Introduction
This manual provides essential information for the safe and efficient operation of your SUITU Wireless Car Vacuum Cleaner, model ST-6645Pro. Please read all instructions thoroughly before use and retain this manual for future reference.
Important Safety Information
Please read all contents of this manual thoroughly before using this product. Failure to follow these instructions may result in serious personal injury, property damage, or damage to the product itself.
- Any operation not in accordance with the instructions in this manual may result in serious personal injury, property damage, or damage to the product itself.
- We will not be held liable for any loss or damage caused by failure to operate the product in accordance with the instructions outlined in this manual.
- Keep this manual for future reference. If you transfer the product to a third party, ensure the manual is provided with the product.
- Pay special attention to safety instructions to avoid accidents and prevent damage to the product.
- Exercise caution when using the product to avoid hazardous situations and potential injury.
- This product should not be used in the presence of children. Ensure the product is stored in a secure location, out of reach, and not operated around children or individuals unable to assess safety risks.
- Follow all battery safety warnings and storage instructions in this manual to prevent fire, injury, or damage to the product.
Product Specifications
| Feature | Specification |
|---|---|
| Product Model | ST-6645Pro |
| Rated Voltage | 7.4V |
| Rated Input | 5V-2A |
| Dust cup capacity | 0.2L |
| Interface Type | Type-C |
| Product Size | 21.3cm x 16.3cm x 6.7cm |
| Appearance Material | ABS |
| Motor Type | DC Brushless Motor |
| Special Features | Work for Home, Work for Car |
| External Testing Certification | CE |
| Certification | GS |
| Battery Included | Yes |
The vacuum cleaner features a 95000PA brushless motor for powerful performance and reduced resonance noise. It is equipped with a 4000mAh high-performance battery, offering long battery life of up to 45 minutes for daily cleaning tasks.
Internal design features for powerful and quiet operation, including brushless motor, motor suspension, pipe optimization, impeller optimization, and GEDE BAO cotton to reduce rotor vibration sound.
High-performance 4000mAh battery for extended use.
Product Diagram and Accessories
Overview of the vacuum cleaner and its included accessories.
Key Components:
- HEPA Filter
- Power switch
- Handle
- Dust collecting bin
- USB-C Charge Port
- Exhaust / blower port
Accessories List:
- Charging Cable (USB-C)
- Multifunctional suction nozzle combination
- Air exhaust and blowing nozzle combination
- Carrying Bag (for some versions)
- Additional filters (for some versions)
The vacuum cleaner comes with multiple accessories for versatile cleaning, including various nozzles for suction and blowing functions.
Installation Instructions
Installing the Dust Collecting Bin to the Vacuum
- Install the HEPA filter into the dust collecting bin as shown in the figure.
- Rotate the dust collecting bin assembly counterclockwise. A "click" sound indicates successful installation.
Visual guide for installing the dust collecting cup and HEPA filter.
Dust Collection Mode
- Insert the two-in-one flat suction nozzle into the suction port of the host.
Blowing Mode
- According to the arrow direction as shown in the figure, install the air nozzle on the host.
Extraction Mode
- According to the arrow direction as shown in the figure, install the air extraction nozzle on the host.
Operation Instruction
Preparation Before Use
- Charge the device using a 1A-2A USB power adapter. Check the power output of the USB power adapter as this will affect charge time.
- Ensure that all parts of the wireless vacuum cleaner are properly assembled. Verify that the power is sufficient to operate the product correctly.
Charging Instructions
- Connect one end of the included USB-C charging cable to the charge port on the device and the other end to a USB power adapter.
- The red indicator light will indicate that the device is charging, and a green light will remain on when it is fully charged.
- Do not operate the vacuum while it is charging.
- Fully charge the battery before first use. It should take up to 2 hours to fully charge the battery.
- For long-term storage, ensure to fully charge the battery.
Powering On
- Press and hold the power button until the vacuum turns on. As soon as the vacuum is on, release the power button. The vacuum will toggle on.
- Press the power button once to switch to high power mode, while the vacuum is on.
Powering Off
- Press the power button once while the vacuum is in high power mode.
Illustration of the power button and charging port for operation.
The compact design allows for easy storage in a car's cup holder.
Maintenance
Cleaning and Maintenance
Clean the dust collecting cup
- First, rotate the dust collecting cup in the direction shown in the figure and remove it from the host.
- Take out the HEPA filter screen in the dust bin and dump the garbage into the garbage can.
- Separate the HEPA filter cover and dust collecting cup in sequence, and clean the HEPA filter cover with a brush. The dust collecting cup can be washed and dried before use.
- To reinstall the dust bin, put the HEPA filter screen into the dust bin, and rotate and tighten it in the opposite direction according to step 1 above.
The HEPA filter is washable and reusable for sustained performance.
Battery Safety
- Always charge the Torque Pro in a well-ventilated area away from flammable materials, and on a hard, non-combustible surface such as tiles or concrete.
- Always disconnect the product from the charger once the battery is fully charged. Overcharging can lead to overheating, fire, or explosion.
- Never leave the product unattended while charging. Ensure you are present during the entire charging process.
- Do not store the Torque Pro in environments where the temperature exceeds 25°C (77°F).
- Never leave the Torque Pro in a car that is exposed to high temperatures or direct sunlight.
- Do not store the Torque Pro in your vehicle, even in mild conditions. Always remove the product from your car when not in use.
- Do not store the Torque Pro in enclosed spaces within the vehicle, such as the glove box or trunk, where the temperature in the enclosed space exceeds 25°C (77°F), as these areas can become extremely hot and lack ventilation.
Troubleshooting
If you encounter any issues with your SUITU Wireless Car Vacuum Cleaner, please refer to the following common troubleshooting steps:
- Vacuum not turning on: Ensure the battery is fully charged. Check that the power button is pressed and held correctly.
- Reduced suction power: Check if the dust collecting bin is full and needs emptying. Inspect the HEPA filter for clogs and clean it as per maintenance instructions. Ensure all attachments are securely installed.
- Device not charging: Verify that the USB-C charging cable is properly connected to both the vacuum and a working USB power adapter (1A-2A). Check the indicator light for charging status (red for charging, green for full).
- Unusual noise during operation: Ensure all parts are correctly assembled and nothing is obstructing the motor or impeller. If the noise persists, refer to the product diagram to ensure no components are loose.
For persistent issues not resolved by these steps, please contact customer support.
User Tips
- Size Expectation: While powerful, the vacuum is designed to be compact for portability. Manage expectations regarding its physical size.
- Accessory Check: Ensure all promised accessories, especially filters and carrying bags, are included upon delivery. If not, contact the seller immediately.
- Charging Cable: If you need a replacement charging cable, ensure it is a USB-C type compatible with 5V-2A input.
Frequently Asked Questions (FAQ)
- Q: Sveiki man reikalingas laidas ar turite? (Hello, I need a cable, do you have one?)
- A: The vacuum cleaner comes with a USB-C charging cable. If you require a replacement, please ensure it is a USB-C type with 5V-2A input. You may need to purchase a generic compatible cable from an electronics retailer.
Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact the SUITU customer service directly. Keep your purchase receipt as proof of purchase.
A digital version of this user manual is available as a PDF: View User Manual (PDF)