 12-inch Fane* speakers. |
| Tanger 4x12 | Orange® PPC412* 4x12" cabinet. |
| Watt 4x12 | Hiwatt® SE4123* 4x12" cabinet. |
| Calif 2x10 | Mesa/Boogie®* 2x10" bass cabinet. |
| Work 4x10 | SWR® Workingman's* 4x10" bass cabinet. |
| A Bass 4x10 | Ampeg SVT-410HE* 4x10" bass cabinet. |
| A Bass 8x10 | Ampeg SVT-810E* 8x10" bass cabinet. |
| D | Dreadnought guitar simulation. |
| OM | Simulates an OM type acoustic guitar. |
| Jumbo | Simulates a jumbo acoustic guitar. |
| GA | Simulates a GA type acoustic guitar. |
Common Parameters for CAB Module
| Parameter | Description |
|---|---|
| VOL | Controls the output volume. |
EQ Module (Equalizer)
| Name | Description |
|---|---|
| Guitar EQ | Equalizer designed for guitars. |
| Bass EQ | Equalizer designed for bass. |
Common Parameters for EQ Module
| Parameter | Description |
|---|---|
| XX Hz | Boosts/cuts the frequency band. |
| VOL | Controls the output volume. |
MOD Module (Modulation Effects)
| Name | Description |
|---|---|
| Chorus A | Based on legendary Arion® SCH-1* stereo chorus pedal. |
| Chorus B | Based on the legendary huge ensemble chorus pedal born in late 1970s (chorus mode). |
| Detune | A detuning effect combining a slightly shifted signal with the original to create a chorus-like tone. |
| Flanger | Classic flanger effect, producing rich and natural flanger tone. |
| Phaser | Based on legendary MXR® M101 Phase 90*. |
| Vibrato | BBD-based blue vibrato pedal, producing natural analog vibrato sound. |
| Vibe | Based on Voodoo Lab® Micro Vibe*. |
| Tremolo | Based on legendary Demeter® TRM-1Tremulator*, offering classical opto tremolo sound. |
| Sine Trem | Sine tremolo waveforms and super wide tonal range. |
| Bias Trem | Bias tremolo waveforms and super wide tonal range. |
Common Parameters for MOD Module
| Parameter | Description |
|---|---|
| Depth | Controls the effect depth. |
| Rate | Controls the effect speed. |
| Tone | Controls the tone brightness. |
| VOL | Controls the effect output volume. |
| Detune | Controls the detune amounts by 1 cent. |
| Wet | Controls the wet signal level. |
| Dry | Controls the dry signal level. |
| Pre Delay | Controls the pre delay time. |
| FdBk | Controls the feedback amount. |
| Bias | Controls the waveform offset amount. |
| Sync | Switches preset BPM sync on/off. |
DLY Module (Delay Effects)
| Name | Description |
|---|---|
| Warm | Based on the legendary 3-knob BBD analog delay pedal with "REPEAT RATE" control. |
| Pure | Produces pure, precise delay sound. |
| Mag | Simulates solid-state tape echo sound. |
| Tube | Simulates tube-driven tape echo sound. |
| 999 Echo | Based on Maxon® AD900 Analog Delay*. |
| Reverse | Produces a special delay effect with reversed feedback. |
| Slap | Simulates the classic slapback echo effect. |
| Rack | Reproduces the sound of a vintage 1980's rack-mount delay machine with slightly sample-reduced feedback. |
| Sweep | Produces a delay effect with sweeping filter modulated repeats. |
| Ping Pong | A ping-pong delay producing stereo feedback bounces back and forth between left and right channels. |
| Tape | Simulates multi tape delay sound. |
Common Parameters for DLY Module
| Parameter | Description |
|---|---|
| Mix | Controls the wet/dry signal ratio. |
| Time | Controls the delay time. |
| Fdbk | Controls the feedback amount. |
| Mod | Controls the modulation amount. |
| Tone | Controls the effect tone brightness. |
| S-Depth | Controls the sweeping depth. |
| S-Rate | Controls the sweeping speed. |
| Sync | Switches preset BPM sync on/off. |
| Trail | Switches effect trail on/off. |
RVB Module (Reverb Effects)
| Name | Description |
|---|---|
| Plate | Simulates the sound character produced by a vintage plate reverberator. |
| Spring | Simulates the sound character produced by a vintage spring reverberator. |
| Sky | Special-tuned reverb effect with lush, bright decays. |
| Sea | Special-tuned reverb effect with huge, deep decays. |
| Mod RVB | Produces a modulated reverb effect that is lush and sweet. |
Common Parameters for RVB Module
| Parameter | Description |
|---|---|
| Mix | Controls the wet/dry signal ratio. |
| Pre Delay | Controls the pre delay time. |
| Decay | Controls the reverb decay time. |
| H-Damp | Controls the high cut amount. |
| Tone | Controls the effect tone brightness. |
| Lo End | Controls the effect low frequency amount. |
| Hi End | Controls the effect high frequency amount. |
| Trail | Switches effect trail on/off. |
9. Software
Connect the Matribox to your computer and access the free software to manage your device. This software allows you to adjust tonal settings, transfer files, update firmware, restore settings, and upload third-party IR files. Matribox software is compatible with Windows and macOS platforms.
Visit www.sonicake.com/products/matribox to download the software for free.
10. Troubleshooting
Device Won't Turn On
- Make sure the power supply is properly connected.
- Check if the power adapter is working properly.
- Check if you're using the correct power adapter.
No Sound Or Slight Sound
- Make sure your cables are connected properly.
- Make sure the volume knob is adjusted properly.
- When the expression pedal is used for volume control, check its position and volume settings.
- Check the effects module volume settings.
- Check the preset volume settings.
- Make sure your input device is not muted.
Noise
- Make sure your cables are connected properly.
- Check your instrument output jack.
- Check if you're using the correct power adapter.
- If the noise is coming from your instrument, try using the noise reduction module to adjust it.
Sound Problems
- Make sure your cables are connected properly.
- Check your instrument output jack.
- If you're using this device with other pedals, check to see if other pedals are set up properly.
- Check your effects parameter setup. If effects are set to extremes, Matribox may only emit noise.
Problems With Expression Pedal
- Check your expression pedal on/off settings.
- Try calibrating the pedal.
11. Specifications
Technical Specifications
| Feature | Detail |
|---|---|
| A/D/A Converter | 24-bit high performance audio |
| Sampling Frequency | 44.1 kHz |
| SNR | 110dB |
| Maximum Simultaneous Effects | 9 |
| Preset Memory | 99 User Presets/99 Factory Presets |
| Looper | 90 seconds of record time |
| Drum Machine | 100 Patterns |
Analog Input Connections
| Input | Specification |
|---|---|
| Guitar Input | 1/4" Unbalanced (TS), 1M Ohms |
| Aux Input | 1/8" Stereo (TRS), 10k Ohms |
Analog Output Connections
| Output | Specification |
|---|---|
| Left/Right Outputs | 1/4" Unbalanced (TS), 1k Ohms |
| Headphone Output | 1/8" Stereo (TRS), 47 Ohms |
Digital Connections
| Connection | Detail |
|---|---|
| USB Port | USB 2.0 Type-C Port |
USB Recording Specification
| Feature | Detail |
|---|---|
| Sample Rate | 44.1 kHz |
| Bit Depth | Supports 16-bit or 24-bit |
Size and Weight
| Feature | Detail |
|---|---|
| Dimensions (W x D x H) | 200mm x 137.5mm x 53.6mm |
| Unit Weight | 732g |
Power
| Feature | Detail |
|---|---|
| Power Requirements | DC 9V center negative, 500mA |
12. User Tips
- Explore Presets: The Matribox comes with many good factory presets. Experiment with them to find sounds you like before diving into deep customization.
- Use the App: While the on-device controls are functional, the dedicated Windows/macOS software provides an easier and more visual way to adjust tonal settings, transfer files, and manage presets.
- Check YouTube: If you find the manual's explanations lacking, many users recommend referring to YouTube tutorials for practical demonstrations and tips on how to use the Matribox effectively.
- Beginner-Friendly: This pedal is highly recommended for beginners due to its ease of use and comprehensive features for its price point.
- Bass Guitar Compatibility: The Matribox can also be used effectively with bass guitars, producing good sound.
- NAM Profiles: With firmware 1.10, you can store up to 5 user NAM profiles, expanding your tonal possibilities.
- Calibrate Expression Pedal: If you experience issues with the expression pedal, try calibrating it through the Global settings menu.
- Power Adapter: Ensure you use the correct DC 9V center negative 500mA power adapter to avoid damage. If the included power cord is not suitable for your region (e.g., European plug), consider purchasing a compatible one.
13. Warranty & Support
For any malfunction, disconnect the AC adapter and turn the power OFF immediately. Then, disconnect all other connected cables. Prepare information including the model name, serial number, and specific symptoms related to the malfunction.
For support inquiries, please contact SONICAKE support at support@sonicake.com.
A user manual in PDF format is also available for download: View User Manual (PDF)