1. Product Introduction
This data cable is a highly compatible and multi-scenario digital accessory, suitable for various digital devices such as mobile phones, Bluetooth headsets, smart watches, etc. It supports dual functions of charging and data transmission (some models only support charging). It is compatible with all data cable models sold in our store, regardless of power, port type (USB-A/USB-C, etc.) or material, and can be used universally. The product is exquisitely crafted with stable transmission and efficient charging. The cable is soft, easy to store and carry, suitable for various daily scenarios such as home, office, car and travel. It provides safe and reliable connection and power support for your digital devices, compatible with all data cable styles sold in our store. No need to distinguish specifications, plug and play.
2. Product Features
- All-Round Universal: Supports all mainstream digital device charging and data transmission protocols, compatible with all common ports such as USB-A, USB-C, etc. No need to distinguish device brands, models, nor the power or material of the data cable. All styles can be plug-and-play with extremely strong universality.
-
Safety Protection: Built-in intelligent protection mechanism (available in all models), effectively preventing overcurrent, overvoltage, short circuit, overheating and interface oxidation. It avoids damaging the device battery and interface due to abnormal current, and also protects the data cable itself, extending the service life of the data cable and the device, compatible with data cables of various powers and materials.
Figure 2: Diagram illustrating the intelligent chip for safe and stable charging, managing fluctuating voltage and ensuring steady output. -
Efficient and Stable: The charging power is fully compatible with all power segments in our store, supporting normal charging and fast charging modes (need to match the corresponding fast charger and fast-charging supported device) with high charging efficiency. Models supporting data transmission can achieve high-speed file synchronization, meeting the needs of fast transmission of photos, videos, documents and other data with stable and uninterrupted transmission.
Figure 3: Cross-section view of the oxygen-free copper wires, highlighting efficient power delivery and fast charging capabilities, such as 86% charge in 30 minutes for a Huawei Mate 50. 
Figure 4: Illustrates rapid data transfer, capable of moving 1GB in 24 seconds at a maximum speed of 60MB/s. - Convenient and Practical: The length of the cable is compatible with all specifications in our store. It is soft, easy to bend and not tangled, which can be easily put into pockets or backpacks without taking up space. The interface is smooth to plug and unplug, suitable for various usage scenarios such as car, desktop and mobile emergency. A single cable can meet the connection needs of multiple devices, and all styles have the same operation.
-
Durable and Tough: Regardless of the cable material (such as TPE, braided wire, etc.), all are made of high-quality and environmentally friendly materials, with excellent tensile, bending and wear resistance. The interface is reinforced, so it is not easy to break or loose after long-term plugging, unplugging and bending. It is resistant to high and low temperatures and aging, can adapt to different environments, and is not easy to be damaged after long-term use.
Figure 5: Details of the cable's construction, including considerate slope design for super fast charging without burning, and a reinforced net tail tested for over 3000 bends. 
Figure 6: Comparison of new technology (Nickel-Plated Tungsten + Platinum) to antiquated technology, highlighting the solution to pin blackening and corrosion for extended service life.
3. Setup and Operation
- Connect the Device: Insert one end of the data cable into a charger head, computer USB interface, or car charger interface. Insert the other end into the interface of the digital device that needs to be charged or transmit data. Ensure the plug is firmly inserted. All models and specifications operate identically.
-
Start Charging: After a successful connection, the device will automatically enter the charging state. If both the device and the charger support fast charging, it will automatically switch to fast charging mode without manual operation. This is compatible with data cables of all powers.
Figure 7: A mobile phone connected to the Type-C cable, illustrating the fast charging capability, reaching approximately 86% charge in 30 minutes. - Data Transmission: For models supporting data transmission, after connecting the computer and the digital device, the computer will automatically recognize the device. You can then copy, paste, synchronize, and perform other data operations (photos, videos, documents) through the computer's file manager. Note that only charging models do not have this function.
- Stop Using: After charging or data transmission is complete, it is recommended to hold the data cable plug and pull it out smoothly. Do not pull the cable itself forcefully to avoid breakage or looseness of the cable and interface. All styles have the same operation.
- Multi-Scenario Use: The cable is designed for various usage scenarios. In a car, it can connect to the car charger. For desktop use, it can connect to a power adapter or computer for simultaneous charging and data transmission. When traveling, it can be easily carried for emergency use with various devices.
4. Maintenance
- To extend the service life of the data cable and the device interface, avoid frequent plugging and unplugging. Plug and unplug gently to prevent violent operation.
- Regularly clean the dust, debris, and oxide layer of the data cable interface. Gently wipe with a dry soft cloth to avoid poor contact affecting charging speed and data transmission.
- Avoid placing the data cable close to sharp objects to prevent scratches or cuts. Avoid over-bending when storing; the cable can be naturally wound to extend its service life.
5. Safety Precautions
Please strictly adhere to the following precautions to prevent damage to the data cable, equipment, or personal injury due to improper use. These guidelines apply to all data cable models sold in our store.
⚠️ WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.
- Do not use data cables that are damaged, broken, loose, rusted, or aging. This can lead to equipment failure, electric shock, and other hazards caused by poor contact or short circuits, regardless of the cable's power, material, or port type.
- If the data cable exhibits abnormal heat, odor, becomes hot, or has a loose or damaged interface during use, stop using it immediately. Replace it with a new data cable and do not attempt to repair or continue using it yourself. This applies to all models.
- Do not immerse the data cable in water, place it in a humid environment, or near fire sources and high-temperature objects (e.g., heating, stove, direct sunlight). This prevents short circuits caused by liquid entering the interface or damage to the cable material due to high temperatures. This applies universally to all styles.
- Do not allow minors to use the cable without adult supervision. This prevents damage to the data cable, device interface, or electric shock hazards from biting, pulling the cable, or inserting the interface improperly. Do not use the data cable as a toy.
- Do not over-bend, pull, or twist the cable, especially at the connection between the interface and the cable. This can cause internal lines to break and affect performance. Such operations are prohibited for data cables of all materials and specifications.
- When not in use for a long time, store the data cable neatly in a dry, ventilated, and cool place. Avoid extrusion, exposure to the sun, high-temperature baking, or proximity to sharp objects to prevent damage and aging.
- This product is intended for charging and data transmission of small digital devices only. Do not use it for devices exceeding its rated power to prevent damage to the data cable and connected devices. All models must comply with this.
- When plugging and unplugging the data cable, always hold the plug and operate it smoothly. Do not pull the cable body forcefully to prevent separation of the cable and plug, breakage of internal lines, or damage to the device interface. This applies to all styles.
- Do not scratch or pierce the cable or interface with sharp objects to avoid damaging internal lines and affecting safety and service life.
6. Specifications
| Item | Specification Parameters |
|---|---|
| Applicable Ports | USB-A/USB-C, etc. (covering all data cable port types sold in our store, corresponding models are compatible with corresponding ports) |
| Charging Power | Compatible with all power segments in our store, supporting normal charging and fast charging (needs to be compatible with both device and charger, universally compatible with all models) |
| Data Transmission Rate | Supports high-speed transmission (some models) / only supports charging (some models), in line with corresponding transmission protocol standards, compatible with all styles |
| Supported Protocols | All mainstream charging and data transmission protocols such as USB 2.0, USB 3.0, QC3.0, PD2.0, fully compatible with various devices |
| Product Material | Cable: TPE/braided wire, etc. (all models are high-quality and environmentally friendly materials); Interface: Gold-plated/nickel-plated and other anti-oxidation materials (unified standard for all styles) |
| Working Temperature | 0°C - 45°C (universal for all data cable models) |
| Storage Temperature | -20°C - 60°C (universal for all data cable models) |
| Cable Length | Compatible with all length specifications in our store, meeting the needs of different usage scenarios such as home, car and travel |
| Maximum Current | 6A |
7. User Tips
- Always handle the cable gently when plugging and unplugging to prolong its lifespan and prevent damage to device ports.
- Keep the cable connectors clean. A quick wipe with a dry, soft cloth can prevent connection issues and maintain optimal charging and data transfer speeds.
- For fast charging, ensure both your device and charger are compatible with the fast charging protocols supported by this cable. Mismatched components may result in standard charging speeds.
- Store the cable properly, avoiding sharp objects and excessive bending, to maintain its integrity and performance over time.
8. Warranty and Support
For detailed warranty information, return policies, and customer support, please refer to the official seller's website or contact their customer service directly. This manual provides operational guidance and product specifications.
A comprehensive user manual is also available in PDF format for download: Download User Manual (PDF).
Thank you for choosing our universal data cable! We hope you have a pleasant experience.