MARPOU XD-1003

Contents

MARPOU Smart LED Ceiling Lamp User Manual

Model: XD-1003

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MARPOU Smart LED Ceiling Lamp. Please read this manual thoroughly before installation and use, and retain it for future reference.

MARPOU Smart LED Ceiling Lamp, 20-inch, white, ultra-thin design
The MARPOU Smart LED Ceiling Lamp, featuring an ultra-thin design.
Close-up of the 0.9-inch ultra-thin profile of the ceiling lamp, with a coin for scale, showing black and white versions.
The lamp's ultra-thin profile, approximately 0.9 inches (Pizza series).

Safety Information

  • Ensure the power supply is disconnected before installation or maintenance.
  • Installation should be performed by a qualified electrician if you are unsure.
  • Do not use the lamp in environments with high humidity or extreme temperatures.
  • Keep the lamp away from flammable materials.
  • Clean the lamp with a soft, dry cloth. Do not use abrasive cleaners.

Package Contents

Please check the package for the following items:

  • MARPOU Smart LED Ceiling Lamp
  • Mounting hardware (screws, anchors)
  • Remote Control (for dimmable models)
  • User Manual (this document)

Installation

Follow these steps to install your ceiling lamp:

  1. Prepare the Ceiling: Ensure the power is off at the circuit breaker. Mark the drilling points on the ceiling using the mounting bracket as a template.
  2. Install Mounting Bracket: Drill holes at the marked points. Insert wall anchors if necessary. Secure the mounting bracket to the ceiling using screws.
  3. Connect Electrical Wires: Connect the live, neutral, and ground wires from your ceiling to the corresponding wires on the lamp. Ensure connections are secure.
  4. Attach the Lamp: Align the lamp with the mounting bracket. Rotate the lamp 90 degrees clockwise to secure it firmly to the bracket.
Diagram showing three installation steps: 1. Connect cable, 2. Diagonal installation, 3. Rotate installation.
Visual guide for the installation process.
Installation video demonstrating the mounting and attachment process.

Operation

Remote Control Instructions (Dimmable Models)

The remote control allows for comprehensive adjustment of your dimmable ceiling lamp. Ensure the remote has batteries installed.

Diagram of remote control and smartphone app for dimmable models, and a wall switch for non-dimmable models.
Control options for the smart ceiling lamp.
  • ON/OFF: Power the lamp on or off.
  • Brightness+ / Brightness-: Adjust the light intensity.
  • CCT+ / CCT-: Adjust the color temperature (Cool White to Warm White).
  • Adjust 3 color temperature: Cycles through preset color temperatures.
  • Night mode: Sets brightness to 20% and color temperature to 4000K.
  • Match code / Clean code: Used for pairing or unpairing the remote with the lamp.
  • Brightness: 50%: Sets brightness to 50%.
  • Timing: 60s delay light off: Activates a 60-second delay before turning off the light.
  • No function: Indicates a button with no assigned function.

APP Connection and Control

For smart control features, download the "LampSmart Pro" app and follow these steps:

  1. Download APP: Search for "LampSmart Pro" on the App Store (iOS) or Google Play Store (Android) and install it.
  2. Switch Display Language: Open the app and select your preferred display language.
  3. Click to Add Device: Navigate to the device addition section within the app.
  4. Set a Name for the Device: Assign a unique name to your ceiling lamp for easy identification.
  5. Turn on Phone's Bluetooth: Ensure Bluetooth is enabled on your smartphone.
  6. Device is Added: The app will detect and add the lamp.
  7. Control: Once added, the lamp can be adjusted via the app, including CCT and brightness.

Non-Dimmable Models

Non-dimmable models offer three fixed color temperature choices, typically controlled via a standard wall switch:

  • Cold White
  • Warm White
  • Natural White

These models do not support remote or app control for dimming or CCT adjustment.

Maintenance

  • Cleaning: To clean the lamp, ensure the power is off. Use a soft, dry, or slightly damp cloth. Avoid harsh chemicals or abrasive materials that could damage the finish.
  • Bulb Replacement: The LED bulbs are integrated and not user-replaceable. The lamp has a long lifespan of approximately 30,000 hours.
  • Inspection: Periodically check the lamp for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.No power supply; Loose wiring; Faulty lamp.Check circuit breaker and wall switch. Ensure wires are securely connected. If problem persists, contact support.
Remote control not working.Batteries low/dead; Remote not paired; Obstruction.Replace batteries. Re-pair the remote with the lamp (refer to "Match code" instruction). Ensure no obstructions between remote and lamp.
App cannot connect to the lamp.Bluetooth off; Incorrect app; Lamp not in pairing mode.Ensure phone's Bluetooth is on. Verify you are using "LampSmart Pro" app. Follow app's "Add Device" steps carefully.
Light flickers or dims unexpectedly.Unstable power supply; Loose connection; Incompatible dimmer switch (for non-dimmable models).Check power supply stability. Verify wiring connections. Ensure non-dimmable models are not connected to a dimmer switch.

Specifications

FeatureDetail
Brand NameMARPOU
Model NumberXD-1003
Item TypeCeiling Lights
Installation MethodSelf-Contained, Surface Mounted
Body MaterialPlastic (PP/Plastic)
FinishPC, Painted
Light SourceLED Bulbs (Included)
Base TypeWedge
Is DimmableYes (for Dimmable models)
Is Smart DeviceYes
FeaturesSmart Luminaire, Remote Control, APP Control, Bluetooth, WIFI
Switch TypeREMOTE CONTROL (and APP control for smart models)
Voltage90 - 260 V (Operating range: 85V-265V)
Power SourceAC
Luminous Flux2000-82000 LM (Varies by wattage)
Lifespan (Warranty)30000H
Color OptionsBlack, White
CCT OptionsCold White, Natural Light, Warm White, Brightness Dimmable
Application AreaKitchen, Dining Room, Bed Room, Foyer, Study, Bathroom (Lighting Area: 10-15m² for 24W, up to 30-40m² for 48W)
CertificationsCE, FCC, ROHS
Table showing power, size, lumen, and light area for 24W, 28W, 38W, and 48W models. Also lists voltage, color, and CCT options.
Detailed specifications by wattage.
PowerSize (Diameter*Height)LumenLight Area
24WD9*H0.9 inch2640LM8-15m²
28WD12*H0.9 inch3080LM15-20m²
38WD16*H0.9 inch4180LM20-30m²
48WD20*H0.9 inch5280LM30-40m²
Diagram showing the dimensions of the 24W lamp (9 inches diameter, 0.9 inches height) and its lumen output and recommended area, along with M1 (Dimmable) and M2 (Non-dimming) modes.
Dimensions and modes for the 24W model.

User Tips

  • For optimal smart control, ensure your Wi-Fi network is stable and your smartphone's Bluetooth is enabled when pairing.
  • If you have multiple smart lamps, consider naming them distinctly in the app for easier control.
  • The remote control is particularly useful for quick adjustments without needing your phone.

Frequently Asked Questions (FAQ)

Q: Does this lamp work with Google Home?
A: The product description indicates "Smart Luminaire" and "APP Bluetooth WIFI" features. While direct Google Home compatibility is not explicitly stated, many smart devices with app control and Wi-Fi capabilities can be integrated with smart home ecosystems. Please check the "LampSmart Pro" app for integration options or consult the manufacturer's website for the latest compatibility information.

Warranty and Support

The MARPOU Smart LED Ceiling Lamp comes with a stated lifespan of 30,000 hours. For any technical support, warranty claims, or further inquiries, please contact the seller or manufacturer directly through their official channels.

A user manual in PDF format is also available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.