Introduction
This manual provides detailed instructions for the safe and efficient operation of your T&G TG365 Portable Wireless Bluetooth Speaker. Please read this manual thoroughly before use and retain it for future reference.
The T&G TG365 is a versatile portable speaker featuring Bluetooth 5.3 connectivity, FM radio, TF card and USB playback, AUX input, and TWS (True Wireless Stereo) function for pairing two speakers. It also includes a built-in microphone for hands-free calling and LED lighting effects.
Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Keep the speaker away from water and other liquids, although it is waterproof, prolonged submersion is not recommended.
- Do not attempt to disassemble or modify the speaker. This will void the warranty and may cause damage.
- Use only the specified charging voltage (5V/500mA) to prevent damage to the battery.
- Keep out of reach of children.
- If the speaker crashes during use, you can press and hold the power button for 8 seconds to reset and shut down.
Package Contents
Please check that all items are present:
- T&G TG365 Portable Wireless Bluetooth Speaker
- Micro USB Charging Cable
- AUX Audio Cable
- User Manual (this document)
Product Overview
The T&G TG365 speaker features a cylindrical design with controls and ports located on the side. The speaker is available in various colors including black, red, grey, pink, green, and camouflage.
Controls and Ports:
- DC 5V Charging Port (Micro USB): For charging the speaker.
- TF Card Slot: For playing MP3 audio from a TF card.
- USB Slot: For playing MP3 audio from a USB drive.
- AUX Line-in Slot: For connecting external audio devices via a 3.5mm audio cable.
- Power Button: Long press to power on/off.
- Play/Pause Button: Short press to play/pause music. In FM mode, short press to auto-search stations.
- Volume Down / Previous Track Button (-): Short press for previous track, long press for volume down.
- Volume Up / Next Track Button (+): Short press for next track, long press for volume up.
- Mode Button (M): Double press to switch function modes (TF card, USB, Wireless, AUX, FM). Short press to cycle LED light modes, triple press to turn LED lights off/on.
Specifications
| Feature | Specification |
|---|---|
| Wireless Version | V5.3 |
| Wireless Transmission Range | Up to 10 meters (<33 feet) |
| SNR (Signal-to-Noise Ratio) | ≥90dB |
| Battery Capacity | Approx. 1200mAh |
| Built-in Voltage | 3.7V |
| Normal Playback Time | Approx. 3 hours (varies with audio content and volume) |
| Speaker Driver Size | 45mm * 2 |
| Speaker Power | 4Ω/5W * 2 (Total 10W PMPO) |
| Frequency Response | 120Hz-20KHz |
| Unit Dimensions (L x W x H) | 66mm x 68mm x 171.5mm (approx. 2.6 x 2.7 x 6.75 inches) |
| Unit Weight | Approx. 348g (excluding accessories) |
| Charging Voltage | 5V/500mA |
| Charging Time | Approx. 3 hours |
| Waterproof | Yes |
| Audio Crossover | Full-Range |
| Built-in Microphone | Yes |
| Input/Output | TF Card, AUX, Bluetooth, Audio Line, Wireless |
Setup
1. Initial Charging
- Before first use, fully charge the speaker.
- Connect the Micro USB charging cable to the DC 5V charging port on the speaker and the other end to a USB power adapter (not included) or a computer USB port.
- The charging indicator light will illuminate. Charging takes approximately 3 hours.
- Once fully charged, disconnect the charging cable.
2. Power On/Off
- To Power On: Press and hold the Power button (⑤ in Figure 2) for a few seconds until you hear a prompt sound and the LED lights illuminate.
- To Power Off: Press and hold the Power button again for a few seconds until the speaker powers down.
Operating Instructions
1. Bluetooth Pairing (Wireless Mode)
- Ensure the speaker is powered on and in Wireless (Bluetooth) mode. If not, double-press the Mode (M) button to cycle through modes until you hear the Bluetooth prompt.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "TG365" from the list of devices.
- Once paired, you will hear a confirmation sound. The speaker is now ready to play audio from your device.
- If no device is connected, the speaker will automatically turn off after 30 minutes.
2. TWS (True Wireless Stereo) Function
The TWS function allows you to pair two TG365 speakers together for a stereo sound experience.
- Ensure both TG365 speakers are powered on and in Wireless (Bluetooth) mode, but NOT connected to any mobile device.
- On one of the speakers, press and hold the Mode (M) button for 2-3 seconds until you hear a hint sound. The two speakers will automatically pair with each other.
- Once paired, you can connect your mobile device to one of the speakers via Bluetooth as described in "1. Bluetooth Pairing". Both speakers will now play audio in stereo.
- To disconnect TWS, press and hold the Mode (M) button on either speaker for 3 seconds.
3. FM Radio Mode
- Double-press the Mode (M) button to switch to FM Radio mode.
- To automatically search for stations, short press the Play/Pause button. The speaker will scan and save available stations.
- To stop the automatic search, short press the Play/Pause button again.
- Use the Previous Track (-) and Next Track (+) buttons to navigate between saved stations.
- Tip: For better FM reception, connect the AUX audio cable to the AUX line-in slot; it acts as an external antenna.
4. TF Card / USB Playback Mode
- Insert a TF card or USB drive (formatted to FAT32) containing MP3 audio files into the respective slot.
- The speaker will automatically switch to TF card or USB playback mode and begin playing music. If it doesn't, double-press the Mode (M) button to cycle to the correct mode.
- Use the Play/Pause button to control playback.
- Use the Previous Track (-) and Next Track (+) buttons to change tracks.
5. AUX Line-in Mode
- Connect one end of the 3.5mm AUX audio cable to the AUX line-in slot on the speaker.
- Connect the other end to the audio output jack of your external device (e.g., computer, MP3 player).
- The speaker will automatically switch to AUX mode. If it doesn't, double-press the Mode (M) button to cycle to AUX mode.
- Audio playback is controlled via your external device.
6. Hands-Free Call Function
When the speaker is paired with your mobile phone via Bluetooth:
- Answer Call: Short press the Play/Pause button when an incoming call rings.
- End Call: Short press the Play/Pause button again during a call.
- Redial Last Number: Double-press the Play/Pause button.
7. LED Light Modes
- The speaker features various flashing LED lights that synchronize with the music melody.
- Change LED Mode: Short press the Mode (M) button to cycle through different LED light patterns.
- Turn LED On/Off: Triple press the Mode (M) button to turn the LED lights off or on.
8. Volume and Track Control
- Volume Up: Long press the Next Track (+) button.
- Volume Down: Long press the Previous Track (-) button.
- Next Track: Short press the Next Track (+) button.
- Previous Track: Short press the Previous Track (-) button.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect to a power source and try again. |
| Cannot pair via Bluetooth. | Ensure the speaker is in Bluetooth mode and not connected to another device. Turn off and on Bluetooth on your device. Move closer to the speaker. |
| No sound or low volume. | Check the volume levels on both the speaker and your connected device. Ensure the correct input mode is selected (Bluetooth, AUX, TF, USB). |
| FM radio reception is poor. | Connect the AUX audio cable to the AUX line-in slot; it acts as an external antenna to improve signal strength. |
| Speaker crashes or freezes. | Press and hold the Power button for 8 seconds to perform a hard reset and shut down the speaker. Then power it on again. |
| TF card/USB drive not recognized. | Ensure the card/drive is formatted to FAT32 and contains MP3 audio files. Reinsert the card/drive. |
User Tips
- TWS Pairing: Users have found the TWS pairing process simple and effective for connecting two speakers for stereo sound.
- Sound Quality: While the sound is generally good for the price, some users note that the aesthetics and feel of the speaker might exceed its audio performance.
- Portability: The speaker's compact size makes it very practical for carrying around.
- Value: Many users appreciate the product's value for money, especially considering its features and sound output.
Frequently Asked Questions (FAQ)
- Q: Can two TG365 speakers be used in TWS mode?
- A: Yes, the TG365 supports TWS (True Wireless Stereo) mode, allowing you to pair two speakers for a stereo audio experience. Refer to the "TWS Function" section for detailed instructions.
- Q: What is the battery capacity of the TG365 speaker?
- A: The battery capacity is approximately 1200mAh.
Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support or further assistance, please contact the seller or refer to the official product page. A detailed user manual in PDF format is available for download from the product's official page: View User Manual (PDF).