Aigo AM12

Contents

Aigo AM12 RGB Fan User Manual

Brand: Aigo | Model: AM12

This manual provides detailed instructions for the installation, operation, and maintenance of your Aigo AM12 RGB Fan. Please read thoroughly before use.

1. Introduction

The Aigo AM12 RGB Fan is designed to provide efficient cooling for your PC case and radiators while adding vibrant Addressable RGB (ARGB) lighting to your system. This fan features a 120mm size, 6-pin power interface, and compatibility with 5V-3pin ARGB motherboard synchronization, allowing for extensive customization of lighting effects.

Aigo AM12 RGB Fan Kit with remote and controller
Aigo AM12 RGB Fan Kit, showcasing fans, controller, and remote.

2. Safety Information

  • Ensure all power is disconnected from your computer before installing or handling any internal components.
  • Avoid touching fan blades during operation.
  • Do not expose the product to moisture or extreme temperatures.
  • Handle components with care to prevent damage to pins or connectors.
  • Use only the provided cables and controller to avoid compatibility issues or damage.

3. Package Contents

Please check the contents of your package. Depending on the kit purchased, it may include:

  • Aigo AM12 RGB Fans (quantity varies by kit)
  • RGB Fan Controller Box
  • Remote Control
  • Mounting Screws
  • 6-pin Fan Cables
  • 5V-3pin ARGB Motherboard Sync Cable
  • SATA Power Cable
  • LED Light Strip (optional, if included in kit)
Aigo AM12 10-fan kit with controller and remote
Example of a 10-fan kit with controller and remote.

4. Setup and Installation

Follow these steps to install your Aigo AM12 RGB Fans:

  1. Mount Fans: Securely mount the AM12 fans to your PC case or radiator using the provided screws. Ensure the airflow direction is as desired (refer to the fan's side for arrows indicating airflow).
    Aigo AM12 fan with airflow direction arrows
    Airflow direction on the Aigo AM12 fan.
    Aigo AM12 fan showing anti-vibration mat
    Anti-vibration mats on the fan corners help reduce noise.
  2. Control Box Wiring: Connect the fans and power to the control box as shown in the diagram below.
    • POWER IN: Connect the SATA power cable from your power supply to the control box's SATA port.
    • FANS (FAN1-FAN10): Connect the 6-pin fan cables from each AM12 fan to the corresponding 6-pin ports on the control box. It is recommended to connect them in sequence (from FAN1 to FAN10).
    • LED1-LED2: If you have an optional LED light strip, connect it here.
    • RESET: Connect the reset cable from your computer case to this port if you wish to control the lighting effects via the case's reset button.
    • M/B SYNC: Connect the 5V-3pin ARGB cable from the control box to a compatible 5V-3pin ARGB header on your motherboard. This allows for software control of the lighting. Do not connect to a 12V-4pin RGB header.
    Aigo AM12 Control Box Wiring Diagram
    Control box wiring diagram for Aigo AM12 fans.
  3. Cable Management: Organize cables neatly to ensure proper airflow and a clean build.

5. Operation

Your Aigo AM12 RGB Fans can be controlled either via the included remote control or through your motherboard's ARGB software (if M/B Sync is connected).

5.1. Remote Control Usage

The remote control allows for easy adjustment of lighting effects and brightness. Ensure the control box is set to RC mode (not M/B Sync) for remote functionality.

Aigo AM12 Remote Control Functions
Aigo AM12 Remote Control with button functions.
  • On/Off: Powers the lighting on or off.
  • RC/MB: Toggles between remote control mode (RC) and motherboard synchronization mode (MB).
  • M+/M-: Adjusts the lighting mode (pattern). All patterns in AUTO mode are executed sequentially, each pattern for 5 seconds.
  • S+/S-: Increases or decreases the speed of the lighting effects.
  • Brightness Control: Adjusts the luminosity of the LEDs.
  • Seven Color Monochromatic Shortcut Keys: Direct access buttons for specific single-color lighting.

Note: The remote control adjusts the speed of the lighting effects, not the rotational speed (RPM) of the fans.

5.2. Motherboard Synchronization (M/B Sync)

If you have connected the M/B Sync cable to your motherboard's 5V-3pin ARGB header and selected 'MB' mode on the controller, you can control the fan lighting using your motherboard's dedicated RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

Video showcasing the dynamic ARGB lighting effects of the Aigo AM12 fans in a PC build.

6. Maintenance

  • Cleaning: Periodically clean the fan blades and housing with a soft, dry cloth to remove dust buildup. For stubborn dust, a can of compressed air can be used. Ensure the computer is powered off and unplugged before cleaning.
  • Inspection: Regularly check all cable connections to ensure they are secure.
  • Avoid Lubrication: The fans use Fluid Bearings, which are designed for long life and do not require additional lubrication.

7. Troubleshooting

  • Fans or Lights Not Working:
    • Check if the SATA power cable is securely connected from your power supply to the control box.
    • Ensure all 6-pin fan cables are firmly connected to the control box.
    • If using M/B Sync, verify the 5V-3pin ARGB cable is correctly connected to the motherboard header and the controller is in 'MB' mode.
  • Remote Control Not Responding:
    • Ensure the control box is in 'RC' mode.
    • Check the battery in the remote control and replace if necessary.
    • Ensure there is no obstruction between the remote and the control box.
  • Cannot Control Fan Speed via Remote:

    The remote control for the Aigo AM12 fans is designed to control the lighting effects (mode, speed, brightness), not the rotational speed (RPM) of the fans. Fan speed is typically managed by your motherboard's BIOS/UEFI settings or dedicated fan control software, or it operates at a fixed speed if not connected to a PWM header.

  • ARGB Lighting Not Syncing with Motherboard:
    • Confirm the M/B Sync cable is connected to a 5V-3pin ARGB header on your motherboard, not a 12V-4pin RGB header. Connecting to a 12V header can damage the LEDs.
    • Ensure the control box is switched to 'MB' mode.
    • Check your motherboard's RGB software settings to ensure the ARGB header is enabled and configured correctly.

8. Specifications

Attribute Value
Brand Name Aigo
Model Number AM12
Fan Size 120 MM
Dimensions 120mm x 120mm x 25mm (approx.)
Voltage 12V
Power (W) 5.04
Power Interface 6pin, 5v-3pin ARGB
Fan Speed 1200 - 1320 RPM
Air Volume 48 CFM
Noise Level 21dBA
Bearing Type Fluid Bearing
Fan Life 100000 hrs
Blade Quantity 7
Used For Case, Radiator
Certification CE, FCC, RoHS
Aigo AM12 fan dimensions
Aigo AM12 fan dimensions: 120mm x 120mm x 25mm.

9. User Tips

  • Pin Compatibility: Always double-check the pin configuration of your fans and controller. The Aigo AM12 fans use a 6-pin connector for the controller.
  • ARGB Header: When connecting to your motherboard for synchronization, ensure you use a 5V-3pin ARGB header. Using a 12V-4pin RGB header can cause irreversible damage to the fan LEDs.
  • Fan Speed Control: Remember that the remote control primarily manages lighting effects. For fan rotational speed control, utilize your motherboard's BIOS/UEFI settings or fan control software.
  • Controller Functionality: If you experience issues with the remote, ensure the controller is set to 'RC' mode. If using motherboard sync, ensure it's set to 'MB' mode.

10. Warranty and Support

For detailed warranty information and further technical support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

© 2024 Aigo. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.