1. Introduction
Thank you for choosing the MEKEDE Car Multimedia System. This device is designed to enhance your driving experience with advanced features such as navigation, multimedia playback, and smart connectivity. This manual provides essential information for safe installation, operation, and maintenance of your device.
About MEKEDE
Shenzhen Mekede Technology Co. Ltd. is a high-tech company specializing in manufacturing car multimedia systems, CAR GPS, and CAR monitors. We are committed to delivering advanced products that meet international standards, focusing on honesty, high quality, and technological development. Our strong R&D team continuously develops products in line with the latest technological advancements and market trends. Since 2009, approximately 80% of our products have been exported globally, earning a good reputation for quality and after-sales service.
The MEKEDE Car Multimedia System offers a comprehensive solution for in-car entertainment and navigation, featuring an 8-core processor, 8+256GB memory, 4G LTE, 5G WIFI, DSP, and RDS capabilities.
2. Safety Measures
- It is forbidden to watch videos or use other visual accessories while driving. Active use of the system during driving is not recommended as it can reduce attention and may lead to traffic violations or accidents.
- The unit is designed for use in cars with a 12V power supply and a minus ground. Do not install the system in a bus or truck with an on-board voltage of 24V, as this may cause damage to the device.
- Use a special cleaning device to care for the screen.
- To avoid overheating, do not allow direct exposure to sunlight and do not install near the heating system. Operating temperature is between 0°C and 35°C. If the vehicle's interior temperature is too high, cool the interior before switching on the system. It is also not recommended to operate the unit at very low temperatures. Wait until the interior and vehicle temperatures return to normal. When the temperature is low, the image on the screen may change with a delay, which is not a malfunction. Wait until the multimedia system reaches the operating temperature.
- Only use the fasteners provided (screws, mounting frames, etc.) for installation. Using other fasteners may result in damage to the system, which is not covered by the warranty.
- Installation and connection of the device shall be performed by a qualified specialist or specially trained staff of a service center.
- Do not reset to factory settings on your own unless in extreme cases, as this will cause loss of your settings and may result in incorrect operation of the system.
- Violation of the above items and improper use may cause the system to malfunction, in which case the warranty service will not be performed.
- Attention! Do not use metal or sharply sealed objects to control the sensory interactive display. Also, do not apply excessive force when touching the screen.
3. Package Contents
The package typically includes the following items:
- Main Machine (Head Unit)
- RCA Cable (Note: M90S/95S models may not include a cooling fan connector cable)
- Reversing Camera (Optional accessory, not included in all packages)
- USB Cable (Some models include 2 USB plugs, others 3)
- MIC (Note: M90S/95S models may not include a MIC)
- GPS Antenna
- 4G Antenna
Image showing the main unit and various cables and accessories included in the package.
4. Technical Specifications
| Feature | Specification |
|---|---|
| Mounting size | 9" / 10" |
| Screen resolution | 1280x720 IPS |
| Screen size | 9" and 10" |
| CPU | 8-core |
| RAM | DDR3 2GB / 3GB / 4GB / 6GB / 8GB |
| ROM | 32GB / 64GB / 128GB / 256GB |
| Operating system | Android 12 |
| Maximum output power | 4 x 45 W |
| Sound amplifier | TDA 7388/Toshiba 001 (M200S M300S), TDA7851/7850/7838 (M400S M500S M600S M700S M800S) |
| Chip FM tuner | NXP TEF6686 |
| Features of the equalizer | Low Pass Filter, Tone Compensation, Balance Mode, Surround Sound Mode, Extended Equalizer settings (32 bands) |
| Car-Play / Android Auto | Supported (add-on Car Link) |
| Video format | RMVB, MKV, MOV, WMV, AVI, MPG, TS, H.264 codec and others. |
| Audio format | MP3, WMA, WAV, OGG, FLAC |
| GPS | Built-in receiver with external antenna |
| Software for navigation | Support |
| Wi-Fi | Support |
| 360°Camera | Support |
| BT | A2DP and BT address book transfer |
| Control of the steering wheel buttons | Support |
| ADAS DVR | Activation in the settings menu |
| AHD HD reversing | Automatic activation of video input |
| 4G Internet / 4G LTE | Support |
| DSP | Support |
| Start | 16c~20 c |
| Voltage during operation | DC12V |
| Voltage at operating range | 9V~16V |
| Electric current | 15A |
| Operating temperature | -20°C - +70°C |
| Main menu language | Support for multiple national languages |
| Guarantee | One year |
5. Setup and Installation
5.1. Connection Diagram of the Device
Refer to the following diagrams for proper connection of the multimedia system. Ensure all cables are securely connected to prevent malfunctions.
This diagram illustrates the various connection points including GPS, 5G WiFi, 4G Antenna, USB ports, and audio/video inputs/outputs. The cooling fan connection is also shown.
5.2. Device Connector Pinout Diagram
Ensure all wires are properly connected according to the pinout diagrams below. Incorrect connections can cause device faults.
Interface Area AB (RCA Audio/Video & 360° Panoramic Device)
| Pin | Function (RCA Audio/Video) | Pin | Function (360° Panoramic Device) |
|---|---|---|---|
| A1 | AMP-POW | B1 | L-TURN |
| A2 | AGND | B2 | R-TURN |
| A3 | AUX-R | B3 | GND |
| A4 | RCA-FL | B4 | F_CAM_VID |
| A5 | AUX-L | B5 | GND |
| A6 | RCA-FR | B6 | R_CAM_VID |
| A7 | SIM-DATA | B7 | GND |
| A8 | GND | B8 | REAR_CAM_VID |
| A9 | SIM-CS | B9 | GND |
| A10 | GND | B10 | L_CAM_VID |
| A11 | SIM-CLK | B11 | VCC (+5V DC) |
| A12 | GND | B12 | VCC (+5V DC) |
| A13 | SIM-RST | ||
| A14 | NC | ||
| A15 | SIM-VCC | ||
| A16 | SUB-OUT | ||
| A17 | MID-OUT | ||
| A18 | AUX-CVBS | ||
| A19 | RCA-RR | ||
| A20 | RCA-RL |
Interface Area CDEF (Digital TV, USB, Reverse Video)
| Pin | Function (Digital TV) | Pin | Function (One USB Interface) | Pin | Function (Double USB Interface) | Pin | Function (Reverse Video Cable) |
|---|---|---|---|---|---|---|---|
| C1 | GND | D1 | USB_DPO | E1 | USB_DPI | F1 | CDC-TX |
| C2 | TV12V | D2 | USB_5V | E2 | USB_5V | F2 | NC |
| C3 | TV_L | D3 | USB_DNO | E3 | USB_DNI | F3 | CDC-RX |
| C4 | TV_R | D4 | GND | E4 | GND | F4 | GND |
| C5 | M_NRST | E5 | USB_DP2 | F5 | IR-OUT | ||
| C6 | TV-V | E6 | USB_DN2 | F6 | CAM-VIDEO | ||
| C7 | MCU-RX(CAN-TX) | F7 | CAM-POWER | ||||
| C8 | MCU-TX(CAN-RX) | F8 | GND | ||||
| F9 | BRAKE | ||||||
| F10 | WIFI-ANT |
Power Cable Interface Details
| Pin | Function | Pin | Function |
|---|---|---|---|
| G1 | GND (-12VDC) | G2 | B+ (+12VDC) |
| G3 | ACC Key Switch (+12VDC) | G4 | ILL (small lights detecting) |
| G5 | BACK (Reverse detecting line) | G6 | KEY2 (Steering wheel control study -2) |
| G7 | KEY1 (Steering wheel control study -1) | G8 | ANT (ANT power +12VDC) |
| G9 | FR- (Front right speaker (-)) | G10 | RL- (Rear left speaker (-)) |
| G11 | FR+ (Front right speaker (+)) | G12 | RL+ (Rear left speaker (+)) |
| G13 | FL- (Front left speaker (-)) | G14 | RR+ (Rear right speaker (+)) |
| G15 | FL+ (Front left speaker (+)) | G16 | RR- (Rear right speaker (-)) |
5.3. Rear Camera Connection Method
Without CANBUS Box
Connect the Rear Camera Control to G5. Connect the camera's 12V power supply to the Reverse Light. Connect the reversing light 12V to the reversing mode control. Ensure the GND is connected to Car Ground.
With CANBUS Box
Connect ACC to G3 ACC. For the camera power, connect the two red wires (camera power supply) together, but do not connect with other wires. Connect GND to Car Ground. If you have a CANBus box and the reverse control line (G3 area) is already connected to the CANBus box, the connection of the yellow line will not be needed.
5.4. CANBus Box Setup
If your car's original functions (e.g., steering wheel control) are not working, the CANBus type needs to be set. Check your CANBus photo and select the corresponding type. For TS7 T3L TS18 TS10 M100 M150 and Y1 Y2 TS100 TS150 TS200 models, connect as shown in the picture. Note: The WIFI cable must be plugged in for WIFI to work properly.
Setup steps:
- Go to Settings > Car Settings > Factory (Password: 8888).
- Select the appropriate CAN Box type based on your vehicle.
5.5. Initial Device Configuration
Turning On/Off the Device
The multimedia system automatically switches on after switching off the ignition and starting the engine, displaying the initial screen. If the unit activates automatically after the engine is switched off, this is normal behavior.
Touch Screen Operation
The unit features an interactive touchscreen. Before first use, remove the sealed plastic membrane. Otherwise, the touch screen may not function properly.
- Touch: Click an item to start a plugin (signal source) or select a menu item.
- Double Tap: A quick double touch allows you to resize images.
- Touch & Hold: Click and hold an item for 2 seconds to trigger an additional action.
- Dragging: Touch and hold a selected item, then drag it to a new position on the screen.
- Moving: Rotate the screen by touching and holding your finger, then moving it in the desired direction.
- Scroll Through: Move your finger on the screen in the direction you need to and let go. Rotation stops by touching the screen again or waiting for it to stop automatically.
Main Menu Interface Settings
You can customize the position of icons and freely edit applications on the quick menu bar. The system offers 5 different main menu screens to choose from. To change the main menu background, you can select a picture or photo from previously installed live wallpapers, spreadsheets, or images stored on a USB memory device or SD card.
Image illustrating the main menu interface, button light customization, and day/night UI switching.
Language Settings
The system supports multiple national languages. To change the language, navigate to Settings > Language and Input, then select your desired language.
Cooling Fan Setup
The cooling fan helps dissipate heat and maintain optimal operating temperature. The cooling fan starts automatically when needed. Some models (M90S/95S) may not include a cooling fan connector cable.
360° Camera Setup
If you wish to use a 360° camera, it must be ordered along with your car radio, as it requires a built-in 360° Camera Chip on the motherboard. To activate the 4 cameras, refer to the settings menu.
Setup steps: Go to Settings > Factory (Password: 3368) > Switch Backup Camera > Inner 360.
ADAS DVR Setup
The ADAS DVR (Advanced Driver-Assistance System Digital Video Recorder) function can be activated in the settings menu. This feature provides collision warning, distance prediction, and lane departure warnings to enhance driving safety. To install, connect via USB cable and install the software.
AHD HD Reversing
The AHD HD reversing feature automatically activates the video input when reversing. The image quality of AHD rear view video is sharper than conventional cameras.
6. Operating Instructions
6.1. Front Panel Control
The front panel of the device includes:
- Microphone
- Emergency reassembly of equipment
- Input/output switch/live switch/sound switch
- Return to main menu
- Switching back to the previous menu
- Increase volume
- Lower the volume
6.2. FM/AM Radio
To access the radio, click the 'Radio' icon on the main menu. You can select channels by tapping on the scale bar. The system supports LOC mode (strong signal stations only) and DX mode (all stations in range). You can also perform automatic scanning and save stations.
Video demonstrating the FM/AM radio function, showing channel selection and saving.
6.3. DSP Processor / Equalizer
The device is equipped with a DSP chip for advanced sound settings. Access the equalizer (EQ) option from the menu. You can adjust sound quality using various frequency settings, including low pass filter, tone compensation, balance mode, surround sound mode, and extended equalizer settings (32 bands). You can also set the listener position (Driver, Passenger, Rear, Center) or manually adjust the sound field.
The balance mode adjusts the volume ratio of speakers for optimal sound. This function also supports parametric bass tuning, allowing adjustment of center frequency and gain.
Video demonstrating the equalizer settings, showing adjustments for sound quality and balance.
6.4. Music / Video Playback
Connect a USB storage device or insert an SD memory card to play music or videos. The system supports various video formats (MP4, AVI, MMV, MOV, MKV, MPEG, RMVB, H.264) and audio formats (MP3, WMA, WAV, OGG, FLAC).
Attention: For safety, video playback is not available while the car is in motion. To view videos, stop in a safe place and apply the handbrake.
Video demonstrating music and video playback, showing supported formats and controls.
6.5. Bluetooth (BT) Function
The Bluetooth Hands-Free function allows you to sync your phonebook, make calls, and play music wirelessly. Click the 'BT' icon on the main menu, then enable Bluetooth on your phone and search for new devices. Pair the devices using the password (0000) if prompted. The system screen will show 'connected' upon successful pairing.
Video demonstrating Bluetooth connectivity for calls and music streaming.
6.6. Car Link (Car-Play / Android Auto)
Car Link allows you to use your iPhone (Wireless Car-Play) or Android (Android Auto) device in the car without distraction. You can sync your phone's apps, use navigation, make calls, send messages, and listen to music.
Connection steps:
- Connect your mobile phone and car DVD player with a USB cable (for Android Auto) or via BT (for Wireless Car-Play).
- Tap on 'Car Link'. Your phone will ask for authorization; authorize the connection and wait for completion.
Video demonstrating Carplay functionality, including app syncing and navigation.
6.7. Split Screen
The split-screen mode allows you to display two applications simultaneously on the main device screen, such as navigation and music. To exit split-screen mode, drag the icon between the two screens to the right.
Video demonstrating split-screen mode with two applications running side-by-side.
6.8. MAP Navigation
The system features a built-in global positioning system (GPS) with an external antenna, offering omnidirectional map display, synchronous real-time traffic, and fast, accurate positioning. Supported navigation apps include Navitel, IGO, Yandex, and Google.
6.9. 4G LTE and 5GHz WiFi
The built-in 4G LTE module allows you to connect to the cellular network. The device also supports 5GHz WiFi (802.11 b/g/n) for fast transmission, low latency, and wide coverage. You can connect the screen to your cellphone's hotspot to access the internet.
Video demonstrating built-in WiFi connectivity and internet browsing.
6.10. Lantern Settings (RGB)
The device has a multicolor illumination feature. You can set the light to your preferred color or enable automatic color change.
6.11. Additional Features
- DAB+ (Digital Audio Broadcasting): For EU countries, this feature provides better sound quality and stronger signal. (Requires additional purchase)
- OBDII (On-Board Diagnostics II): Monitor real-time data and retrieve fault codes from your car's on-board computer. (Requires additional purchase)
- TPMS (Tire Pressure Monitoring System): Sensors automatically monitor tire pressure and temperature, transmitting real-time statistics to the receiver. (Requires additional purchase)
- AV Output: The video output can display content on rear headrest screens, allowing passengers to watch HD video and audio. (Requires additional purchase)
- Steering Wheel Control: Take control of music or use hands-free calling for safety. The head unit supports digital SWC.
- Intelligent Voice Control: Support voice control via APP for hands-free operation.
7. Maintenance
7.1. Screen Care
To clean the touchscreen, use a soft, lint-free cloth and a specialized screen cleaning solution. Avoid using abrasive materials or harsh chemicals that could damage the screen surface. Do not apply excessive force when cleaning.
7.2. General Care
Keep the device free from dust and debris. Ensure proper ventilation around the unit to prevent overheating. Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
8. Troubleshooting
If you encounter a problem, try disconnecting and reconnecting your device. Use the special reset button if necessary. If the issue persists, refer to the table below. If these instructions do not resolve the problem, ensure the device is properly connected or consult your authorized dealer.
| Symptoms | Probable Cause | Solution |
|---|---|---|
| General Problems | ||
| Device does not turn on | The ignition key is not in the "On" position. | Turn the key to the "On" position. |
| Device doesn't get in the way. | Overheated fuses (15 A). | Check the presence of the circuit breaker in the device. If it is not working, replace it with a good one of the same nominal size. |
| Device does not turn on | Incorrect connection of the electrical supply droplets (black and yellow). | Check the connection of the electrical supply. |
| Bluetooth (BT) Problems | ||
| Phonebook contacts are not transferred. | No rights on the phone. | After connecting the phone to the device, go to the BT settings on the phone and authorize the transfer of the phone book. |
9. User Tips
- Vehicle Compatibility: Always verify compatibility with your specific car model and year before installation. For example, for a Mitsubishi ASX 2013 or Isuzu D-Max Ute 2016, check the screen size and required wiring looms.
- Wiring: Pay close attention to wiring diagrams, especially for CANBus connections and rear cameras. Incorrect wiring is a common cause of issues. If your car requires a CANBus, ensure the correct type is selected in the factory settings.
- Screen Size: The product is available in 9-inch and 10-inch screen sizes. Choose the size that best fits your vehicle's dashboard.
- Optional Accessories: Features like 360° camera, ADAS DVR, DAB+, OBDII, and TPMS require additional purchases and specific installation steps. Ensure these are integrated correctly if you opt for them.
- Software Updates: Keep your system updated to the latest software version for optimal performance and new features.
10. Warranty and Support
The MEKEDE Car Multimedia System comes with a one-year guarantee from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please refer to the safety measures section regarding conditions that may void the warranty.
For more detailed instructions, technical support, or warranty claims, please refer to the official user manual PDF or contact Shenzhen Mekede Technology Co. Ltd. directly.
Official User Manual (PDF): View User Manual PDF