OPUYYM 18650 Battery Power Bank Case

Contents

OPUYYM 3x18650 DIY Power Bank Case User Manual

Model: 18650 Battery Power Bank Case

1. Product Overview

The OPUYYM 3x18650 DIY Power Bank Case is a versatile, solderless kit designed to create your own portable power bank. It accommodates three 18650 flat-head batteries (not included) and features integrated charging cables (USB, Micro-USB, Type-C, and Lightning), dual USB output, dual input ports (Type-C and Mini-USB), a digital power display, and a dual LED flashlight with adjustable brightness. This compact device is ideal for charging multiple smartphones and other USB-powered devices on the go.

OPUYYM Power Bank Case Features

Figure 1: Product overview highlighting dual input/output, flashlight, and internal battery compartment.

2. Setup Instructions

2.1 Important Notes Before Installation

  • This product is a solderless mobile power supply kit (circuit board + shell) and is not a finished product.
  • Batteries, data cables, and box packaging are NOT included.
  • You must purchase three 18650 flat-head batteries separately.
  • All three batteries must have the same capacity and be from the same batch for optimal performance and safety.
  • Once assembled, the shell cannot be easily disassembled again. Ensure correct installation on the first attempt.

2.2 Battery Installation

  1. Test Batteries: Before installation, test each 18650 battery to ensure it is normal and usable.
  2. Orient Batteries: Carefully insert each battery into its slot. Ensure the positive (+) end of the battery is facing upwards, aligning with the protruding point surface of the shrapnel (spring contact). The negative (-) end should align with the coil surface of the shrapnel.
  3. Prevent Reverse Installation: Installing batteries backward (reverse polarity) will permanently damage the circuit board. The spring contact in the battery compartment is the positive pole, and the flat contact is the negative pole.
  4. Final Check: After installing all three batteries, test the power bank for normal charging and discharging functionality before securely closing the lid.
Battery Installation Diagram

Figure 2: Diagram illustrating correct 18650 battery polarity for installation. The positive end aligns with the protruding contact, and the negative end with the flat contact.

3. Operating Instructions

Power Bank Port Diagram

Figure 3: Power bank port and feature identification. 1: Type-C Input/Output, 2: Mobile Power Switch, 3 & 4: LED Flashlight, 5: Mobile Power Display, 6: USB Input Cable, 7: Micro Output Cable, 8: Type-C Output Cable, 9: iPhone Output Cable, 10: Mobile Power Lanyard, 11: USB Input Port.

3.1 Charging the Power Bank

To charge your OPUYYM Power Bank, connect it to a power source (like a wall adapter or computer USB port) using either the integrated USB input cable (6) or an external cable connected to the Type-C Input/Output port (1) or the USB Input Port (11). The digital display (5) will show the charging progress.

Charging the Power Bank

Figure 4: The power bank being charged via its integrated USB input cable from a wall adapter.

3.2 Charging External Devices

Press the Mobile Power Switch (2) to activate the power bank. Connect your device using one of the integrated output cables (Micro-USB 7, Type-C 8, or iPhone 9). You can also use the Type-C Input/Output port (1) as an output. The power bank supports simultaneous charging of multiple devices.

Charging a Smartphone

Figure 5: The power bank charging a smartphone using its integrated cable.

Charging Multiple Devices

Figure 6: The power bank simultaneously charging multiple smartphones using its integrated cables.

3.3 Digital Power Display

The large screen digital display (5) shows the remaining power status in increments (e.g., 25, 50, 70, 100), allowing you to monitor the battery level of your power bank at any time.

3.4 LED Flashlight Operation

The power bank features dual LED flashlights (3 & 4). Press and hold the Mobile Power Switch (2) to turn the flashlight on or off. Short presses can cycle through 4 adjustable brightness levels.

LED Flashlight On

Figure 7: The power bank with its dual LED flashlights illuminated.

4. Maintenance

  • Keep the power bank dry. Do not expose it to moisture or liquids.
  • Avoid extreme temperatures. Do not store in very hot or very cold environments.
  • Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Handle 18650 batteries with care. Do not short-circuit, puncture, or expose them to fire.
  • If the power bank will not be used for an extended period, charge it to about 50% and store it in a cool, dry place.

5. Troubleshooting

  • Power Bank Not Charging:
    • Ensure the 18650 batteries are correctly installed with the correct polarity.
    • Check that the charging cable is securely connected to both the power bank and the power source.
    • Verify the power source is active.
  • Devices Not Charging from Power Bank:
    • Press the Mobile Power Switch to activate the power bank.
    • Ensure the integrated cable or external cable is securely connected to your device.
    • Check if the power bank has sufficient charge.
  • Slow Charging of Devices:
    • Ensure your device is compatible with 5V/2A charging. Some devices may have specific charging requirements.
    • Using high-quality cables can improve charging speed.
  • Flashlight is Dim:
    • The flashlight is designed for general illumination; its brightness may vary based on battery charge level.
    • Ensure the power bank is adequately charged.

6. Specifications

BrandOPUYYM
Model Number18650 Battery Power Bank Case
TypeBattery Storage Box
Input5V/2A (Type-C, USB Input Port)
Output5V/2A (Integrated Micro-USB, Type-C, Lightning cables; Type-C port)
Battery Support3 x 18650 Flat-Head Batteries (not included)
Dimensions (L x W x H)99.54mm x 66.24mm x 32mm
FeaturesIntegrated 4-in-1 cables, Digital Power Display, Dual LED Flashlight (4 brightness levels), 10W Fast Charging/Discharging
OriginMainland China
Power Bank Dimensions

Figure 8: Dimensions of the OPUYYM 3x18650 DIY Power Bank Case.

7. User Tips

  • Remember that this product is a case only; 18650 batteries must be purchased separately.
  • Utilize any spare 18650 batteries you may have to make this power bank an economical and effective portable charging solution.
  • Always ensure all three 18650 batteries are of the same capacity and type for optimal performance and safety.

8. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.