ToolKitRc M7

Contents

ToolkitRC M7 Multi-functional Charger User Manual

Model: M7

ToolkitRC M7 Charger Front View with Screen and Box

ToolkitRC M7 Multi-functional Charger

1. Introduction

Thank you for purchasing the M7 model tool chain product. Please read this manual carefully before using it to ensure the best experience.

Product Description

The M7 is a multifunctional tool chain product that integrates functions such as a balanced charger and discharger, an electric display, a signal measuring device, and a signal source. It offers comprehensive battery management and testing capabilities.

Key Features:

  • Battery Management: Charges, discharges, and balances LiPo, LiHV, LiFe, Lion (1-6S), NiMh (1-16S), and PB (1-10S) batteries.
  • Charging/Discharging Power: Max 10A @ 200W charge current. Discharge modes include Recycle (Max 10A @ 200W), External (Max 10A @ 200W), and Internal (Max 3A @ 10W).
  • Adjustable Settings: Lithium battery cut-off voltage (TVC function), customizable constant voltage (1-28V) and constant current (1-10A) output.
  • Measurement Tools: Measures battery voltage, internal resistance, and performs lithium battery balance management.
  • Signal Analysis: Measures PWM/PPM/SBUS signal values with 1 microsecond accuracy.
  • Signal Output: Outputs PWM/PPM/SBUS standard signals with 1 microsecond accuracy.
  • ESC Test: Integrated ESC testing function.
  • USB Output: USB 2.1A@5.0V output for charging mobile devices.
  • Firmware Upgrade: Supports multi-language system and firmware upgrades via USB.

2. Safety Information

Please read and understand all safety instructions before use.

  1. Input Voltage: The M7 allows an input voltage of 7-28V. Ensure the power supply voltage is consistent and pay close attention to the positive and negative polarity when connecting.
  2. Environment: Do not use this product in environments with excessive heat, humidity, flammable gases, or explosive gases.
  3. Supervision: Always use this product under supervision to prevent accidents.
  4. Power Disconnection: When not using the product, unplug the input power promptly.
  5. Charging Current: When using the charging function, set a current that matches the battery. Do not set an excessive current to avoid damaging the battery.
M7 Charger Box with 14+ Ages Warning

Safety warning on product packaging.

3. M7 Layout

Familiarize yourself with the different parts of your ToolkitRC M7 charger.

M7 Layout Diagram (Front View)

Front View: Display, Scroll Wheel (Turn: left/right, Press: OK), Exit button, Output port, Balance port.

M7 Charger Rear View with Cooling Fan

Back View: Input port, Signal port, Cooling fan, USB Output & Upgrade port.

4. Setup (Quick Start)

Follow these steps to quickly get your M7 charger ready for use.

  1. Connect Power: Connect a 7-28V DC power supply to the input port on the back of the M7.
  2. Boot Up: The display will show the boot logo for 2 seconds, accompanied by a do-re-mi boot sound.
  3. Main Interface: After booting, the screen will enter the main interface, displaying current status (e.g., 19.80V, 0.0Wh, 35.0°C, 0.00V, 0.00A, 0mAh).
  4. Auxiliary Functions: Long press the [Exit] button to enter the auxiliary function interface. Scroll the [Scroll Wheel] to navigate pages.
  5. Select Task: When the charger is idle, short press [OK] to select a charging task. You can adjust and finish the work while the charger is operating.
  6. System Settings: Long press [OK] to enter the system setting interface.
  7. Confirm/Exit: Short press the [Scroll Wheel] once to confirm a function. Short press [Exit] to end modifications or return to the previous interface.
  8. Delete Key: Long press the [Scroll Wheel] for 2 seconds to activate the delete key function.
  9. Feedback: A 'didi' sound indicates successful operation of any key.

5. Operating Instructions

5.1. Charge and Discharge Settings

From the main interface, short press [OK] to enter the charging function. You can also access battery selection from system settings.

  1. Battery Type Setting:
    • Scroll the [Scroll Wheel] to select an existing battery profile or create a new one (up to 32 profiles). Press [Enter] to access settings.
    • Supported types: LiPo, LiHV, LiFe, Lion, NiMh, PB, and Smart Battery mode.
    • Warning: Choosing the wrong battery type can damage the battery, charger, and cause burns. Use caution.
  2. Cells Setting:
    • Move cursor to [Battery Section] and press [OK] to modify cell count (1S to 6S).
    • Set to [Auto] for automatic cell identification based on battery voltage.
    • Tip: If the battery is over-discharged or over-charged, manual cell setting may be required. Connecting Lixx batteries to the balance port improves accuracy.
  3. Work Mode:
    • Select [Mode] and press [OK] to choose: Charge, DisCHG (Discharge), StoCHG (Storage).
    • NiMh batteries also offer a Cycle mode.
  4. Discharge Mode: (Available in discharge, storage, or cycle modes)
    • Inter (Internal): Discharges via internal heat consumption (max 3.0A@10W).
    • Recycle: Recovers power to the input battery (max 10.0A@200W).
    • External: Discharges through an external load connected to the input port (max 10.0A@200W).
  5. Input MaxVoltage: (For Recycle discharge mode)
    • Set the maximum input voltage. Discharge stops if this value is reached.
    • Tip: Set this to the highest protection voltage of your power supply.
  6. End Voltage Setting (TVC):
    • Modify the single-cell end voltage. For charging, it's the charge cut-off voltage (±50mV of full voltage). For discharging, it's the discharge cut-off voltage.
    • Only LiPo, LiHV, LiFe batteries support TVC.
  7. Current Setting:
    • Adjust Charge Current or DisCHG Current (up to 10.0A).
    • Tip: Set charging rate to 1-2C of battery capacity (e.g., 2000mAh battery = 2.0-4.0A).
  8. NiMh Setting (PeakV):
    • For NiMh batteries, set the negative pressure value (5mV-15mV) when fully charged.
  9. Cycle Setting: (For NiMh batteries in Cycle mode)
    • Set Cycle times (2-12) and Rest time (2-10 minutes).
  10. External Load Setting: (For External discharge mode)
    • Set the wattage according to the external load used.
  11. Smart Battery Setting: (For UAV battery type)
    • Select drone type (e.g., Mavic2, Phantom) and Max current (0.5A-10A).

5.2. Charge and Discharge Work

Once charging or discharging begins, the charger enters the working interface, displaying real-time data.

  • Display Navigation: Rotate the [Scroll Wheel] to switch between bottom status information, internal resistance voltage values, and general information.
  • Dynamic Control: Short press [OK] to dynamically set the working current or stop the operation.
  • Completion/Error: A prompt box with sound will appear upon completion or if an error occurs.
  • Automatic Continuation: If set, the charger can automatically continue charging/discharging the next battery after a fully charged one is removed and a new one is connected within 2 seconds.

5.3. Accessibility (Auxiliary Functions)

Long press [Exit] from the main interface to access auxiliary functions.

  1. Measure Resistance: Short press [OK] to test the internal resistance of the connected battery.
  2. Measure Signal: Test PWM, PPM, or SBUS signals. Scroll [Scroll Wheel] to select signal type.
  3. Signal Output: Output PWM, PPM, or SBUS signals. Set mode (manual, auto 1/2/3), pulse width (800-2200us), and cycle (2.5ms-50.0ms).
  4. ESC Test: Enter ESC test mode. Adjust pulse width and cycle.
  5. Power (Adjustable Power Supply): Set output voltage and current. Short press [OK] to start power output.

5.4. System Settings

Long press [OK] from the main interface to enter system settings.

  • Input Settings: Power selection (P1/P2/P3), power type (Battery/Adapter), Max power (350W), Max current (12.0A), Voltage range (7.0-28.0V).
  • Security Settings: Safe Inter. Temp. (80°C), Safe Exter. Temp. (60°C), Safe time (200Min), Safe capacity (30Ah). These values trigger output shutdown if exceeded.
  • Continuous Work: Enable/disable automatic continuation after battery replacement.
  • Work Completed: Choose between stopping or trickle charging after work is done.
  • Battery Selection: Option to open/close the battery selection interface.
  • Backlight: Adjust backlight brightness (1-10).
  • Buzzer: Adjust buzzer tone or turn off.
  • Language: Select system display language (English, Chinese, etc.).
  • Theme Style: Set light or dark themes.
  • Default: Restore all settings to factory values.
  • ID: Displays independent ID for the device.

6. Maintenance

  • General Care: Keep the device dry and clean. Avoid exposing it to extreme temperatures or direct sunlight. Do not drop or subject it to strong impacts.
  • Firmware Upgrade: Regularly check the official ToolkitRC website for firmware updates. Connect the M7 to a computer via the USB data cable. The computer will recognize a U disk named 'Toolkit'. Download the `app.upg` file from the official website and overwrite the file in the U disk to upgrade the firmware.
  • Fan Operation: The cooling fan operates at half-speed when internal temperature exceeds 45°C to reduce noise, and at full-speed above 53°C for enhanced heat dissipation. Ensure the fan vents are clear.
  • Voltage Calibration: In the shutdown state, press and hold the [Scroll Wheel], then connect the power supply. The system will enter manual voltage calibration. Use a voltmeter to measure actual battery voltage and adjust the M7's displayed value to match for accurate calibration.

7. Troubleshooting

  • Display shows 0.12V without load: This appears to be a common characteristic of the M7. If the device functions correctly otherwise, it is likely within specifications.
  • Charger stuck or not responding: This can often be resolved by performing a firmware update. Download the latest firmware from the official ToolkitRC website and follow the upgrade instructions in the Maintenance section.
  • Incorrect battery cell identification: If the connected battery is over-discharged or over-charged, the charger might incorrectly identify the cell count. Manually set the correct number of cells in the 'Cells Setting' menu. Connecting Lixx batteries to the balance port can also improve identification accuracy.
  • Charger not powering on: Ensure the input power supply is within the 7-28V range and correctly connected with the correct polarity. Check the power supply itself.
  • Battery not charging/discharging: Verify that the correct battery type and work mode are selected. Check the connections to the battery (main port and balance port if applicable). Ensure current limits are set appropriately.

8. Specifications

CategoryParameterValue
InputVoltage7-28V @ MAX12A
ChargingBattery TypeLiPo, LiHV, LiFe, Lion (1-6S); NiMh (1-16S); Pb (1-10S)
Balance Current400mA @ 2-6S
Accuracy<0.005V
Charge Power0.1-10A @ 200W
Discharge Power0.1-10A @ 250W (Recycle Mode); 0.1-3A @ 12W (Internal Mode)
USB Output2.1A @ 5V (upgrade @ USB3.0)
Voltage1.0V-5.0V @ 1-6S
Internal Resistance1-100mR @ 1-6S
MeasuringPWM880us-2200us @ 20-400Hz
PPM880us-2200us * 8 CH @ 20-50Hz
SBUS880us-2200us * 16 CH @ 20-100Hz
OutputPWM500us-2500us @ 20-1000Hz
PPM880us-2200us * 8 CH @ 50Hz
SBUS880us-2200us * 16 CH @ 74Hz
Power Mode1-10A @ 1-28V (CC+CV)
DisplayLCDIPS 2.0 inch, 320*240 resolution
ProductSize73mm * 51mm * 27mm
Weight90g
Individual PackingSize84mm * 79mm * 39mm
Weight150g
M7 Charger Box with Detailed Specifications

Detailed specifications also found on product packaging.

9. Warranty & Support

For further information, news, firmware updates, and support, please visit the official ToolkitRC website:

www.toolkitrc.com

You can also refer to the original user manual provided in PDF format for detailed diagrams and instructions. A PDF version of this manual may be available from the seller or on the ToolkitRC website.

10. User Tips

  • Intuitive Interface: Users praise the M7 for its clear screen and very easy-to-use, intuitive interface.
  • Versatile Power Source: Beyond charging, the M7 can function as a voltage and current source, which is highly useful for various hobby applications.
  • On-Site Balancing: The M7 is noted as a reliable tool for balancing batteries directly in the field.
  • Battery Revival: Many users have successfully brought old or problematic battery packs back to life using the M7's various charging and balancing functions.
  • Firmware Updates: Always update to the latest firmware from the official website. Updates often add more functions, battery types, and improve performance.
  • Power Tool Battery Packs: If you frequently use power tools, the M7 is considered an essential item for managing and maintaining their battery packs.
  • Laptop Charging: The charger can upscale voltage, allowing it to charge batteries even from a laptop power supply, which is convenient.
  • Lipo Control: It's considered a very good investment for precise control and management of LiPo batteries.
  • Servo Testing: The built-in connection for testing servos is a practical added feature.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.