1. Safety Instructions
Warnings
- The body of the shaver can be cleaned with water only after being disconnected from the charging cable.
- Do not disassemble the body to replace the battery.
- Always hold the plug when plugging in or unplugging the charging cable. Never directly pull the cable.
- Do not charge this shaver for extended periods of time while leaving it unattended, and do not charge it longer than 24 hours.
- This shaver contains a built-in rechargeable battery, and should never be exposed to fire, nor charged, used, or stored in high-temperature environments.
- Do not place or insert any foreign objects into this shaver.
- Do not modify or repair this shaver yourself.
- Detach the hand-held part from the supply cord before cleaning it in water.
Precautions
- Immediately stop using the charging cable if it is damaged or working improperly.
- If the charging cable is damaged, it must be replaced with a genuine charging cable purchased from the manufacturer or after-sales service department.
- Keep this shaver out of reach of children.
- Make sure the charging port is dry when charging.
- Use a 5 V charger when charging.
- Fully charge the shaver at least once every six months, if it will not be used for an extended period of time.
Notes
- This shaver is intended for indoor use only.
- This shaver is intended for use by a single individual only.
- When traveling, make sure to install the protective cover and enable the travel lock to protect the shaver.
- It is recommended to charge, use, and store this shaver at temperatures between 5°C to 35°C.
- Do not wrap the charging cable around the shaver to avoid damage to the cable.
- This shaver is only suitable for facial hair, and is not recommended to be used to shave one's head or other parts of the body.
- This shaver meets the IPX7 standards for waterproofing and can be cleaned with water. However, it should not be immersed in water for an extended period of time.
- It is normal for water to drip through the gaps of the body when rinsing the shaver. However, this poses no danger since all electronic components are enclosed in an independent waterproof compartment inside the shaver. Standing it upright can help get rid of the water quickly.
- This shaver is not intended for use by people (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they are under the supervision of or have been given instructions concerning the use of the shaver by a person responsible for their safety.
2. Product Overview
The XIAOMI MIJIA S500 Electric Shaver features a triple-blade floating head design for a close and comfortable shave. It supports both dry and wet shaving and is fully washable. The device includes a battery level indicator and a travel lock function.

Front view of the XIAOMI MIJIA S500 Electric Shaver.
Components

Diagram illustrating the main components of the shaver: Protective Cover, Shaving Head, On/Off Button, Body, User Manual, Cleaning Brush, Info Card, Charging Cable, and Charging Port.
- Protective Cover: Protects the shaving head when not in use or during travel.
- Shaving Head: Features three omni-directional floating blades for a close shave.
- On/Off Button: Powers the shaver on or off and switches between speed modes.
- Body: The main housing of the shaver.
- Indicators: Display speed, travel lock status, clean/error alerts, and battery level.
- Charging Port (Type-C): Used to charge the shaver. Ensure it is dry before charging.
- Cleaning Brush: For removing stubble buildup from the shaving head.
3. Operating Instructions
Basic Operation
- Turning On/Off: Press the button to turn the shaver on/off. When turned on, the battery level indicator will display, and other indicators (clean/error, travel lock, speed) will sequentially turn on and off. All indicators go off when the shaver is turned off.
- Switching Speed Modes: When the shaver is on, press and hold the button for 1 second to switch between speed mode (speed indicator on) and standard mode (speed indicator off).
Shaving Technique
It is normal for skin to be slightly irritated after initial shaves. Regular use (at least 3 times a week for 3 weeks) helps skin adapt.
- Apply gentle pressure while shaving your face in circular motions.
- It is not necessary to repeatedly shave the same area for a clean shave.
- For optimal results, shave dry.

Illustration of circular shaving motion for effective hair removal.
Note: Improper use can damage the shaving head and blades. Always check the shaving head and blades for integrity before use. Stop using immediately if damaged.
4. Travel Lock
The shaver is equipped with a travel lock to prevent accidental activation when stored in luggage.
Enabling the Travel Lock
- When the shaver is turned off, press and hold the button for 3 seconds.
- The travel lock indicator will turn on for 3 seconds, then go off, indicating it is enabled.
Disabling the Travel Lock
- If the travel lock is enabled, pressing the button will cause the travel lock and battery level indicators to blink.
- To disable, press and hold the button for 3 seconds. The travel lock and battery level indicators will blink and go off, and the shaver will turn on.

Illustration of the shaver with the travel lock icon displayed, indicating the feature is active.
5. Battery Level Indication
To charge the shaver, connect the charging cable (Type-C) to the shaver and an adapter (USB-A).

Close-up of the USB-C charging port on the shaver.
Charging Status
- While charging, the battery level indicator will blink slowly, and the number will increase.
- Once fully charged, the indicator will display 100% and stop blinking.

The shaver's display showing 38% battery charge.

The shaver's display showing 100% battery charge, indicating a full charge.
Battery Level Table
| Battery Level | Indicator Status |
|---|---|
| 100-5% (While Using) | On |
| <5% (While Using) | Blinking |
| 0% (While Using) | Unable to turn on |
| 0-100% (While Charging) | Blinking slowly |
| 100% (While Charging) | On |
The shaver supports plug-and-play, allowing use during charging when the battery is low. However, never use the shaver in the shower when the charging port is wet during charging.
6. Cleaning & Maintenance
For optimal performance, clean the shaver regularly. The clean/error indicator will blink for 5 seconds after turning on, and every 30 minutes of use, to remind you to clean stubble buildup.
- Ensure the shaver is turned off and not charging before cleaning.
- Rinse the shaving head under a faucet (warm water is recommended).

Rinsing the shaving head under running water.
- Remove the shaving head from the holder.

Detaching the shaving head from the shaver body.
- Rinse away stubble buildup with water or use the cleaning brush.

Using the cleaning brush to remove hair residue from the shaving head.
- Turn over the shaving head to clean its inside under a faucet. Use warm water and do not use a towel or paper towel to wipe the head.

Cleaning the internal part of the shaving head under running water.
- Wipe away any excess water from the shaving head holder and reinstall the shaving head.

Wiping the shaving head holder and reattaching the shaving head.
When cleaning, use the protective cover to cover the charging port. Ensure the charging port is dry before plugging in the cable to charge.

The protective cover placed over the charging port to prevent water entry during cleaning.
Note: To ensure optimal performance, it is recommended to replace the shaving head every two years. Visit www.mi.com to purchase a replacement.
7. Environmental Protection
When the shaver reaches the end of its service life, please remove, dispose of, or recycle the built-in battery in accordance with local laws and regulations of the country or region it is used in.
Warning
Do not expose this shaver or its battery to fire to prevent the battery from exploding or releasing toxic and hazardous substances.
Removing Battery
Note: Make sure the battery is completely depleted before removing it. The following steps are for end-of-life disposal and may damage the product, making it unusable.
- Use a standard screwdriver to pry open the bottom and top covers, and remove the on/off button of the shaver. These parts cannot be restored once they are disassembled.
- Use a Phillips-head screwdriver to remove the screws on the bottom and release the inner compartment.
- Use a Phillips-head screwdriver to remove the screws from the inner compartment, then use a standard screwdriver to pry open the inner compartment from the bottom. Cut off the contact plate on the battery and be careful not to short circuit the contact plate. Remove the battery and handle it appropriately.
8. Specifications
| Feature | Detail |
|---|---|
| Name | Mi Electric Shaver |
| Model | S500 |
| Rated Voltage | 3.7 V |
| Charging Port | Type-C |
| Rated Power | 3 W |
| Rated Input | 5 V ⎯ 1 A |
| IP Rating | IPX7 |
| Charging Time | Approx. 90 min |
| Made in | China |
9. Troubleshooting
| Issue | Possible Causes | Solution |
|---|---|---|
| Poor-quality shaving | Shaving head is damaged or worn out | Replace with a genuine shaving head |
| Shaving head is clogged up with stubbles | Thoroughly clean the shaving head | |
| Low or depleted battery | Connect the charging cable to charge | |
| The shaver does not work after pressing the button | On/off button does not function | Return the shaver to after-sales service for repair |
| Travel lock is enabled | Press and hold the button for 3 seconds to disable | |
| Indicator light is in error or does not light up | Low battery, needs to be charged | Charge the shaver |
| Circuit board is damaged | Return the shaver to after-sales service for repair | |
| Irritated skin after shaving | Shaving head is damaged or worn out | Replace with a genuine shaving head |
| It takes a certain period of time for your skin to adapt to the shaver | Skin irritation will fade after 2-3 weeks of use | |
| Unable to charge | Shaver is damaged | Return the shaver to after-sales service for repair |
| Ambient temperature is too low/high to charge | Charge in environments with a temperature between 5°C to 35°C | |
| The usage time is less than 60 minutes after being fully charged | The load on the motor is increased if the shaving head hasn't been cleaned for a long time | Thoroughly clean the shaving head |
| Shaver battery error | Return the shaver to after-sales service for repair | |
| Clean/error indicator blinks for 5 seconds after turning on the shaver | The load on the motor is increased if the shaving head hasn't been cleaned for a long time | Thoroughly clean the shaving head |
| Shaving head is not properly installed | Reinstall the shaving head or contact after-sales service |
10. User Tips
- Adaptation Period: If you have sensitive skin or hard hairs, allow your skin time to adapt to electric shaving. Regular use (at least 3 times a week for 3 weeks) can help reduce initial irritation.
- Battery Life: The shaver's battery is known for its long-lasting performance, with a clear and easy-to-read display for charge percentage.
- Charging Convenience: The USB-C charging port offers universal compatibility, allowing you to charge from various sources.
- Shaving Quality: Many users find the shave quality comparable to or even superior to other well-known brands, providing a very close and smooth result.
- Maintenance: Replacement blades are available, contributing to the shaver's durability and long-term performance.
11. Warranty & Support
As a Xiaomi consumer, you benefit from specific consumer warranty benefits in addition to any legal warranties provided by your national consumer law. For more information on consumer warranty benefits, please refer to Xiaomi's official website: https://www.mi.com/en/service/warranty/.
After-sales services are generally limited to the country or region of original purchase. Under consumer warranty, Xiaomi will, at its discretion, repair, replace, or refund your product, to the fullest extent permitted by law. Normal wear and tear, force majeure, abuse, or damage caused by user negligence or fault are not warranted.
The present warranties do not apply in Hong Kong and Taiwan. Products not duly imported, manufactured by Xiaomi, or acquired from an official Xiaomi seller are not covered. You may benefit from warranties from the non-official retailer who sold the product; contact them if in doubt.
A detailed user manual is also available in PDF format: Download User Manual PDF