1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your WENZHI ZigBee/Wifi MmWave Human Presence Motion Sensor. This advanced sensor utilizes millimeter-wave radar technology to accurately detect human presence, motion, and even micro-motions, along with luminance and distance detection capabilities. It is designed for seamless integration into your smart home system via Tuya Smart Life or ZigBee2mqtt for enhanced automation and security.
2. Safety Information
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Do not attempt to disassemble or modify the device.
- Ensure the power supply matches the device's specifications (USB 5V for wall mount, 80-240VAC for ceiling mount).
- Keep the device away from water and high humidity environments.
- Avoid installing the device near strong electromagnetic interference sources.
- Installation should be performed by qualified personnel if you are unsure about electrical wiring.
3. Package Contents
Please check the package for the following items:
- Human Presence Motion Sensor (Wall Mount or Ceiling Mount version)
- User Manual (this document, also available as PDF: User manual (PDF))
- USB Cable (for Wall Mount version)
- Mounting Accessories (e.g., double-sided adhesive for wall mount, buckles for ceiling mount)
4. Specifications
| Parameter | Description |
|---|---|
| Model | WZ-M100 (Wall Mount), WWZ-100-C (Ceiling Mount), M00-24G (24GHz) |
| Brand Name | wenzhi |
| Size | Wall Mount: 58x58x11mm (2.28x2.28x0.43 inch) Ceiling Mount: Ø61xH39mm (Ø2.4xH1.54 inch) |
| Weight | 70g |
| Detection Angle | 120° (5.8GHz), 100° (24GHz) |
| Detection Range | 7-10m (adjustable) |
| Ceiling Detection Radius | Presence: 2-3m, Motion: 4-4.5m |
| Sensor Sensitivity | 1-9 (Default: Motion 5, Presence 7) |
| Sense Distance | 0-10m (Default 7m) |
| Unmanned Delay | 5-1500s (Default 15s) |
| Illuminance | 0-2000 Lux |
| Detection Delay | 0-100s (Default 0.1s) |
| Interval Time | 1.5s (frequency of data reporting) |
| Frequency | 5.8GHz / 24GHz |
| Transmitting Power | 3-5 dBm (5.8GHz), 10 dBm (24GHz) |
| Network | ZigBee3.0/Wifi (2.4GHz) BLE |
| Input | Wall Mount: USB 5V Ceiling Mount: 80-240VAC |
| Working Temperature | -20°C ~ +70°C |
| Working Humidity | 5~90% RH (No Condensation) |
| Working Altitude | 0-3500m |
| Certifications | CE, FCC, RoHS |
5. Setup and Installation
5.1 Physical Installation
Refer to the diagram below for installation principles and detection range considerations.
Wall Mount Installation
- Recommended installation height: 1.5 to 2 meters above the ground.
- Power supply: USB 5V 1A.
- Attach the sensor to the wall using double-sided adhesive or other suitable mounting methods.
Ceiling Mount Installation
- Recommended opening size for ceiling: 53-58mm (55mm recommended).
- Recommended installation height: 2.7-3.5m.
- Insert the sensor into the ceiling opening and secure it with the provided buckles.
- It is recommended to install the sensor in the ceiling after a successful network connection.
Installation Principles
- Pathways/Rooms: Install in the center of the area as much as possible.
- Bathrooms/Toilets: Install in front of the toilet position, away from doors, windows, and exhaust fans.
- Living Room/Dining Room/Conference Room: Locate 0.5-1m in front of the room, slightly above the main activity area.
- Bedroom/Study: Directly above the bed/desk, within 0.6-1.5 meters behind the head. Avoid direct overhead installation if possible.
- Glass/Gypsum Board Partitions: Install as close to a solid wall as possible. If all glass/gypsum board, install in the center and adjust detection range/sensitivity to avoid false detections.
- Detection Deployment: Linear spacing between sensors should not be less than 0.8m.
5.2 Network Connection (Tuya App)
- App Installation: Search for "Tuya" or "Smart Life" in your app store and download it. Register and log in to the app.
- Connect to Network:
- The sensor will automatically enter network connection mode when powered on. The RED indicator light will flash quickly.
- If connection fails, power cycle the device or press and hold the network button for more than 5 seconds to re-enter network connection mode.
- Open the Tuya Smart Life app, click the "+" icon in the upper right corner, and select "Add Device".
- Wait for the app to discover the device. Once discovered, add it.
- After successful addition, the device's RED indicator light will turn off.
5.3 Network Connection (ZigBee2mqtt)
For connecting the ZigBee sensor to ZigBee2mqtt, please refer to the official ZigBee2mqtt documentation or community guides for detailed configuration steps. A common resource can be found at: zigbee2mqtt.io
6. Operation
The sensor offers various detection functions and configurable parameters through the connected smart home application (e.g., Tuya Smart Life).
6.1 Detection Functions
- Presence Detection: Detects static human presence, such as standing still or sitting.
- Motion Detection: Detects larger movements like walking, jogging, or turning.
- Micro-Motion (Fretting) Detection: Detects subtle movements like breathing, typing, or slight shifts in position.
- Luminance Detection: Measures the ambient light level (0-2000 Lux).
- Distance Measurement: Provides an approximate distance to the detected target.
6.2 App Settings and Automation
Through the Tuya Smart Life app or your ZigBee controller interface, you can configure various parameters:
- Detection Distance: Adjust the farthest and nearest detection distances. This is crucial for defining the active detection zone and preventing false triggers.
- Sensitivity: Adjust the sensor's responsiveness to motion and presence. Higher sensitivity detects smaller movements but may increase false positives.
- Unmanned Delay: Set the time duration after which the sensor reports no presence (e.g., to turn off lights).
- Detection Delay: Configure a short delay before reporting initial detection.
- Illuminance Thresholds: Use the luminance data to create automation rules, such as turning on lights when presence is detected and the ambient light is below a certain level.
7. Maintenance
- Keep the sensor clean and free from dust. Use a soft, dry cloth for cleaning.
- Do not use abrasive cleaners or solvents.
- Ensure the sensor's detection surface is not obstructed by furniture, curtains, or other objects.
- Regularly check for firmware updates through your smart home app to ensure optimal performance and new features.
8. Troubleshooting
8.1 Common Interference Sources & Solutions
- Fan Interference: Change the position of the fan or the sensor. The fan should not appear in the sensor's detection area.
- Air Conditioning: Ensure the air swing and louver rotation of the air conditioning unit are outside the presence detection area of the sensor.
- Rolling Shutter with Aluminum Alloy: Set an appropriate detection range to filter out such interference.
- Exhaust Fan: Avoid installing the sensor where it might detect vibrations from exhaust fans.
- Strong 5.8GHz Signal Interference: If using a 5.8GHz sensor, it is recommended to install Wi-Fi routers at least 1 meter away from the front of the sensor, and at least 1.5 meters away if the router is in other directions (e.g., side or top).
- Air Flow (Wind): Set appropriate sensitivity levels to prevent false triggers from drafts.
- Animals: Adjust sensitivity and detection range settings to minimize detection of pets.
- Low Frequency Vibrator: Avoid direct exposure of the radar signal to sound and other vibration sources. Set a relatively low sensitivity and a detection delay time to avoid false triggering.
8.2 General Issues
- Sensor not connecting to network: Ensure the sensor is in pairing mode (RED indicator flashing). Check your Wi-Fi or ZigBee hub connection. Ensure your Wi-Fi is 2.4GHz.
- Inaccurate detection: Adjust sensitivity and detection range settings in the app. Ensure there are no obstructions in the detection area. Review installation principles.
- Delayed response: Check network stability. Adjust the 'Detection Delay' parameter in the app.
9. User Tips
- The sensor offers very precise detection, capable of capturing even small movements, which is excellent for reliable automation.
- Utilize the adjustable maximum distance setting to fine-tune the detection zone and prevent unwanted activations in adjacent areas.
- The integrated luminance detection is highly useful for advanced lighting automation, allowing lights to activate only when both presence and low ambient light are detected.
- While the sensor provides extensive configuration options, which can be complex initially, taking the time to set them correctly ensures optimal performance.
- Be aware that light activation might have a slight delay (2-5 seconds in some configurations), but the sensor is highly effective for turning off lights when a room becomes unoccupied.
10. Frequently Asked Questions
- Q: Can the sensor be painted?
- A: It is generally not recommended to paint the sensor as it may interfere with the radar's performance and detection accuracy. Any modification to the sensor's surface could impact its functionality.
- Q: What is the detection angle of the sensor?
- A: The detection angle is 120° for the 5.8GHz models and 100° for the 24GHz models.
- Q: How can I use multiple detectors in parallel or create a two-way control system?
- A: Using multiple detectors in parallel or for two-way control typically involves configuring automation rules within your smart home hub (e.g., Tuya Smart Life, Home Assistant with ZigBee2mqtt). You would set up scenes or routines where the state of one sensor can trigger actions or influence the behavior of another sensor or device. Consult your smart home platform's documentation for advanced automation setup.
11. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the WENZHI customer service directly. Keep your purchase receipt for any warranty claims.
12. Compliance
This device complies with relevant safety and environmental standards, including CE, FCC, and RoHS certifications. For detailed compliance documentation, please contact the manufacturer.