1. Introduction
Thank you for choosing the Pzsunly LED Under Cabinet Light. This product provides convenient, dimmable lighting for various areas in your home, controlled wirelessly via a remote or directly by touch. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Safety Information
- This product is not waterproof. Do not install it in damp places or outdoors to prevent damage and ensure safety.
- Ensure batteries are inserted with correct polarity.
- Keep out of reach of children.
- Do not mix old and new batteries, or different types of batteries.
- Dispose of used batteries responsibly according to local regulations.
3. Package Contents
Depending on your purchase, your package may include:
- LED Cabinet Lights (1, 3, or 5 pieces)
- Wireless Remote Control (1 piece)
- Adhesive pads for mounting
Note: Batteries are NOT included and must be purchased separately.
4. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Pzsunly |
| Model Number | Remote Cabinet Light |
| Material | ABS |
| Installation Method | Assembly |
| Power Source | DRY BATTERY (3*AAA per lamp, 2*AAA for remote) |
| Voltage | 3V (Lamps), 3V (Remote) |
| Output Voltage & Power | 4.5V, 3W |
| COB Luminous Flux | 80-120LM |
| Lifespan | 50000 Hours |
| Is Dimmable | Yes |
| Is Smart Device | Yes |
| Power Generation | Switch |
| Switch Type | Tap or Remote Control |
| Control Distance | Up to 15 feet (approx. 4.5 meters) |
| Lamp Size | 90*90*23mm (approx. 3.5 inch diameter) |
| Remote Size | Approx. 2.7 inch width, 3.2 inch height |
| Certification | CCC |
| Origin | Mainland China |
5. Setup and Installation
Before installation, ensure you have the required AAA batteries (3 for each lamp, 2 for the remote control).
5.1. Battery Installation
- For the LED Lamps:
- Gently twist the back cover of the lamp counter-clockwise to open it.
- Insert 3 AAA batteries, ensuring correct polarity (+/-).
- Align the cover and twist clockwise to securely close it.
Figure 2: Lamp Battery Installation (Twist to Open)
Figure 3: Lamp Battery Compartment and Adhesive - For the Remote Control:
- Open the battery compartment cover on the back of the remote control.
- Insert 2 AAA batteries, observing correct polarity.
- Close the battery compartment cover securely.
5.2. Mounting the Lights
- Clean the surface where you intend to mount the lights. Ensure it is dry and free of dust or grease.
- Peel off the protective film from the adhesive pad on the back of each lamp.
- Press the lamp firmly onto the desired surface for a few seconds to ensure a strong bond.
- These lights are suitable for kitchens, cabinets, counters, bookshelves, garages, basements, wardrobes, or similar dark places.
6. Operating Instructions
6.1. Using the Remote Control
The remote control allows for convenient operation of your LED cabinet lights from up to 15 feet away. One remote can control multiple lights simultaneously, especially if they are installed nearby. If lights are separated by distance, they can be controlled independently.
- On/Highlight Button (-): Press to turn the lights on or to increase brightness to the highest level.
- Turn Off Button (O): Press to turn the lights off.
- Adjust Brightness Button (☀): Press to cycle through different brightness levels (High to Low, Low to High). The lights offer two adjustable brightness levels.
- 30 Min Timer Button (30 min.): Press to set the lights to automatically turn off after 30 minutes.
6.2. Manual Operation
- On/Off: You can also turn the light on or off by simply clicking the lens switch (center button) on the light itself.
7. Maintenance
- Cleaning: Wipe the lights and remote control with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Battery Replacement: When the lights dim significantly or the remote control becomes unresponsive, it's time to replace the batteries. Follow the battery installation steps in Section 5.1.
8. Troubleshooting
| Problem | Possible Cause & Solution |
|---|---|
| Light does not turn on. |
|
| Light is dim or flickers. |
|
| Remote control not working. |
|
9. User Tips
- Users have noted the lights provide good, bright illumination.
- When choosing light color, be aware that the "warm white" option might appear as a combination of yellow and white LEDs, which some users find less appealing for living areas. It is generally well-suited for functional spaces like cabinets.
- Consider the intended application carefully. While versatile, some users prefer these lights specifically for cabinets, wardrobes, and utility areas rather than main living spaces due to the light quality.
10. Frequently Asked Questions (FAQ)
- Q: Are these lights suitable for outdoor use?
- A: No, this product is not waterproof and should not be installed in damp places or outdoors.
- Q: Can one remote control all the lights if I buy multiple sets?
- A: Yes, one remote control can operate multiple lights simultaneously, especially if they are installed in close proximity. If lights are spaced out, you can control them individually.
- Q: What type of batteries do these lights and remote use?
- A: Each LED lamp requires 3 AAA batteries, and the remote control requires 2 AAA batteries. Batteries are not included.
11. Warranty and Support
For any product issues, please contact the seller or retailer from whom you purchased the Pzsunly LED Under Cabinet Light. Keep your purchase receipt as proof of purchase. Specific warranty details may vary by region and retailer.
You can also refer to the User Manual (PDF) for additional information.