1. Introduction
The CYCPLUS G1 is a compact and easy-to-use GPS bike computer designed to provide essential cycling data. With its wireless operation and GPS accuracy, it tracks your speed, distance, time, and more, helping you monitor your rides effectively. This manual will guide you through the setup, operation, and maintenance of your G1 device.
Figure 1: CYCPLUS G1 GPS Bike Computer
2. Package List
Please check the contents of your package to ensure all items are present:
- CYCPLUS G1 Bike Computer x1
- Bike Computer Mount x1
- Rubber Pad x1
- Instruction Manual x1
- Rubber Band x4
- Micro USB Charging Cable x1
Figure 2: Package Contents
3. Setup and Installation
Follow these steps to install your CYCPLUS G1 bike computer:
- Attach the Bike Computer Mount: Place the rubber pad on your handlebar or stem where you intend to mount the computer. Position the bike computer mount on top of the rubber pad.
- Secure the Mount: Use the provided rubber bands to cross-fix the mount to your handlebar or stem. Ensure the mount is stable and securely fastened.
- Install the Bike Computer: Align the CYCPLUS G1 bike computer with the mount and twist it clockwise until it locks into place.
Figure 3: Two-Step Easy Installation
Video 1: Product Installation and Feature Overview
4. Operating Instructions
4.1. Functions
The CYCPLUS G1 supports the following functions:
- GPS Speed Measurement: Displays Current, Maximum, and Average Speed.
- Data Display: Shows Riding Time, Riding Distance, Total Riding Time, Odometer (ODO), Current Time (O'clock), and Altitude.
- Customizable Settings: Allows setting of ODO, Time Zone, and Measurement Units.
- Factory Reset: Option to restore default settings.
- Automatic Sleep Mode: The device will automatically enter sleep mode after 10 minutes of inactivity to conserve battery. When turned back on, it will display your last cycling data.
Figure 4: Supported Data Types
4.2. Button Operations
The device has two buttons: a Power button (left) and a Setting button (right).
| State | Action | Power Button (Left) | Setting Button (Right) |
|---|---|---|---|
| Off | Short Press | Turn On | - |
| On | Short Press | Switch Speed Display (Current/Average/Max) | Switch Data Display (Time/Distance/Total Time/Odometer/Clock/Altitude) |
| On | Long Press | Turn Off | Enter/Exit Settings Menu |
4.3. Settings Menu
The settings menu allows you to customize various parameters of your G1 bike computer. There are four main settings: C4 (Time Zone), C6 (Units), C7 (Factory Reset), and C8 (Odometer Setting).
- Entering Settings: From the main display, long press the Setting button to enter the settings mode.
- Navigating Settings: Short press the Setting button to cycle through the setting menus (C4, C6, C7, C8).
- Adjusting Settings:
- C4 (Time Zone Setting): When C4 is displayed, short press the Power button to confirm. The digit will blink. Short press the Setting button to change the value, then short press the Power button to confirm.
- C6 (Unit Setting): When C6 is displayed, short press the Power button to confirm. The unit will blink. Short press the Setting button to select the desired unit (km/h or mph), then short press the Power button to confirm.
- C7 (Factory Reset): When C7 is displayed, short press the Power button to confirm. When