1. Introduction
Thank you for choosing the RETEVIS RB645/RB45 Professional Portable Walkie Talkie. This device is designed for reliable and efficient communication in various environments such as hotels and restaurants. It features a compact design, dual PTT functionality, and is license-free for ease of use. This manual provides detailed instructions for setup, operation, maintenance, and safety to ensure optimal performance and user safety.

2. Setup
2.1 Package Contents
Upon unboxing your Retevis RB645/RB45 walkie-talkie, you should find the following items:
- RB645/RB45 Walkie Talkie Unit(s)
- User's Manual
- Rechargeable Battery(ies)
- USB-C Charging Cable(s)
- Lanyard(s)
2.2 Key Introductions
Familiarize yourself with the buttons and ports on your walkie-talkie:

- PTT (Push-to-Talk) Button: Used for transmitting your voice. The RB645 features a dual PTT design, allowing transmission from either side.
- CH+ Button: Short press to increase the channel number. Long press for 3 seconds to lock/unlock the channel.
- CH- Button: Short press to decrease the channel number.
- Power Button: Long press for 3 seconds to turn the radio on/off.
- MIC: Microphone for speaking.
- Speaker: For receiving audio.
- TX/RX Indicator: Shows transmitting (red), receiving (green), or charging (blue) status.
- Earpiece Jack: For connecting compatible 2-pin K plug accessories.
- Type-C Charging Jack: For charging the device.
2.3 Battery Installation
The RB645 walkie-talkie comes with a rechargeable battery. Ensure the battery is correctly inserted into the battery compartment before use. Refer to the user manual PDF for detailed instructions if needed.
2.4 Charging
To charge your walkie-talkie, open the earpiece jack cover and insert the USB-C charging cable. The indicator light will glow blue during charging. Once fully charged, the indicator light will turn green.

3. Operating Instructions
3.1 Power On/Off
Long press the Power Button for 3 seconds to turn on the radio. The radio will broadcast "power on" and the current channel number. Press the button again to turn off the radio, and it will prompt "OFF".
3.2 PTT (Push-to-Talk)
To transmit, press and hold the PTT button. Release the PTT button to receive. The RB645 features a dual PTT design, allowing you to transmit using either the front or side PTT button, making communication more convenient for both left and right-handed users.

3.3 Channel Selection
Short press the CH+ button to move to the next channel, or the CH- button to move to the previous channel. The radio supports 16 memory channels.
3.4 Channel Lock
Long press the CH+ button for 3 seconds to lock the channel. The radio will make a toot sound. When locked, the CH+ and CH- buttons are ineffective. Long press the CH+ button for 3 seconds again to unlock.
3.5 Volume Adjustment
The side keys (Side Key 1 and Side Key 2) can be configured for volume control:
- Volume + (Side Key 1): Short press to increase the volume.
- Volume - (Side Key 2): Short press to decrease the volume.
3.6 VOX Function (Voice Operated Exchange)
The VOX function allows for hands-free communication without pressing the PTT button. When enabled via programming software, the radio will automatically transmit when it detects your voice. The VOX gain level can be adjusted from 1-9 (default 5) through the programming software.
3.7 Emergency Alarm
The RB645 features a local and remote emergency alarm. If the current channel has a transmitting frequency, long press Side Key 2 (default) to activate the emergency alarm. The radio will emit an alarm sound. To exit the alarm, press the PTT key.
3.8 Scan Function
Long press a side key (if configured for Scan) to activate scan mode. The radio will check channels 1-22 for activity. If a signal is detected, the radio will stop on that channel. Long press the side key again to exit scan mode.
3.9 Monitor Function
If a side key is configured for Monitor, long press it to listen to the current channel for any signals. If there is no signal, you will hear a rustling sound.
3.10 Squelch Level
The squelch level determines the threshold for opening the receiver. It can be preset and adjusted from 0 (ON) to 9 (Deep) in user mode. Default is 3.
3.11 CTCSS/DCS
CTCSS/DCS signaling can be set for each channel via programming software. When a channel is set with CTCSS/DCS, the squelch will only open if the radio receives the same CTCSS/DCS signal. If different CTCSS/DCS are used on the same channel, the squelch will remain closed, and the indicator will flash green.
3.12 TOT (Time-Out Timer)
The TOT feature prevents a user from transmitting for too long on a channel. The TOT time can be set through the programming software, typically between 30-180 seconds.
3.13 Battery Save Function
When enabled, if there are no operations for 10 seconds, the radio automatically enters battery save mode to conserve power.
3.14 Indicator Lights
The RB645 features a circle breathing indicator that provides bright and colorful working status indications:
- Red: Transmitting
- Green: Receiving
- Blue: Charging

4. Specifications
The Retevis RB645/RB45 walkie-talkie offers robust performance in a compact design.
4.1 General Specifications
| Attribute Name | Attribute Value |
|---|---|
| Brand Name | RETEVIS |
| Model Number | RB45/RB645 |
| Walkie Talkie Type | MINI Walkie Talkie |
| Material | ABS |
| Is_Display | No |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |
| Origin | Mainland China |
| Certification | CE, FCC |
4.2 Performance Specifications
| Attribute Name | Attribute Value |
|---|---|
| Output Power(w) | 0.5w-3w (RB45 FRS version: 2W) |
| Battery Capacity(mAh) | 1100 mAh |
| Working Time | 10 hours |
| Standby Time | 30 hours |
| Storage Channel | PMR:16, FRS:22 |
| Frequency Range | 446MHz (PMR446) / 462+467MHz (FRS) |
| Maximum Range | 1.5km-3km |
| Dimensions | 106*53*18mm (H*W*D without antenna) |
| Weight | 103g |


4.3 PMR(446) Frequency Table
The following table lists the standard PMR(446) frequencies and CTCSS codes:
| CH NO. | Frequency(MHz) | Code(Hz) |
|---|---|---|
| 1 | 446.00625 | 114.8 |
| 2 | 446.01875 | 114.8 |
| 3 | 446.03125 | 114.8 |
| 4 | 446.04375 | 114.8 |
| 5 | 446.05625 | 114.8 |
| 6 | 446.06875 | 114.8 |
| 7 | 446.08125 | 114.8 |
| 8 | 446.09375 | 114.8 |
| 9 | 446.10625 | D026N |
| 10 | 446.11875 | D026N |
| 11 | 446.13125 | D026N |
| 12 | 446.14375 | D026N |
| 13 | 446.15625 | D026N |
| 14 | 446.16875 | D026N |
| 15 | 446.18125 | D026N |
| 16 | 446.19375 | D026N |
5. Maintenance
5.1 Battery Safety
Proper handling and maintenance of batteries are crucial for safety and longevity:
- Low Battery Alert: When the voltage is lower than 3.3V, the radio will prompt "Please charge your radio" every 20 seconds.
- Avoid Short Circuits: Do not allow conductive materials (jewelry, keys, chains) to touch exposed battery terminals, as this can cause short circuits, overheating, and burns.
- Storage: Store spare batteries securely and out of reach of children.
- Damaged Batteries: Do not use batteries that show signs of damage, leakage, or overheating.
- Disposal: Dispose of used batteries immediately and safely according to local regulations.
5.2 General Care
To ensure the longevity and proper functioning of your walkie-talkie:
- Keep the device clean and dry.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
- Do not disassemble the device or attempt unauthorized repairs.
6. Troubleshooting
6.1 Low Battery Alert
If your radio repeatedly prompts "Please charge your radio", it indicates that the battery voltage is below 3.3V. Connect the radio to a USB-C charger immediately.
6.2 Interference
Nearly all electronic devices are susceptible to electromagnetic interference (EMI). If you experience interference:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
7. Safety Information
Please read and understand the following safety guidelines before using your walkie-talkie to prevent injury and ensure compliance with regulations.
7.1 RF Energy Exposure
This two-way radio uses electromagnetic energy. All Retevis two-way radios are designed, manufactured, and tested to meet government-established RF exposure levels. To control your exposure and ensure compliance, always adhere to the following procedures:
- Antenna: Do not operate the radio without a proper antenna attached. A damaged antenna can cause minor burns if it comes into contact with skin.
- Body-Worn Operation: When operating in front of the face or worn on the body, always place the radio in a Retevis approved clip, holder, holster, case, or body harness. Maintain at least 2.5 cm (1 inch) distance from the nose or lips.
- Transmission Time: Transmit no more than 50% of the total radio use time. Excessive transmission can cause RF exposure compliance requirements to be exceeded.
- Interference: Turn off the radio in areas where signs are posted to do so, especially in sensitive areas like hospitals, aircraft, and blasting sites.
7.2 Hearing Protection
To protect your hearing:
- Use the lowest volume necessary for your task.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding a headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.

7.3 Choking Hazard
This product contains small parts which may pose a choking hazard. Keep out of reach of children under 3 years.

7.4 Prohibited Use
- Do not use the charger outdoors or in moist environments.
- Do not disassemble the charger.
- Do not operate the charger if it is broken or damaged.
- Do not place a portable radio in the area over an airbag or in the airbag deployment area in a vehicle.
- Turn off your radio in potentially hazardous environments (e.g., near electrical blasting caps, in explosive atmospheres).
- Turn off your radio while taking on fuel or parked at gasoline service stations.
7.5 Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. It also complies with CE and IC requirements.

8. User Tips
Based on user feedback and common questions, here are some tips for using your RB645/RB45 walkie-talkie:
- Range: Users have reported effective communication at distances of up to 1 kilometer in urban environments. Actual range may vary based on terrain and obstructions.
- Headphone Compatibility: The RB645/RB45 is compatible with 2-pin K plug headphones for private listening and hands-free operation.
- Ease of Use: The device is generally considered very easy to use, making it suitable for various staff members in dynamic environments.
9. Warranty & Support
9.1 Warranty Coverage
Most new products carry a two-year manufacturer's warranty from the date of purchase. To claim warranty service, you will need to provide proof of purchase from the actual seller.
9.2 Exclusions from Warranty Coverage
The warranty does not cover:
- Any product damaged by accident.
- Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
- Products with altered, defaced, or removed serial numbers.
9.3 Additional Resources & Support
For further resources, including brochures, software/firmware, and the full user manual in PDF format, please visit the official Retevis website or contact your direct reseller.
You can view the official user manual PDF here.
Manufacturer Contact:
Shenzhen Retevis Technology Co.,Ltd.
Add: 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China
Web: www.retevis.com
E-mail: kam@retevis.com